Power Pressure Washer Electric Not Working [Causes & Proven Solutions]
Your power pressure washer is one of the most valuable tools in your home improvement arsenal. It can clean just about anything, from your driveway to your siding to your car. But when your pressure washer isn’t working, it can be a major inconvenience.
If your power pressure washer isn’t working, don’t panic. In most cases, the problem is easy to fix. In this guide, I’ll walk you through the steps to troubleshoot a power pressure washer that isn’t working. By the end of this guide, you’ll be back to cleaning your home with ease.
Reasons Why Power Pressure Washer Electric Not Working
No Power
The power cord is not plugged in or is not plugged in all the way.
The power switch is turned off.
The pressure washer’s circuit breaker has tripped.
The pressure washer’s thermal fuse has blown.
The pressure washer’s motor is burned out.
Low Pressure
The water supply is turned off or is not turned on all the way.
The water hose is kinked or clogged.
The pressure washer’s water filter is dirty.
The pressure washer’s pump is damaged.
Nozzle Problems
The nozzle is clogged.
The nozzle is not the correct type for the job.
The nozzle is not properly installed.
Other Problems
The pressure washer is leaking.
The pressure washer is making strange noises.
The pressure washer is smoking.
How to Troubleshoot And Fix: power pressure washer electric not working
Symptoms of a Power Pressure Washer Not Working
There are a few different symptoms that can indicate that your power pressure washer is not working properly. These include:
The pressure washer won’t start
The pressure washer starts but doesn’t build pressure
The pressure washer builds pressure but doesn’t spray water
The pressure washer sprays water but not with enough pressure
The pressure washer leaks water
Troubleshooting a Power Pressure Washer That’s Not Working
If your power pressure washer is not working, there are a few things you can check to troubleshoot the problem.
1. Check the power cord:
Make sure that the power cord is plugged into an outlet and that the outlet is working properly. You can test the outlet by plugging in another appliance.
2. Check the circuit breaker:
If the power cord is plugged in and the outlet is working, check the circuit breaker to make sure that it is not tripped. To reset the circuit breaker, flip it to the Off position and then flip it back to the On position.
3. Check the oil level:
If your pressure washer is gas-powered, check the oil level to make sure that it is not low. To check the oil level, remove the oil dipstick and wipe it clean. Then, reinsert the dipstick and pull it out again. The oil level should be between the Full and Add marks on the dipstick.
4. Check the spark plugs:
If your pressure washer is gas-powered, check the spark plugs to make sure that they are not fouled or damaged. To check the spark plugs, remove the spark plug wires from the spark plugs. Then, use a spark plug wrench to remove the spark plugs. Inspect the spark plugs for signs of wear and tear. If the spark plugs are fouled or damaged, replace them with new spark plugs.
5. Check the fuel filter:
If your pressure washer is gas-powered, check the fuel filter to make sure that it is not clogged. To check the fuel filter, remove the fuel line from the fuel filter. Then, use a flashlight to inspect the fuel filter. If the fuel filter is clogged, replace it with a new fuel filter.
6. Check the water pump:
If your pressure washer is electric, check the water pump to make sure that it is working properly. To check the water pump, remove the water inlet hose from the water pump. Then, turn on the pressure washer and listen for the water pump to start. If you do not hear the water pump start, the water pump may be defective.
7. Check the pressure switch:
If your pressure washer is electric, check the pressure switch to make sure that it is working properly. To check the pressure switch, turn on the pressure washer and listen for the pressure switch to click. If you do not hear the pressure switch click, the pressure switch may be defective.
8. Check the hoses and fittings:
Check the hoses and fittings to make sure that they are not damaged or leaking. If the hoses or fittings are damaged or leaking, replace them with new hoses and fittings.
9. Clean the pressure washer:
If your pressure washer is not working properly, it may be because it is dirty. Clean the pressure washer by spraying it with a garden hose. You can also use a pressure washer cleaner to clean the pressure washer.
How to Fix a Power Pressure Washer That’s Not Working
Once you have troubleshooted the problem, you can fix the problem with your power pressure washer.
1. Fix the power cord:
If the power cord is damaged, replace it with a new power cord.
2. Reset the circuit breaker:
If the circuit breaker is tripped, flip it to the Off position and then flip it back to the On position.
3. Add oil to the oil reservoir:
If the oil level is low, add oil to the oil reservoir until the oil level is between the Full and Add marks on the dipstick.
4. Replace the spark plugs:
If the spark plugs are fouled or damaged, replace them with new spark plugs.
5. Clean the fuel filter:
If the fuel filter is clogged, clean the fuel filter with a clean rag.
6. Replace the water pump:
If the water pump is defective, replace it with a new water pump.
7. Replace the pressure switch:
If the pressure switch is defective,
Also Read: Powerhorse Pressure Washer Thermal Relief Valve Not Working
FAQs: Power Pressure Washer Electric Not Working
Why is my power pressure washer electric not working?
There are a few possible reasons why your power pressure washer electric may not be working. Here are some of the most common causes:
The power cord is not plugged in properly: Make sure that the power cord is plugged into an outlet that is turned on and that the plug is fully inserted into the outlet.
The pressure washer is not getting enough water: Check the water supply to make sure that it is turned on and that the water pressure is sufficient.
The pressure washer pump is not working properly: If the pump is not working, you may hear a humming noise but no water will come out of the nozzle. You may need to replace the pump or have it repaired.
The pressure washer hose is kinked or damaged: If the hose is kinked or damaged, it will prevent water from flowing properly to the nozzle. Check the hose for kinks or damage and replace it if necessary.
The nozzle is clogged: If the nozzle is clogged, it will prevent water from flowing out of the nozzle. Try cleaning the nozzle with a wire brush or needle to remove any debris.
What can I do if my power pressure washer electric is not working?
If your power pressure washer electric is not working, here are some troubleshooting steps that you can try:
1. Check the power cord: Make sure that the power cord is plugged into an outlet that is turned on and that the plug is fully inserted into the outlet.
2. Check the water supply: Make sure that the water supply to the pressure washer is turned on and that the water pressure is sufficient.
3. Check the pressure washer pump: If the pump is not working, you may hear a humming noise but no water will come out of the nozzle. You may need to replace the pump or have it repaired.
4. Check the pressure washer hose: If the hose is kinked or damaged, it will prevent water from flowing properly to the nozzle. Check the hose for kinks or damage and replace it if necessary.
5. Check the nozzle: If the nozzle is clogged, it will prevent water from flowing out of the nozzle. Try cleaning the nozzle with a wire brush or needle to remove any debris.
If you have tried these troubleshooting steps and your power pressure washer electric is still not working, you may need to contact a qualified technician for assistance.
How do I prevent my power pressure washer electric from not working?
There are a few things that you can do to prevent your power pressure washer electric from not working:
Always unplug the power pressure washer electric when you are not using it: This will help to prevent the pump from overheating and wearing out prematurely.
Do not use the pressure washer electric on wet surfaces: This can cause the electrical components to short out and malfunction.
Do not use the pressure washer electric to clean flammable materials: This can cause a fire hazard.
Do not store the pressure washer electric in a damp or humid environment: This can cause the electrical components to corrode and malfunction.
Regularly clean the pressure washer electric to prevent dirt and debris from clogging the pump and hose:
By following these tips, you can help to prevent your power pressure washer electric from not working.
What is the difference between a gas pressure washer and an electric pressure washer?
Gas pressure washers and electric pressure washers are both used to clean surfaces with high-pressure water. However, there are some key differences between the two types of pressure washers.
Power: Gas pressure washers are typically more powerful than electric pressure washers. This is because gas pressure washers use gasoline to power the engine, which provides more power than the electric motor used in electric pressure washers.
Mobility: Gas pressure washers are typically more mobile than electric pressure washers. This is because gas pressure washers do not require an electrical outlet to operate, so they can be used anywhere there is a gas supply.
Cost: Gas pressure washers are typically more expensive than electric pressure washers. This is because gas pressure washers require a gasoline engine, which is more expensive than the electric motor used in electric pressure washers.
Noise: Gas pressure washers are typically louder than electric pressure washers. This is because gas pressure washers use a gasoline engine, which is louder than the electric motor used in electric pressure washers.
Ultimately, the best type of pressure washer for you will depend on your specific needs and budget. If you need a powerful pressure washer that is mobile and does not require an electrical outlet, then a