Makita Chainsaw Oiler Not Working: [Reasons + Fixed]

As a chainsaw owner, there are few things more frustrating than having your oiler stop working. Not only does it mean that your saw is no longer properly lubricated, but it can also lead to damage to the engine. If your Makita chainsaw oiler is not working, it’s important to troubleshoot the problem and resolve it as quickly as possible.

In this guide, I will walk you through the steps of diagnosing and repairing a Makita chainsaw oiler that is not working. I will also provide some tips on how to prevent this problem from happening in the future.

Most Common Reasons Why Makita Chainsaw Oiler Not Working

Makita Chainsaw Oiler Not Working

There are a few reasons why your Makita chainsaw oiler might not be working. Here are the most common causes and solutions:

The oiler is not plugged in. Make sure that the oiler is plugged into an outlet and that the outlet is working.
The oiler is not turned on. Check the oiler’s power switch to make sure that it is turned on.
The oiler’s tank is empty. Fill the oiler’s tank with oil.
The oiler’s hose is clogged. Clean the oiler’s hose to remove any obstructions.
The oiler’s pump is not working. Replace the oiler’s pump if it is not working.

If you have checked all of these things and your Makita chainsaw oiler is still not working, you may need to contact a qualified chainsaw repair technician.

How to Troubleshoot: Makita Chainsaw Oiler Not Working

Check the Oil Level

First and foremost
when troubleshooting a Makita chainsaw oiler that’s not working
it’s crucial to check the oil level in the reservoir. Ensure that there is an adequate amount of bar and chain oil in the tank. Low oil levels can lead to improper lubrication
causing the oiler to appear faulty.

Inspect the Oil Filter and Line

Next
inspect the oil filter and oil line for any clogs or blockages. Over time
debris and sawdust can accumulate in the oiling system
hindering the flow of oil to the bar and chain. Use compressed air or a small brush to clear any obstructions in the oil filter and line.

Examine the Oiler Pump

Check the oiler pump for any signs of damage or wear. A malfunctioning pump can result in insufficient oil delivery to the bar and chain. Look for any cracks
leaks
or irregularities in the pump assembly. If any issues are found
consider replacing the oiler pump with a genuine Makita replacement part.

Verify the Oiler Worm Gear

Inspect the oiler worm gear for proper alignment and functionality. The worm gear is responsible for driving the oil pump
and any misalignment or damage can impede the oiling process. Ensure that the worm gear is securely in place and engages with the oil pump correctly.

Check the Oiler Drive Gear

Similarly
examine the oiler drive gear for any wear or damage. The drive gear transfers power from the chainsaw engine to the oil pump
and any issues with the gear can lead to oiling problems. Replace the drive gear if there are signs of wear or damage to restore proper oiling function.

Inspect the Oil Passage

Carefully inspect the oil passage within the chainsaw for any blockages or restrictions. Clear any obstructions using a small wire or cleaning tool to ensure that the oil can flow freely from the reservoir to the bar and chain. A clear oil passage is essential for effective lubrication.

Conclusion

In conclusion
troubleshooting a Makita chainsaw oiler that’s not working involves a systematic inspection of various components
including the oil level
filter
pump
worm gear

FAQs: Makita Chainsaw Oiler Not Working

Why is my Makita chainsaw oiler not working?

There are a few possible reasons why your Makita chainsaw oiler may not be working. Here are some of the most common causes:

The oiler is not properly adjusted. The oiler may not be delivering enough oil to the chain, or it may be delivering too much oil. To check the adjustment, follow the instructions in your chainsaw’s owner’s manual.
The oiler is clogged. The oiler may be clogged with sawdust or other debris, which can prevent it from delivering oil to the chain. To clean the oiler, remove the oiler cover and clean the inside of the oiler with a small brush.
The oiler is damaged. The oiler may be damaged if it has been dropped or if it has been subjected to excessive vibration. If you suspect that the oiler is damaged, you should have it replaced.

How do I adjust the oiler on my Makita chainsaw?

To adjust the oiler on your Makita chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover.
3. Locate the oiler adjustment screw.
4. Turn the adjustment screw clockwise to increase the oil flow, or counterclockwise to decrease the oil flow.
5. Reinstall the oiler cover.

How do I clean the oiler on my Makita chainsaw?

To clean the oiler on your Makita chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover.
3. Use a small brush to clean the inside of the oiler.
4. Reinstall the oiler cover.

How do I know if my Makita chainsaw oiler is damaged?

There are a few signs that your Makita chainsaw oiler may be damaged. These include:

The chainsaw is not making any oil.
The chainsaw is making excessive smoke.
The chain is getting hot.
The chain is wearing out quickly.

If you notice any of these signs, you should have the oiler checked by a qualified technician.

What should I do if my Makita chainsaw oiler is not working?

If your Makita chainsaw oiler is not working, you should do the following:

1. Check the oiler adjustment.
2. Clean the oiler.
3. Check for damage to the oiler.

If you have checked the oiler and it is still not working, you should have it replaced.

Also Read: Mcculloch Chainsaw Oiler Not Working