Pressure Washer Heater Not Working [Causes & Proven Fixes]

There’s nothing more frustrating than having a pressure washer that won’t heat up. Not only is it inconvenient, but it can also be dangerous. If you’re using a pressure washer to clean your home or your car, you need the water to be hot enough to kill bacteria and remove dirt and grime.

If your pressure washer heater isn’t working, there are a few things you can check to troubleshoot the problem. In this guide, I’ll walk you through the steps to diagnose and fix a pressure washer heater that’s not working.

Most Common Reasons Of Pressure Washer Heater Not Working

Most Common Reasons Of Pressure Washer Heater Not Working

1. Faulty Thermostat

The thermostat is responsible for turning on and off the heater based on the water temperature. If the thermostat is faulty, it may not be able to properly regulate the water temperature, which can prevent the heater from working properly.

2. Clogged Heater Element

The heater element is responsible for heating the water. If the heater element is clogged, it will not be able to heat the water properly, which can prevent the heater from working properly.

3. Low Water Pressure

The heater needs a certain amount of water pressure to operate properly. If the water pressure is too low, the heater will not be able to heat the water properly, which can prevent the heater from working properly.

4. Faulty Wiring

The heater is wired to the power supply. If the wiring is faulty, it may not be able to properly power the heater, which can prevent the heater from working properly.

5. Defective Heater

The heater itself may be defective. If the heater is defective, it will not be able to heat the water properly, which can prevent the heater from working properly.

How to Troubleshoot And Fix: Pressure Washer Heater Not Working

Symptoms of a Pressure Washer Heater Not Working

There are a few different symptoms that you may experience if your pressure washer heater is not working properly. These include:

The pressure washer is not producing hot water.
The pressure washer is producing cold water, even when the water heater is turned on.
The pressure washer is producing water that is only slightly warm.
The pressure washer is making a strange noise when the heater is turned on.
The pressure washer is overheating.

Causes of a Pressure Washer Heater Not Working

There are a number of different things that could cause your pressure washer heater to stop working. These include:

A faulty pressure washer heater element.
A faulty pressure washer thermostat.
A clogged pressure washer water filter.
A kinked or damaged pressure washer water hose.
A faulty pressure washer pump.

How to Troubleshoot a Pressure Washer Heater

To troubleshoot a pressure washer heater, you will need to:

1. Turn off the pressure washer and disconnect the power cord.
2. Inspect the pressure washer heater element for signs of damage. If the element is damaged, it will need to be replaced.
3. Inspect the pressure washer thermostat for signs of damage. If the thermostat is damaged, it will need to be replaced.
4. Inspect the pressure washer water filter for signs of clogging. If the filter is clogged, it will need to be cleaned or replaced.
5. Inspect the pressure washer water hose for kinks or damage. If the hose is kinked or damaged, it will need to be replaced.
6. Inspect the pressure washer pump for signs of damage. If the pump is damaged, it will need to be repaired or replaced.

How to Fix a Pressure Washer Heater

Once you have determined the cause of the problem, you can fix the pressure washer heater. To do this, you will need to:

Replace the faulty pressure washer heater element.
Replace the faulty pressure washer thermostat.
Clean or replace the pressure washer water filter.
Replace the damaged pressure washer water hose.
Repair or replace the damaged pressure washer pump.

Preventing Pressure Washer Heater Problems

You can help prevent pressure washer heater problems by:

Keeping the pressure washer heater clean.
Cleaning the pressure washer water filter regularly.
Replacing the pressure washer water hose regularly.
Inspecting the pressure washer pump regularly for signs of damage.
Following the manufacturer’s instructions for use and maintenance of the pressure washer.

FAQs: Pressure Washer Heater Not Working

Why is my pressure washer heater not working?

There are a few possible reasons why your pressure washer heater might not be working. Here are some of the most common causes:

The heater element is broken: This is the most common cause of a pressure washer heater not working. The heater element is a small metal coil that heats the water as it passes through it. If the heater element is broken, it will not be able to heat the water and the pressure washer will not work properly.

The thermostat is not working properly: The thermostat is a device that controls the temperature of the water in the pressure washer. If the thermostat is not working properly, it may not be able to turn on the heater when the water reaches the desired temperature.

The water pump is not working properly: The water pump is responsible for pumping water through the pressure washer. If the water pump is not working properly, it may not be able to provide enough water to the heater element.

The pressure washer is not getting enough power: The pressure washer needs a certain amount of power to operate properly. If the pressure washer is not getting enough power, it may not be able to turn on the heater element or pump water through the pressure washer.

How do I fix a pressure washer heater that is not working?

To fix a pressure washer heater that is not working, you will need to identify the cause of the problem. Once you have identified the cause of the problem, you can follow the steps below to fix it:

Replace the heater element: If the heater element is broken, you will need to replace it. To do this, you will need to disconnect the power to the pressure washer and then remove the old heater element. Once the old heater element is removed, you can install the new heater element.

Replace the thermostat: If the thermostat is not working properly, you will need to replace it. To do this, you will need to disconnect the power to the pressure washer and then remove the old thermostat. Once the old thermostat is removed, you can install the new thermostat.

Replace the water pump: If the water pump is not working properly, you will need to replace it. To do this, you will need to disconnect the power to the pressure washer and then remove the old water pump. Once the old water pump is removed, you can install the new water pump.

Check the power supply: If the pressure washer is not getting enough power, you will need to check the power supply. To do this, you will need to make sure that the pressure washer is plugged into an outlet that is providing the correct amount of power.

What are the safety risks of using a pressure washer with a broken heater?

There are a few safety risks associated with using a pressure washer with a broken heater. Here are some of the most important things to keep in mind:

The water from the pressure washer may be too hot to touch: This can cause burns if you accidentally touch the water.

The pressure washer may not be able to generate enough pressure to clean surfaces properly: This can make it difficult to remove dirt and grime from surfaces.

The pressure washer may not be able to generate enough heat to kill bacteria and germs: This can increase the risk of infection if you use the pressure washer to clean surfaces that are contaminated with bacteria or germs.

How can I prevent my pressure washer heater from breaking?

There are a few things you can do to prevent your pressure washer heater from breaking. Here are some of the most important things to keep in mind:

Use the pressure washer according to the manufacturer’s instructions: This includes using the correct water temperature and pressure.

Clean the pressure washer regularly: This will help to prevent dirt and debris from clogging the heater element.

Store the pressure washer in a cool, dry place: This will help to prevent the heater element from overheating.

What are the signs that my pressure washer heater is about to break?

There are a few signs that your pressure washer heater is about to break. Here are some of the most common things to look for:

The pressure washer is not generating enough heat.
The water from the pressure washer is not hot enough.
The pressure washer is making strange noises.
The pressure washer is smoking.

If you notice any of these signs, it is important to have the pressure washer heater repaired or replaced as soon as possible.

You May Like to Read: Pressure Washer Hose Not Working

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *