Poulan Chainsaw Oiler Not Working: [Easy Troubleshooting]

A Poulan chainsaw that is not properly oiled can quickly become a hazard. A dull chain can cause the saw to bind up and kickback, which can result in serious injury. In addition, a dry chain is more likely to overheat and damage the saw.

If your Poulan chainsaw oiler is not working, it is important to troubleshoot the problem and resolve it as quickly as possible. This guide will help you identify the cause of the problem and take steps to fix it.

By following the steps in this guide, you can quickly restore your Poulan chainsaw to working order and avoid the potential hazards of a malfunctioning saw.

Most Common Reasons Why Poulan Chainsaw Oiler Not Working

1. Oiler Hose is Clogged

The oiler hose can become clogged with sawdust or other debris, preventing oil from reaching the chain. To fix this, remove the oiler hose from the chainsaw and clean it with a wire brush.

2. Oiler Pump is Damaged

The oiler pump can be damaged if it is run dry or if it is subjected to too much pressure. If the pump is damaged, it will not be able to pump oil to the chain. To fix this, replace the oiler pump.

3. Oiler Level is Low

If the oiler level is low, the oiler will not be able to pump enough oil to the chain. To fix this, add oil to the oiler reservoir until the level is full.

4. Oiler is Not Aligned Properly

The oiler can become misaligned if the chainsaw is dropped or if the chain is replaced. If the oiler is not aligned properly, it will not be able to pump oil to the chain. To fix this, align the oiler according to the manufacturer’s instructions.

5. Oiler Switch is Off

The oiler switch can be turned off accidentally. If the oiler switch is off, the oiler will not be able to pump oil to the chain. To fix this, turn the oiler switch on.

How to Troubleshoot: Poulan Chainsaw Oiler Not Working

Symptoms of a Poulan Chainsaw Oiler Not Working

There are a few different symptoms that can indicate that your Poulan chainsaw oiler is not working properly. These include:

The chainsaw is running hot, even when it is not under load.
The chainsaw is smoking or emitting white or blue smoke.
The chainsaw’s chain is getting excessively hot.
The chainsaw’s chain is not being lubricated properly.
The chainsaw’s bar is becoming excessively worn.

If you are experiencing any of these symptoms, it is important to troubleshoot the problem and fix it as soon as possible. A Poulan chainsaw that is not properly lubricated can quickly become damaged, and it can also be dangerous to operate.

How to Troubleshoot a Poulan Chainsaw Oiler

To troubleshoot a Poulan chainsaw oiler, you will need to follow these steps:

1. Check the oil level. The first thing you should do is check the oil level in the chainsaw’s reservoir. If the oil level is low, add more oil to the reservoir.
2. Check the oil pump. The oil pump is responsible for sending oil to the chainsaw’s chain. To check the oil pump, start the chainsaw and let it run for a few minutes. Then, look at the oil port on the side of the chainsaw. If oil is not coming out of the oil port, the oil pump is not working properly.
3. Check the oil line. The oil line connects the oil pump to the chainsaw’s chain. To check the oil line, look for any kinks or blockages. If you find a kink or blockage, straighten out the line or remove the blockage.
4. Check the oil filter. The oil filter helps to keep dirt and debris out of the oil pump. To check the oil filter, remove the filter and inspect it for damage. If the filter is damaged, replace it with a new one.
5. Check the oil reservoir cap. The oil reservoir cap has a small hole in it that allows air to enter the reservoir. If this hole is clogged, it can prevent oil from flowing into the reservoir. To check the oil reservoir cap, remove the cap and clean out the hole.

If you have checked all of these things and the oiler is still not working, you may need to take the chainsaw to a qualified service center for repairs.

Preventing Poulan Chainsaw Oiler Problems

The best way to prevent Poulan chainsaw oiler problems is to keep the chainsaw properly maintained. This includes:

Checking the oil level regularly and adding more oil as needed.
Cleaning the oil pump and oil line regularly.
Replacing the oil filter regularly.
Cleaning the oil reservoir cap regularly.

By following these simple tips, you can help to keep your Poulan chainsaw oiler working properly and extend the life of your chainsaw.

FAQs: Poulan Chainsaw Oiler Not Working

Why is my Poulan chainsaw oiler not working?

There are a few possible reasons why your Poulan chainsaw oiler may not be working. Here are some of the most common causes:

The oiler is not getting enough oil. This can happen if the oil level in the reservoir is low, or if the oil line is clogged.
The oiler is not getting enough air. This can happen if the air filter is clogged, or if the carburetor is not adjusted properly.
The oiler is not working properly. This can happen if the oiler is damaged, or if the oiler spring is broken.

How do I fix my Poulan chainsaw oiler?

To fix your Poulan chainsaw oiler, you will need to identify the cause of the problem. Once you have identified the cause, you can follow the steps below to fix the problem:

Check the oil level in the reservoir. If the oil level is low, add oil to the reservoir until it reaches the full mark.
Check the oil line for clogs. If the oil line is clogged, you can try to clear the clog by using a thin wire or a needle.
Clean the air filter. If the air filter is clogged, you can clean it by following the instructions in your chainsaw’s owner’s manual.
Adjust the carburetor. If the carburetor is not adjusted properly, you can adjust it by following the instructions in your chainsaw’s owner’s manual.
Replace the oiler. If the oiler is damaged or the oiler spring is broken, you will need to replace the oiler.

What can I do to prevent my Poulan chainsaw oiler from not working?

There are a few things you can do to prevent your Poulan chainsaw oiler from not working. Here are some tips:

Keep the oil level in the reservoir full. This will help to ensure that the oiler has enough oil to work properly.
Clean the air filter regularly. A clogged air filter can restrict the airflow to the carburetor, which can cause the oiler to not work properly.
Adjust the carburetor regularly. A carburetor that is not adjusted properly can cause the oiler to not work properly.
Replace the oiler regularly. The oiler is a wear item, and it will eventually need to be replaced.

What happens if my Poulan chainsaw oiler is not working?

If your Poulan chainsaw oiler is not working, it can cause the following problems:

The chainsaw can overheat. This can damage the engine and shorten its lifespan.
The chainsaw can seize up. This can make it difficult to start the chainsaw and can damage the engine.
The chainsaw can be dangerous to use. A chainsaw that is not properly lubricated can be more likely to kick back, which can cause serious injuries.

How can I get help with my Poulan chainsaw oiler?

If you are having trouble with your Poulan chainsaw oiler, you can get help from the following sources:

The Poulan chainsaw owner’s manual. The owner’s manual contains information on how to maintain and troubleshoot your chainsaw.
The Poulan chainsaw website. The Poulan chainsaw website contains a wealth of information on how to use and maintain your chainsaw.
The Poulan chainsaw customer service department. The customer service department can help you troubleshoot your chainsaw and can provide you with replacement parts.

Also Read: Bosch Toy Chainsaw Not Working