Poulan Chainsaw Bar Oiler Not Working: [Causes & Proven Fixes]

As a chainsaw repair professional, I have seen firsthand the frustration and inconvenience that can be caused by a . A malfunctioning bar oiler can quickly lead to a dull chain, which can be dangerous and inefficient. In addition, a chainsaw that is not properly lubricated can damage the bar and chain, leading to costly repairs.

This guide will help you troubleshoot a Poulan chainsaw bar oiler that is not working. By following the steps in this guide, you can quickly diagnose and resolve the problem, restoring your chainsaw to full functionality.

Most Common Reasons Of Poulan Chainsaw Bar Oiler Not Working

Most Common Reasons Of Poulan Chainsaw Bar Oiler Not Working

1. Insufficient Oil

The most common reason for a Poulan chainsaw bar oiler not working is insufficient oil. This can be caused by a number of factors, including:

The oil reservoir is empty or low.
The oil line is clogged or kinked.
The oil pump is not working properly.

To fix this problem, you will need to:

Check the oil reservoir and fill it up if necessary.
Inspect the oil line for clogs or kinks and clear them if necessary.
Test the oil pump to make sure it is working properly.

2. Oil Pump Problems

Another common reason for a Poulan chainsaw bar oiler not working is a problem with the oil pump. This can be caused by a number of factors, including:

The oil pump is worn out or damaged.
The oil pump is not getting enough power from the engine.
The oil pump is not aligned properly with the bar.

To fix this problem, you will need to:

Replace the oil pump if it is worn out or damaged.
Make sure the oil pump is getting enough power from the engine.
Align the oil pump with the bar.

3. Clogged Oiler Port

A clogged oiler port can also prevent the oil from reaching the bar. This can be caused by:

Sawdust or debris clogging the port.
The oiler port being worn out or damaged.

To fix this problem, you will need to:

Clean the oiler port to remove any debris.
Replace the oiler port if it is worn out or damaged.

4. Misaligned Bar Oiler

If the bar oiler is not aligned properly with the bar, it will not be able to properly lubricate the bar. This can be caused by:

The bar oiler being installed incorrectly.
The bar oiler being knocked out of alignment.

To fix this problem, you will need to:

Reinstall the bar oiler correctly.
Align the bar oiler with the bar.

How to Troubleshoot: Poulan Chainsaw Bar Oiler Not Working

Symptoms of a Poulan Chainsaw Bar Oiler Not Working

There are a few symptoms that can indicate that the bar oiler on your Poulan chainsaw is not working properly. These include:

The chain is not being lubricated properly, which can lead to overheating and damage to the chain and bar.
The bar oil reservoir is empty or nearly empty.
The oiler is not pumping oil to the bar.
The oiler is leaking oil.

How to Troubleshoot a Poulan Chainsaw Bar Oiler

If you suspect that the bar oiler on your Poulan chainsaw is not working properly, you can troubleshoot the problem by following these steps:

1. Check the oil level. The first thing you should do is check the oil level in the reservoir. If the reservoir is empty or nearly empty, fill it up with fresh oil.
2. Check the oil pump. The oil pump is responsible for pumping oil to the bar. To check the oil pump, start the chainsaw and let it run for a few minutes. While the chainsaw is running, look at the oiler. If the oiler is not pumping oil to the bar, you will need to replace the oil pump.
3. Check the oil line. The oil line is the hose that connects the oil pump to the bar. To check the oil line, look for any leaks. If you find a leak, you will need to replace the oil line.
4. Check the bar oiler orifice. The bar oiler orifice is the small hole in the bar that allows oil to flow to the chain. To check the bar oiler orifice, clean it with a small brush. If the orifice is clogged, you will need to clean it or replace it.

Troubleshooting Tips

Here are a few troubleshooting tips that can help you fix a Poulan chainsaw bar oiler that is not working properly:

If you are not sure how to troubleshoot the bar oiler, take your chainsaw to a qualified service center.
Make sure that you are using the correct type of oil for your chainsaw.
Keep the oil reservoir full.
Clean the oiler regularly.
Inspect the oil line for leaks.
Clean the bar oiler orifice.

Conclusion

By following these steps, you can troubleshoot a Poulan chainsaw bar oiler that is not working properly. If you are not comfortable troubleshooting the bar oiler yourself, take your chainsaw to a qualified service center.

Also Check: Poulan Chainsaw Brake Not Working

FAQs: Poulan Chainsaw Bar Oiler Not Working

Why is my Poulan chainsaw bar oiler not working?

There are a few possible reasons why your Poulan chainsaw bar oiler may not be working. Here are some of the most common causes:

The oiler is not plugged in. Make sure that the oiler is plugged into an outlet and that the outlet is working properly.
The oiler is not turned on. Check the oiler’s switch to make sure that it is turned on.
The oiler’s reservoir is empty. Check the oiler’s reservoir to make sure that it is full of oil.
The oiler’s hose is clogged. The oiler’s hose may be clogged with sawdust or other debris, which can prevent oil from flowing to the bar.
The oiler’s pump is broken. The oiler’s pump may be broken, which can prevent it from pumping oil to the bar.

How do I fix my Poulan chainsaw bar oiler?

To fix your Poulan chainsaw bar oiler, you will need to identify the cause of the problem and then take the appropriate steps to fix it. Here are some troubleshooting tips:

Check the oiler’s connection to the chainsaw. Make sure that the oiler is plugged into the chainsaw and that the connection is secure.
Check the oiler’s switch. Make sure that the oiler’s switch is turned on.
Check the oiler’s reservoir. Make sure that the oiler’s reservoir is full of oil.
Check the oiler’s hose. Remove the oiler’s hose from the bar and check for any clogs. If you find a clog, clean it out with a small brush or needle.
Check the oiler’s pump. If the oiler’s pump is broken, you will need to replace it.

What can I do to prevent my Poulan chainsaw bar oiler from breaking?

There are a few things you can do to prevent your Poulan chainsaw bar oiler from breaking. Here are some tips:

Keep the oiler clean. Make sure to clean the oiler regularly to prevent it from becoming clogged.
Don’t overfill the oiler. Overfilling the oiler can cause the oil to leak out and damage the chainsaw.
Don’t use the chainsaw in extreme temperatures. Extreme temperatures can damage the oiler and cause it to break.
Don’t drop the chainsaw. Dropping the chainsaw can damage the oiler and cause it to break.

What are the symptoms of a Poulan chainsaw bar oiler that is not working properly?

There are a few symptoms that may indicate that your Poulan chainsaw bar oiler is not working properly. Here are some of the most common symptoms:

The bar is not being lubricated properly.
The bar is getting hot.
The chain is skipping.
The chain is getting dull quickly.
The chain is breaking.

What are the dangers of using a Poulan chainsaw with a bar oiler that is not working properly?

There are a few dangers associated with using a Poulan chainsaw with a bar oiler that is not working properly. Here are some of the most serious dangers:

The chain can become hot and damage the chainsaw.
The chain can skip and cause injury.
The chain can break and cause injury.
The chainsaw can start a fire.

 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *