Poulan Chainsaw Brake Not Working: [Proven Fixes!]

Chainsaw repair can be a challenging task
especially when dealing with a common issue such as a malfunctioning Poulan chainsaw brake. This problem can be frustrating for chainsaw owners as it not only hinders the tool’s functionality but also poses safety concerns. A non-working chainsaw brake can lead to potential hazards during operation
making it crucial to swiftly diagnose and resolve the issue. Understanding the significance of a fully operational chainsaw brake
we have created this troubleshooting guide to assist you in identifying and addressing the root cause of this problem. By following the steps outlined in this guide
you can effectively restore the functionality of your Poulan chainsaw
ensuring both operational efficiency and safety.

Most Common Reasons Of Poulan Chainsaw Brake Not Working

Poulan Chainsaw Brake Not Working

Maladjusted brake. The brake may not be adjusted properly, so it is not engaging when the chainsaw is under load.
Dirty brake. The brake may be dirty, so it is not able to engage properly.
Damaged brake. The brake may be damaged, so it is not able to engage at all.
Faulty brake switch. The brake switch may be faulty, so it is not sending the signal to the brake to engage.
Corroded brake cable. The brake cable may be corroded, so it is not able to move the brake lever properly.
Incorrect brake fluid. The brake fluid may be incorrect, so it is not able to lubricate the brake properly.
Low brake fluid level. The brake fluid level may be low, so the brake is not able to engage properly.

How to Troubleshoot: Poulan Chainsaw Brake Not Working

Symptoms of a Poulan Chainsaw Brake Not Working

There are a few symptoms that you can look for to determine if the brake on your Poulan chainsaw is not working properly. These include:

The chain does not stop when you release the trigger
The chain continues to move even when the chainsaw is turned off
The brake lever is difficult to engage or disengage
The brake is making a grinding or squealing noise

Causes of a Poulan Chainsaw Brake Not Working

There are a few different things that can cause the brake on your Poulan chainsaw to stop working properly. These include:

Dirty or worn brake pads: The brake pads on your chainsaw can become dirty or worn over time, which can cause them to lose their ability to stop the chain.
Damaged brake shoes: The brake shoes on your chainsaw can also become damaged, which can prevent them from making contact with the chain and stopping it.
Incorrectly adjusted brake: The brake on your chainsaw may also be incorrectly adjusted, which can prevent it from working properly.
Faulty brake assembly: The brake assembly on your chainsaw may be faulty, which can prevent it from stopping the chain.

How to Troubleshoot a Poulan Chainsaw Brake Not Working

To troubleshoot a Poulan chainsaw brake that is not working properly, you will need to:

1. Inspect the brake pads and shoes. Check to see if the brake pads and shoes are dirty or worn. If they are, clean them or replace them as needed.
2. Inspect the brake assembly. Check to see if the brake assembly is damaged. If it is, replace it as needed.
3. Adjust the brake. Check to see if the brake is correctly adjusted. If it is not, adjust it as needed.
4. Test the brake. Once you have made the necessary repairs or adjustments, test the brake to make sure that it is working properly.

How to Prevent a Poulan Chainsaw Brake from Failing

There are a few things that you can do to prevent your Poulan chainsaw brake from failing:

Keep the brake pads and shoes clean. Clean the brake pads and shoes regularly to prevent them from becoming dirty or worn.
Inspect the brake assembly regularly. Inspect the brake assembly regularly for signs of damage.
Adjust the brake regularly. Adjust the brake regularly to make sure that it is correctly adjusted.
Use the brake properly. Use the brake properly to avoid putting unnecessary wear and tear on it.

By following these tips, you can help to keep your Poulan chainsaw brake working properly for years to come.

Also Check: Poulan Chainsaw Oil Pump Not Working

FAQs: Poulan Chainsaw Brake Not Working

Why is my Poulan chainsaw brake not working?

There are a few possible reasons why your Poulan chainsaw brake may not be working.

The brake spring is broken or worn out. The brake spring is what applies pressure to the brake pads and stops the chain from moving. If the spring is broken or worn out, it will not be able to apply enough pressure to the brake pads and the chain will not stop.
The brake pads are worn out. The brake pads are what make contact with the chain and stop it from moving. If the brake pads are worn out, they will not be able to grip the chain and stop it.
The brake lever is not adjusted correctly. The brake lever controls the amount of pressure that is applied to the brake pads. If the brake lever is not adjusted correctly, it may not be applying enough pressure to the brake pads and the chain will not stop.
The brake is contaminated with dirt or debris. Dirt or debris can build up on the brake pads and prevent them from gripping the chain. If the brake is contaminated, it will need to be cleaned before it will work properly.

How do I fix my Poulan chainsaw brake?

To fix your Poulan chainsaw brake, you will need to identify the cause of the problem and then take the appropriate steps to fix it.

If the brake spring is broken or worn out, you will need to replace it. You can purchase a replacement brake spring from your local Poulan dealer or online.
If the brake pads are worn out, you will need to replace them. You can purchase a replacement set of brake pads from your local Poulan dealer or online.
If the brake lever is not adjusted correctly, you will need to adjust it. The brake lever should be adjusted so that it is just tight enough to apply pressure to the brake pads.
If the brake is contaminated with dirt or debris, you will need to clean it. You can clean the brake by using a soft cloth and some rubbing alcohol.

How can I prevent my Poulan chainsaw brake from failing?

There are a few things you can do to prevent your Poulan chainsaw brake from failing.

Inspect the brake regularly for signs of wear and tear. Check the brake spring for cracks or breaks, and check the brake pads for wear. If you see any signs of wear or tear, replace the parts as needed.
Adjust the brake lever so that it is just tight enough to apply pressure to the brake pads. If the brake lever is too loose, it will not be able to apply enough pressure to the brake pads and the chain may not stop.
Keep the brake clean. Dirt and debris can build up on the brake pads and prevent them from gripping the chain. Clean the brake regularly with a soft cloth and some rubbing alcohol.

What should I do if my Poulan chainsaw brake fails while I’m using it?

If your Poulan chainsaw brake fails while you’re using it, you should immediately stop using the chainsaw and turn it off. Then, you should follow these steps:

1. Disconnect the spark plug wire. This will prevent the chainsaw from starting up accidentally.
2. Remove the chainsaw chain. This will prevent the chain from causing any injuries.
3. Inspect the brake for signs of damage. Look for cracks or breaks in the brake spring, wear on the brake pads, or contamination on the brake.
4. Replace any damaged parts. If any parts are damaged, you will need to replace them before you can use the chainsaw again.
5. Re-adjust the brake lever. Make sure the brake lever is adjusted so that it is just tight enough to apply pressure to the brake pads.
6. Test the brake. Start the chainsaw and apply the brake. The chain should stop moving when you apply the brake.

Where can I get more information about Poulan chainsaw brakes?

For more information about Poulan chainsaw brakes, you can contact your local Poulan dealer or visit the Poulan website.

 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *