North Star Industrial Hot Water Pressure Washer Heater Not Working [Fixed]

As a Pressure Washer Repair technician, I’ve seen my fair share of issues. I know how frustrating it can be when your pressure washer isn’t working properly, especially when you need it to get a job done. That’s why I’ve put together this troubleshooting guide to help you fix the problem quickly and easily.

In this guide, I’ll walk you through the steps to diagnose and repair a North Star Industrial Hot Water Pressure Washer Heater that’s not working. I’ll also provide tips on how to prevent this problem from happening in the future. So if you’re ready to get your pressure washer back up and running, let’s get started!

Reasons Why North Star Industrial Hot Water Pressure Washer Heater Not Working

1. No Power to the Heater Element

The most common reason for a North Star Industrial Hot Water Pressure Washer heater not working is that there is no power to the heater element. This can be caused by a number of things, including:
A blown fuse
A tripped circuit breaker
A loose or damaged connection
A faulty control board
To check for power to the heater element, use a multimeter to test the voltage between the two terminals of the element. If there is no voltage, you will need to troubleshoot the problem to find the source of the issue.

2. Faulty Heater Element

If the heater element is faulty, it will not be able to heat the water. This can be caused by a number of things, including:
A cracked or broken element
A shorted element
A corroded element
To check if the heater element is faulty, you can remove it from the pressure washer and test it with a multimeter. If the element is open or shorted, it will need to be replaced.

3. Clogged or Restricted Water Inlet

If the water inlet to the heater is clogged or restricted, the water will not be able to flow through the element and it will not be able to heat up. This can be caused by a number of things, including:
A build-up of sediment or scale
A kinked or pinched hose
A blocked filter
To check if the water inlet is clogged or restricted, you can remove the inlet hose from the heater and inspect it for any obstructions. If you find any obstructions, you can remove them and then reconnect the hose.

4. Faulty Thermostat

The thermostat controls the temperature of the water in the pressure washer. If the thermostat is faulty, it may not be able to maintain the desired temperature, which can cause the heater to overheat. This can be caused by a number of things, including:
A stuck thermostat
A faulty sensor
A damaged control board
To check if the thermostat is faulty, you can remove it from the pressure washer and test it with a multimeter. If the thermostat is not functioning properly, it will need to be replaced.

5. Faulty Control Board

The control board is responsible for sending power to the heater element and for controlling the temperature of the water. If the control board is faulty, it may not be able to send power to the element or it may not be able to regulate the temperature properly. This can be caused by a number of things, including:
A damaged control board
A loose connection
A short circuit
To check if the control board is faulty, you can remove it from the pressure washer and test it with a multimeter. If the control board is not functioning properly, it will need to be replaced.

How to Troubleshoot And Fix: north star industrial hot water pressure washer heater not working

Symptoms of a Faulty North Star Industrial Hot Water Pressure Washer Heater

There are a few different symptoms that can indicate that the heater on your North Star industrial hot water pressure washer is not working properly. These include:

The pressure washer is not producing hot water, or the water is not as hot as it should be.
The pressure washer is making a strange noise when the heater is turned on.
The pressure washer is tripping the circuit breaker.
The pressure washer is overheating.

Troubleshooting a Faulty North Star Industrial Hot Water Pressure Washer Heater

If you are experiencing any of the symptoms listed above, it is important to troubleshoot the problem to determine the cause. Here are a few steps to help you troubleshoot the issue:

1. Check the power supply:
Make sure that the pressure washer is plugged in properly and that the power switch is turned on.

2. Check the thermostat:
The thermostat controls the temperature of the water in the pressure washer. If the thermostat is set too low, the water will not get hot enough. To check the thermostat, turn off the pressure washer and unplug it. Then, locate the thermostat and carefully remove the cover. The thermostat is usually a small, round device with a dial on the front. Turn the dial to a higher setting and then plug the pressure washer back in. Turn on the pressure washer and let it run for a few minutes. If the water is still not hot, the thermostat may be faulty and will need to be replaced.3. Check the heating element:
The heating element is what heats the water in the pressure washer. If the heating element is faulty, it will not be able to heat the water properly. To check the heating element, turn off the pressure washer and unplug it. Then, locate the heating element and carefully remove it. The heating element is usually a long, cylindrical device with a metal coil inside. Use a multimeter to check the resistance of the heating element. If the resistance is too high or too low, the heating element will need to be replaced.

4. Check the water pump:
The water pump is what circulates the water through the pressure washer. If the water pump is faulty, it will not be able to circulate the water properly and the heater will not be able to heat the water. To check the water pump, turn off the pressure washer and unplug it. Then, locate the water pump and carefully remove it. The water pump is usually a small, cylindrical device with a motor inside. Use a multimeter to check the resistance of the water pump. If the resistance is too high or too low, the water pump will need to be replaced.

Fixing a Faulty North Star Industrial Hot Water Pressure Washer Heater

Once you have identified the cause of the problem, you can fix the faulty heater. Here are a few tips to help you fix the problem:

If the problem is with the power supply, simply replace the power cord or outlet.
If the problem is with the thermostat, replace the thermostat.
If the problem is with the heating element, replace the heating element.
If the problem is with the water pump, replace the water pump.

Preventing Problems with Your North Star Industrial Hot Water Pressure Washer Heater

You can help prevent problems with your North Star industrial hot water pressure washer heater by following these tips:

Regularly maintain your pressure washer:
This includes cleaning the filter, inspecting the hoses and nozzles, and draining the water from the tank.

Do not overload your pressure washer:
Only use the pressure washer for tasks that are within its capacity.

Do not use the pressure washer in extreme temperatures:
Do not use the pressure washer in temperatures below freezing or above 100 degrees Fahrenheit.

Do not use the pressure washer on delicate surfaces:
Do not use the pressure washer on surfaces that could be damaged by the high pressure water.

By following these tips, you can help prevent problems with your North Star industrial hot water pressure washer heater and keep it running smoothly for years to come.

Also Read: North Star Pressure Washer Chemical Injector Not Working

FAQs: North Star Industrial Hot Water Pressure Washer Heater Not Working

Why is my North Star industrial hot water pressure washer heater not working?

There are a few possible reasons why your North Star industrial hot water pressure washer heater might not be working. Here are some of the most common causes:

The heater is not getting power: Make sure that the heater is plugged in and that the power switch is turned on.

The thermostat is set too low: Check the thermostat and make sure that it is set to a high enough temperature.

The heater is blocked: Make sure that the heater is not blocked by debris or other objects.

The heater is damaged: If the heater is damaged, it will need to be replaced.

How do I troubleshoot a North Star industrial hot water pressure washer heater that is not working?

To troubleshoot a North Star industrial hot water pressure washer heater that is not working, follow these steps:

1. Check the power: Make sure that the heater is plugged in and that the power switch is turned on.
2. Check the thermostat: Check the thermostat and make sure that it is set to a high enough temperature.
3. Check the heater for blockages: Make sure that the heater is not blocked by debris or other objects.
4. Inspect the heater for damage: If the heater is damaged, it will need to be replaced.

How do I replace the heater on my North Star industrial hot water pressure washer?

To replace the heater on your North Star industrial hot water pressure washer, follow these steps:

1. Turn off the power to the heater:
2. Disconnect the water supply to the heater:
3. Remove the old heater:
4. Install the new heater:
5. Reconnect the water supply to the heater:
6. Turn on the power to the heater:

How much does it cost to replace a North Star industrial hot water pressure washer heater?

The cost of replacing a North Star industrial hot water pressure washer heater will vary depending on the model of the heater and the location where you are having it replaced. However, you can expect to pay anywhere from $100 to $200 for a new heater.

How can I prevent my North Star industrial hot water pressure washer heater from breaking down?

To prevent your North Star industrial hot water pressure washer heater from breaking down, follow these tips:

Keep the heater clean: Make sure to clean the heater regularly to prevent debris from building up and causing problems.

Inspect the heater regularly: Inspect the heater regularly for signs of damage or wear and tear.

Replace the heater as needed: If the heater is damaged or worn out, it should be replaced as soon as possible.

By following these tips, you can help to extend the life of your North Star industrial hot water pressure washer heater.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *