Poulan Chainsaw Oil Pump Not Working: [Causes & Proven Solutions]

A Poulan chainsaw is a powerful and versatile tool that can be used for a variety of tasks, from cutting firewood to clearing brush. However, one common problem that can occur with Poulan chainsaws is a malfunctioning oil pump. This can be a frustrating and inconvenient issue, as it can prevent the chainsaw from operating properly.

In this guide, we will discuss the common causes of a , and we will provide step-by-step instructions on how to troubleshoot and repair the problem. By following these instructions, you can quickly and easily diagnose and resolve the issue, and get your chainsaw back up and running in no time.

Most Common Reasons Of Poulan Chainsaw Oil Pump Not Working

Most Common Reasons Of Poulan Chainsaw Oil Pump Not Working

1. Oil Pump Hose Is Clogged

The oil pump hose can become clogged with sawdust and other debris, preventing oil from reaching the chain. To fix this problem, remove the oil pump hose from the chainsaw and clean it with a brush or compressed air.

2. Oil Pump O-Ring Is Damaged

The O-ring on the oil pump can become damaged, causing oil to leak out and preventing it from reaching the chain. To fix this problem, replace the O-ring.

3. Oil Pump Is Not Installed Correctly

The oil pump must be installed correctly in order for it to work properly. If the oil pump is not installed correctly, it may not be able to pump oil to the chain. To fix this problem, remove the oil pump and reinstall it correctly.

4. Oil Pump Is Damaged

The oil pump can be damaged if it is subjected to excessive heat or pressure. If the oil pump is damaged, it will not be able to pump oil to the chain. To fix this problem, replace the oil pump.

How to Troubleshoot: Poulan Chainsaw Oil Pump Not Working

Symptoms of a Poulan Chainsaw Oil Pump Not Working

There are a few symptoms that you can look for to determine if your Poulan chainsaw oil pump is not working properly. These include:

The chainsaw is smoking or making a burning smell.
The chain is not getting lubricated properly.
The chain is getting hot.
The chainsaw is making a loud noise.

Causes of a Poulan Chainsaw Oil Pump Not Working

There are a few different things that can cause a Poulan chainsaw oil pump to stop working properly. These include:

A clogged oil filter.
A dirty oil tank.
A faulty oil pump.
A bad oil line.

How to Troubleshoot a Poulan Chainsaw Oil Pump

To troubleshoot a Poulan chainsaw oil pump, you will need to:

1. Check the oil filter.
2. Check the oil tank.
3. Check the oil pump.
4. Check the oil line.

Step 1: Check the oil filter

The first thing you should do is check the oil filter to see if it is clogged. To do this, remove the oil filter from the chainsaw and inspect it for any signs of debris or blockages. If the oil filter is clogged, you will need to replace it with a new one.

Step 2: Check the oil tank

The next thing you should do is check the oil tank to see if it is dirty. To do this, remove the oil tank from the chainsaw and inspect it for any signs of dirt or debris. If the oil tank is dirty, you will need to clean it out.

Step 3: Check the oil pump

The next thing you should do is check the oil pump to see if it is faulty. To do this, you will need to remove the oil pump from the chainsaw and inspect it for any signs of damage or wear. If the oil pump is faulty, you will need to replace it with a new one.

Step 4: Check the oil line

The final thing you should do is check the oil line to see if it is damaged. To do this, you will need to inspect the oil line for any signs of cracks or leaks. If the oil line is damaged, you will need to replace it with a new one.

How to Fix a Poulan Chainsaw Oil Pump

Once you have identified the cause of the problem, you can fix the Poulan chainsaw oil pump by following these steps:

If the oil filter is clogged, replace it with a new one.
If the oil tank is dirty, clean it out.
If the oil pump is faulty, replace it with a new one.
If the oil line is damaged, replace it with a new one.

Preventing Poulan Chainsaw Oil Pump Problems

You can prevent Poulan chainsaw oil pump problems by following these tips:

Change the oil filter regularly.
Keep the oil tank clean.
Inspect the oil pump regularly for signs of damage or wear.
Replace the oil line if it is damaged.

By following these tips, you can help to keep your Poulan chainsaw oil pump working properly and avoid costly repairs.

Also Check: Poulan Chainsaw Primer Bulb Not Working

FAQs: Poulan Chainsaw Oil Pump Not Working

Why is my Poulan chainsaw oil pump not working?

There are a few possible reasons why your Poulan chainsaw oil pump may not be working.

The oil pump may be clogged. If the oil pump is clogged, it will not be able to pump oil to the chainsaw chain. This can be caused by dirt or debris getting into the pump, or by the oil filter becoming clogged.
The oil pump may be damaged. If the oil pump is damaged, it will not be able to pump oil to the chainsaw chain. This can be caused by a number of things, such as a broken impeller, a worn-out gasket, or a cracked housing.
The oil pump may not be getting enough power. If the oil pump is not getting enough power, it will not be able to pump oil to the chainsaw chain. This can be caused by a loose or damaged wire, a bad connection at the battery, or a problem with the chainsaw’s electrical system.

How do I fix a Poulan chainsaw oil pump that is not working?

To fix a Poulan chainsaw oil pump that is not working, you will need to first identify the problem. If the oil pump is clogged, you can clean it by removing the oil filter and cleaning the inside of the pump with a small brush. If the oil pump is damaged, you will need to replace it. If the oil pump is not getting enough power, you will need to troubleshoot the electrical system to find and fix the problem.

What are the symptoms of a Poulan chainsaw oil pump that is not working?

There are a few symptoms that may indicate that your Poulan chainsaw oil pump is not working.

The chainsaw chain is not getting lubricated. This can be seen by the chain becoming hot and smoking.
The chainsaw chain is skipping or jumping. This can be caused by the chain being too dry and not getting enough lubrication.
The chainsaw chain is wearing out quickly. This can be caused by the chain being too dry and not getting enough lubrication.

How can I prevent my Poulan chainsaw oil pump from failing?

There are a few things you can do to prevent your Poulan chainsaw oil pump from failing.

Keep the oil pump clean. Make sure to clean the oil pump regularly to prevent dirt and debris from clogging it.
Replace the oil filter regularly. The oil filter helps to keep the oil pump clean. Make sure to replace the oil filter according to the manufacturer’s recommendations.
Use the correct oil. Use the correct oil for your chainsaw. The wrong oil can damage the oil pump.
Maintain the chainsaw properly. Make sure to maintain the chainsaw properly by following the manufacturer’s recommendations. This includes things like sharpening the chain, adjusting the tension, and cleaning the air filter.

Where can I get help if my Poulan chainsaw oil pump is not working?

If you are having trouble with your Poulan chainsaw oil pump, you can get help from a number of sources.

The Poulan website. The Poulan website has a number of resources that can help you troubleshoot and fix your chainsaw.
The Poulan customer service department. The Poulan customer service department can help you troubleshoot and fix your chainsaw.
A Poulan dealer. A Poulan dealer can help you troubleshoot and fix your chainsaw.

 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *