Makita Electric Chainsaw Not Working: [How To Troubleshoot]

As a chainsaw repair professional, I’ve seen my fair share of Makita electric chainsaws that aren’t working. I know how frustrating it can be when your chainsaw won’t start or cuts poorly. That’s why I’ve put together this troubleshooting guide.

In this guide, I’ll walk you through the steps to diagnose and resolve the most common problems that cause Makita electric chainsaws to malfunction. I’ll also provide tips on how to prevent these problems from happening in the future.

By following the steps in this guide, you can quickly get your Makita electric chainsaw back up and running so you can get back to work.

Most Common Reasons Of Makita Electric Chainsaw Not Working

1. No power

The chainsaw is not plugged in
The power cord is damaged
The switch is turned off
The circuit breaker is tripped
The chainsaw’s battery is dead or not properly connected

2. Chain is stuck

The chain is too tight
The chain is worn out
The chain is dirty
The bar is bent

3. Chainsaw is not cutting

The chain is dull
The chain is not aligned properly
The guide bar is damaged
The chainsaw is not sharp enough

4. Chainsaw is overheating

The chainsaw is running too fast
The chainsaw is not getting enough air
The chainsaw’s air filter is dirty
The chainsaw’s cooling fins are clogged

How to Troubleshoot: Makita Electric Chainsaw Not Working

Symptoms

There are a few different symptoms that can indicate that your Makita electric chainsaw is not working properly. These include:

The chainsaw won’t start
The chainsaw starts but won’t stay running
The chainsaw runs but doesn’t produce enough power
The chainsaw makes a strange noise
The chainsaw vibrates excessively

Troubleshooting

If your Makita electric chainsaw is not working properly, you can troubleshoot the problem by following these steps:

1. Check the power cord. Make sure that the power cord is plugged into an outlet and that the outlet is working properly.
2. Check the battery. If your chainsaw is battery-powered, make sure that the battery is charged and that it is inserted properly into the chainsaw.
3. Check the air filter. The air filter on your chainsaw helps to keep the engine clean. If the air filter is dirty, it can restrict airflow and cause the chainsaw to run poorly. To clean the air filter, remove it from the chainsaw and rinse it with warm water. Allow the air filter to dry completely before reinstalling it.
4. Check the spark plug. The spark plug is responsible for igniting the fuel in your chainsaw’s engine. If the spark plug is dirty or damaged, it can cause the chainsaw to not start or to run poorly. To check the spark plug, remove it from the chainsaw and inspect it for damage. If the spark plug is dirty, clean it with a spark plug cleaner. If the spark plug is damaged, replace it with a new one.
5. Adjust the carburetor. The carburetor on your chainsaw helps to mix the fuel and air in the correct proportions. If the carburetor is not adjusted properly, it can cause the chainsaw to run poorly. To adjust the carburetor, you will need to consult your chainsaw’s owner’s manual.
6. Take your chainsaw to a qualified repair technician. If you have tried troubleshooting the problem yourself and you are still unable to get your chainsaw to work properly, you should take it to a qualified repair technician. A repair technician will be able to diagnose the problem and make the necessary repairs.

Preventative Maintenance

The best way to avoid problems with your Makita electric chainsaw is to perform regular preventative maintenance. This includes:

Cleaning the air filter regularly
Replacing the spark plug regularly
Adjusting the carburetor regularly
Inspecting the chainsaw for damage and wear
Allowing the chainsaw to cool down completely before storing it

By following these simple steps, you can help to keep your Makita electric chainsaw running smoothly for years to come.

Also Check: Mcculloch Electric Chainsaw Not Working

FAQs: Makita Electric Chainsaw Not Working

Why is my Makita electric chainsaw not working?

There are a few possible reasons why your Makita electric chainsaw might not be working. Here are some of the most common causes and solutions:

The chainsaw is not plugged in properly. Make sure that the chainsaw is plugged into an outlet that is working and that the plug is securely inserted into the outlet.
The chainsaw’s battery is dead. If the chainsaw is not plugged in, check to see if the battery is charged. If the battery is not charged, you can either charge it or replace it with a new one.
The chainsaw’s chain is too loose or too tight. If the chain is too loose, it can come off the sprocket and cause the chainsaw to stop working. If the chain is too tight, it can damage the chainsaw’s engine. To check the chain tension, refer to your chainsaw’s owner’s manual.
The chainsaw’s air filter is dirty. A dirty air filter can restrict airflow to the chainsaw’s engine, causing it to overheat and stop working. To clean the air filter, refer to your chainsaw’s owner’s manual.
The chainsaw’s spark plug is fouled. A fouled spark plug can prevent the chainsaw from starting or running properly. To clean the spark plug, refer to your chainsaw’s owner’s manual.

How do I fix a Makita electric chainsaw that is not working?

Once you have determined the cause of the problem, you can fix your Makita electric chainsaw by following these steps:

1. Check the power cord. Make sure that the power cord is plugged into an outlet that is working and that the plug is securely inserted into the outlet.
2. Check the battery. If the chainsaw is not plugged in, check to see if the battery is charged. If the battery is not charged, you can either charge it or replace it with a new one.
3. Check the chain tension. If the chain is too loose, it can come off the sprocket and cause the chainsaw to stop working. If the chain is too tight, it can damage the chainsaw’s engine. To check the chain tension, refer to your chainsaw’s owner’s manual.
4. Clean the air filter. A dirty air filter can restrict airflow to the chainsaw’s engine, causing it to overheat and stop working. To clean the air filter, refer to your chainsaw’s owner’s manual.
5. Clean the spark plug. A fouled spark plug can prevent the chainsaw from starting or running properly. To clean the spark plug, refer to your chainsaw’s owner’s manual.

What are the safety precautions I should take when using a Makita electric chainsaw?

When using a Makita electric chainsaw, it is important to take the following safety precautions:

Wear safety glasses and gloves. Safety glasses will protect your eyes from flying debris, and gloves will protect your hands from cuts and abrasions.
Make sure the chainsaw is turned off and unplugged before you begin working. This will prevent the chainsaw from starting accidentally.
Do not operate the chainsaw while you are tired or under the influence of alcohol or drugs. This could lead to accidents.
Be aware of your surroundings and keep the chainsaw away from children and pets. The chainsaw is a dangerous tool and can cause serious injury if it is not used properly.
Never use the chainsaw to cut live electrical wires. This could cause a serious electrical shock.
Never use the chainsaw to cut wet wood. This could cause the chainsaw to slip and cause serious injury.
Keep the chainsaw’s chain sharp and properly lubricated. A dull chain can be dangerous and can cause the chainsaw to jump out of control.

What are the different types of Makita electric chainsaws?

Makita offers a variety of electric chainsaws to meet the needs of different users. Here are some of the different types of Makita electric chainsaws available:

Corded chainsaws: Corded chainsaws are powered by an electric cord that plugs into an outlet. They are typically less expensive than cordless chainsaws, but they are also limited by the length of the cord.
Cordless chainsaws: Cordless chainsaws are powered by a rechargeable battery. They are more expensive than corded chainsaws, but they offer the freedom of movement without being tethered to an outlet.
Top handle chainsaws: Top handle chainsaws are designed for one-handed operation.

 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *