Pressure Washer Not Working With Water Tank [Quick Fixes]

Your pressure washer is one of the most valuable tools in your home improvement arsenal. But when it doesn’t work, it can be a major pain. There’s nothing more frustrating than trying to clean your driveway or deck, only to have your pressure washer sputter and die.

If your pressure washer isn’t working with the water tank, there are a few things you can check to troubleshoot the problem. In this guide, I’ll walk you through the most common causes of this issue and how to fix them. By the end of this guide, you’ll be able to get your pressure washer up and running again in no time.

Reasons Why Pressure Washer Not Working With Water Tank

No Water Flow

– No water coming out of the pressure washer
– Water leaking from the pressure washer
– Pressure washer making a whining noise
– Pressure washer not building pressure

Water Leaking

– Water leaking from the pump
– Water leaking from the hose
– Water leaking from the gun

Pressure Washer Not Building Pressure

– Clogged filter
– Dirty pump
– Bad pressure washer pump
– Bad pressure washer hose

How to Troubleshoot And Fix: Pressure Washer Not Working With Water Tank

Problem: Pressure washer not working with water tank

There are a few possible reasons why your pressure washer might not be working with the water tank. Here are some troubleshooting tips to help you get your pressure washer up and running again:

Check the water supply:
Make sure that the water supply to your pressure washer is turned on and that there is enough water pressure. You can check the water pressure by turning on a faucet in your home and checking the pressure gauge on your pressure washer. If the water pressure is too low, you may need to adjust the pressure regulator on your pressure washer or have the water line to your pressure washer repaired.

Check the water filter:
The water filter on your pressure washer can become clogged with dirt and debris, which can restrict water flow and prevent the pressure washer from working properly. To check the water filter, remove the filter housing and inspect the filter. If the filter is clogged, clean it with a hose or replace it with a new filter.

Check the pump:
The pump on your pressure washer is responsible for generating the pressure that powers the spray nozzle. If the pump is not working properly, it can cause the pressure washer to not work with the water tank. To check the pump, turn on the pressure washer and listen for the pump to start. If you don’t hear the pump running, you may need to have the pump repaired or replaced.

Check the hoses:
The hoses on your pressure washer can become kinked or damaged, which can prevent the water from flowing properly. To check the hoses, inspect them for any kinks or damage. If you find any kinks or damage, you will need to replace the hoses.

Solution: Pressure washer not working with water tank

Once you have identified the problem, you can follow these steps to fix the issue:

Turn off the pressure washer and disconnect the power cord:

Check the water supply:
Make sure that the water supply to your pressure washer is turned on and that there is enough water pressure.

Check the water filter:
Remove the filter housing and inspect the filter. If the filter is clogged, clean it with a hose or replace it with a new filter.

Check the pump:
Turn on the pressure washer and listen for the pump to start. If you don’t hear the pump running, you may need to have the pump repaired or replaced.

Check the hoses:
Inspect the hoses for any kinks or damage. If you find any kinks or damage, you will need to replace the hoses.

Reattach the power cord and turn on the pressure washer:
Test the pressure washer to make sure that it is working properly.

If you have followed these steps and your pressure washer is still not working, you may need to contact a qualified technician for assistance.

Prevention: How to keep your pressure washer working properly

To prevent problems with your pressure washer, here are a few tips:

Regularly clean the water filter:
The water filter on your pressure washer can become clogged with dirt and debris, which can restrict water flow and prevent the pressure washer from working properly. To prevent this, you should regularly clean the water filter.

Inspect the hoses for kinks or damage:
Kinked or damaged hoses can prevent the water from flowing properly. To prevent this, you should regularly inspect the hoses for any kinks or damage. If you find any kinks or damage, you should replace the hoses.

Store your pressure washer in a cool, dry place:
Storing your pressure washer in a cool, dry place will help to prevent it from corroding or developing other problems.

Follow the manufacturer’s instructions for use and maintenance:
The manufacturer’s instructions for your pressure washer will provide specific information on how to use and maintain your pressure washer properly. By following these instructions, you can help to prevent problems with your pressure washer.

Also Read: Pressure Washer Nozzle Not Working Well

FAQs: Pressure washer not working with water tank

Why is my pressure washer not working with the water tank?

There are a few possible reasons why your pressure washer might not be working with the water tank.

The water tank is empty: Make sure that the water tank is full of water before using the pressure washer.

The water inlet hose is kinked or blocked: Check the water inlet hose to make sure that it is not kinked or blocked. If it is, straighten out the hose or remove the blockage.

The water pump is not working properly: If the water pump is not working properly, it will not be able to pump water from the water tank to the pressure washer. You can check the water pump by turning on the pressure washer and listening for the sound of the pump. If you do not hear the pump running, you will need to have the pressure washer serviced.

The pressure washer is not getting enough water pressure: If the pressure washer is not getting enough water pressure, it will not be able to clean effectively. You can check the water pressure by turning on the pressure washer and spraying water on a surface. If the water stream is weak, you will need to have the pressure washer serviced.

How do I fix a pressure washer that is not working with the water tank?

To fix a pressure washer that is not working with the water tank, you will need to identify the problem and then take the appropriate steps to fix it.

If the water tank is empty, fill it up with water:

If the water inlet hose is kinked or blocked, straighten out the hose or remove the blockage:

If the water pump is not working properly, have the pressure washer serviced:

If the pressure washer is not getting enough water pressure, have the pressure washer serviced:

What are the common problems with pressure washers?

The most common problems with pressure washers include:

The water tank is empty:

The water inlet hose is kinked or blocked:

The water pump is not working properly:

The pressure washer is not getting enough water pressure:

The pressure washer is leaking:

The pressure washer is not cleaning effectively:

How can I prevent problems with my pressure washer?

You can prevent problems with your pressure washer by following these tips:

Always check the water tank before using the pressure washer: Make sure that the tank is full of water and that the water inlet hose is not kinked or blocked.

Use the pressure washer according to the manufacturer’s instructions: Do not exceed the maximum pressure rating for the pressure washer.

Clean the pressure washer after each use: This will help to prevent build-up of dirt and debris, which can damage the pressure washer.

Store the pressure washer in a cool, dry place: This will help to protect the pressure washer from the elements.

What should I do if my pressure washer is still not working?

If your pressure washer is still not working after you have tried the troubleshooting tips above, you should contact a qualified technician for help.