Oiler On Chainsaw Not Working: [Reasons + Fixed]

As a chainsaw owner, there are few things more frustrating than having your saw not work properly. One of the most common problems is when the oiler stops working. This can be a major inconvenience, as it can lead to damage to the saw and make it difficult to use.

In this guide, I will walk you through the steps of troubleshooting a chainsaw oiler that is not working. I will cover the most common causes of this problem and provide tips on how to fix it. By following these steps, you can quickly diagnose and resolve the issue, so you can get back to using your saw without any further problems.

Most Common Reasons Of Oiler On Chainsaw Not Working

1. Oiler Hose Kinked or Clogged

The oiler hose on a chainsaw can become kinked or clogged, which will prevent oil from reaching the chain. To check for a kinked hose, look for any bends or kinks in the hose. If you find a kink, straighten it out as best you can. To check for a clogged hose, remove the hose from the chainsaw and look inside. If you see any debris or blockages, clean the hose out with a small brush or wire.

2. Oiler Pump Not Working

The oiler pump on a chainsaw is responsible for pumping oil to the chain. If the pump is not working properly, it will not be able to deliver oil to the chain. To check if the pump is working, start the chainsaw and listen for the pump to engage. You should be able to hear a faint whirring sound coming from the pump. If you do not hear any sound, the pump may be faulty and will need to be replaced.

3. Oil Level Too Low

If the oil level in the chainsaw is too low, the oiler will not be able to deliver oil to the chain. To check the oil level, remove the oil cap and look inside the oil reservoir. The oil level should be between the full and add marks on the reservoir. If the oil level is below the add mark, add more oil to the reservoir.

4. Oil Filter Clogged

The oil filter on a chainsaw helps to clean the oil before it is delivered to the chain. If the oil filter becomes clogged, it will not be able to filter the oil properly and some of the debris will be sent to the chain. This can cause the chain to wear out prematurely. To check the oil filter, remove it from the chainsaw and look inside. If you see any debris or blockages, clean the filter with a small brush or wire.

5. Oil Passages Clogged

The oil passages on a chainsaw carry oil from the oil reservoir to the chain. If the oil passages become clogged, they will not be able to deliver oil to the chain. This can cause the chain to wear out prematurely. To check the oil passages, remove the oil cap and look inside the oil reservoir. You should be able to see the oil passages running from the oil reservoir to the chain. If you see any debris or blockages, clean the passages with a small brush or wire.

How to Troubleshoot: Oiler on Chainsaw Not Working

Symptoms of a Chainsaw Oiler Not Working

There are a few different symptoms that can indicate that the oiler on your chainsaw is not working properly. These include:

The chainsaw is running hot, even when it is not under load.
The chain is smoking or sparking.
The chain is not cutting through wood as well as it used to.
The chain is leaving behind a lot of sawdust.
The chain is getting gummed up with oil.

If you notice any of these symptoms, it is important to troubleshoot the problem and fix it as soon as possible. A malfunctioning oiler can damage your chainsaw and make it dangerous to operate.

How to Troubleshoot a Chainsaw Oiler

To troubleshoot a chainsaw oiler, you will need to:

1. Check the oil level.
2. Check the oil pump.
3. Check the oil line.
4. Check the oil filter.
5. Check the oil cap.

1. Check the oil level.

The first thing you should do is check the oil level in the chainsaw. To do this, remove the oil cap and look inside the oil reservoir. The oil level should be between the full and add marks on the dipstick. If the oil level is low, add more oil to the reservoir.

2. Check the oil pump.

The oil pump is responsible for pumping oil to the chain. To check the oil pump, start the chainsaw and let it run for a few minutes. Then, look at the oil line that runs from the oil pump to the chain. The oil line should be free of kinks or obstructions. If the oil line is blocked, you will need to clean it or replace it.

3. Check the oil line.

The oil line is responsible for transporting oil from the oil pump to the chain. To check the oil line, start the chainsaw and let it run for a few minutes. Then, look at the oil line for leaks. If you see any leaks, you will need to tighten the fittings or replace the oil line.

4. Check the oil filter.

The oil filter is responsible for filtering out dirt and debris from the oil. To check the oil filter, remove the oil filter from the chainsaw. Then, look at the filter for dirt or debris. If the filter is dirty, you will need to clean it or replace it.

5. Check the oil cap.

The oil cap is responsible for keeping the oil in the reservoir. To check the oil cap, make sure that it is tightly sealed. If the oil cap is loose, you will need to tighten it.

How to Fix a Chainsaw Oiler

Once you have troubleshooted the problem, you can fix the chainsaw oiler. The following are some common fixes for a chainsaw oiler that is not working properly:

Add more oil to the reservoir. If the oil level is low, add more oil to the reservoir.
Clean or replace the oil pump. If the oil pump is blocked, you will need to clean it or replace it.
Clean or replace the oil line. If the oil line is leaking, you will need to tighten the fittings or replace the oil line.
Clean or replace the oil filter. If the oil filter is dirty, you will need to clean it or replace it.
Tighten the oil cap. If the oil cap is loose, you will need to tighten it.

By following these steps, you can troubleshoot and fix a chainsaw oiler that is not working properly.

Preventing Chainsaw Oiler Problems

The best way to prevent chainsaw oiler problems is to maintain your chainsaw regularly. This includes:

Checking the oil level regularly.
Cleaning the oil pump regularly.
Cleaning the oil line regularly.
Cleaning the oil filter regularly.
Tightening the oil cap regularly.

By following these simple steps, you can help to keep your chainsaw oiler running smoothly and prevent problems down the road.

Also Check: Play Day Chainsaw Bubble Maker Not Working

FAQs About Oiler on Chainsaw Not Working

Why is the oiler on my chainsaw not working?

There are a few possible reasons why the oiler on your chainsaw may not be working.

The oiler may be clogged. If the oiler is clogged, it will not be able to pump oil to the chain. This can be caused by dirt or debris getting into the oiler, or by the oil itself becoming thick and sticky.
The oiler may be empty. If the oiler is empty, it will not be able to pump oil to the chain. This can be caused by not adding oil to the chainsaw regularly, or by the oil leaking out of the chainsaw.
The oiler may be damaged. If the oiler is damaged, it will not be able to pump oil to the chain. This can be caused by dropping the chainsaw, or by hitting the oiler with something hard.

How can I fix the oiler on my chainsaw?

If the oiler on your chainsaw is not working, you can try the following steps to fix it:

Check the oiler for clogs. Remove the oiler cap and look inside the oiler. If you see any dirt or debris, use a small brush to clean it out.
Check the oil level. Make sure that the oil level in the oiler is at least halfway full. If the oil level is low, add more oil to the chainsaw.
Check the oiler for damage. Look for any cracks or damage to the oiler. If the oiler is damaged, you will need to replace it.

What can I do to prevent the oiler on my chainsaw from not working?

There are a few things you can do to prevent the oiler on your chainsaw from not working:

Keep the oiler clean. Make sure to clean the oiler regularly to prevent dirt and debris from clogging it.
Keep the oil level full. Make sure to keep the oil level in the oiler at least halfway full. This will help to ensure that the oiler is able to pump oil to the chain.
Use the right type of oil. Use the type of oil that is recommended for your chainsaw. This will help to prevent the oil from becoming thick and sticky, which can clog the oiler.

What happens if the oiler on my chainsaw is not working?

If the oiler on your chainsaw is not working, it can cause the chain to become dry and overheat. This can damage the chain and make it more likely to break. Additionally, a dry chain is more likely to kick back, which can be dangerous.

How often should I oil my chainsaw chain?

The frequency with which you should oil your chainsaw chain depends on the type of chainsaw you have and the conditions in which you are using it. However, as a general rule, you should oil your chainsaw chain every time you use it.

Here are some tips for oiling your chainsaw chain:

Use the type of oil that is recommended for your chainsaw.
Apply the oil to the chain while the chainsaw is running.
Apply the oil to the top of the chain, as well as the sides.
Make sure to wipe off any excess oil.