Pressure Washer Pump Not Working: [Quick Fixes]

A pressure washer is a powerful tool that can be used for a variety of tasks, from cleaning driveways to removing paint. However, when the pump on a pressure washer stops working, it can be a major inconvenience. Not only is it frustrating to be unable to use your pressure washer, but it can also be dangerous if you try to use it when the pump is not working properly.

In this guide, we will discuss the most common causes of a and provide instructions on how to troubleshoot and repair the problem. By following these steps, you can quickly and easily get your pressure washer back up and running in no time.

Most Common Reasons Pressure Washer Pump Not Working

Most Common Reasons

Dirty or clogged filter:
The most common reason for a is a dirty or clogged filter. The filter prevents dirt and debris from entering the pump, and if it becomes clogged, it can restrict the flow of water and prevent the pump from generating pressure. To fix this problem, remove the filter and clean it with a brush or compressed air.

Low water pressure:
If the water pressure at your home is too low, it can also cause the pressure washer pump to not work properly. To check the water pressure, turn on the faucet and attach a pressure gauge. The water pressure should be at least 40 psi. If the water pressure is too low, you may need to contact your local water provider.

Faulty pump:
If the pressure washer pump is faulty, it will not be able to generate pressure. To check the pump, turn on the pressure washer and listen for any unusual noises. If you hear a loud whining noise, the pump may be faulty and will need to be replaced.

Blocked hose:
A blocked hose can also prevent the pressure washer from generating pressure. To check the hose, disconnect it from the pump and look for any obstructions. If you find any obstructions, remove them and reconnect the hose.

Incorrect oil level:
Some pressure washers require oil to lubricate the pump. If the oil level is too low, it can cause the pump to overheat and fail. To check the oil level, refer to the owner’s manual.

Defective electrical components:
The pressure washer pump is powered by an electric motor. If any of the electrical components are defective, it can prevent the pump from working. To check the electrical components, you will need to have a qualified electrician inspect the pressure washer.

Additional tips:

If you are not sure how to fix the problem, it is best to consult a qualified technician.
Always wear safety glasses when working on a pressure washer.
Be careful not to spray yourself or others with the pressure washer.

How to Troubleshoot: Pressure Washer Pump Not Working

Symptoms of a Pressure Washer Pump Not Working

There are a few different symptoms that can indicate that your pressure washer pump is not working properly. These include:

The pressure washer is not producing any pressure

The pressure washer is producing low pressure

The pressure washer is making strange noises

The pressure washer is leaking fluid

Causes of a Pressure Washer Pump Not Working

There are a number of different things that can cause a pressure washer pump to stop working. These include:

Clogged filter:

The most common cause of a pressure washer pump not working is a clogged filter. The filter is located at the inlet of the pump and prevents dirt and debris from entering the pump. If the filter becomes clogged, it will restrict the flow of water to the pump, which can cause the pump to overheat and fail.

Low fluid level:

Another common cause of a pressure washer pump not working is a low fluid level. The pump needs a certain amount of fluid to operate properly. If the fluid level is too low, the pump will not be able to generate enough pressure to function properly.

Damaged pump:

A pressure washer pump can also be damaged by wear and tear. Over time, the pump’s seals and gaskets can wear out, which can allow fluid to leak out of the pump. This can cause the pump to overheat and fail.

Electrical problems:

Electrical problems can also cause a pressure washer pump to stop working. If the pump’s motor is not getting power, the pump will not be able to operate.

How to Troubleshoot a Pressure Washer Pump Not Working

If your pressure washer pump is not working, you can try to troubleshoot the problem yourself. Here are a few steps to follow:

1. Check the filter:
The first thing you should do is check the filter to see if it is clogged. To do this, remove the filter from the pump and inspect it for dirt and debris. If the filter is clogged, clean it with a brush or a piece of cloth.

2. Check the fluid level:
Next, you should check the fluid level in the pump. To do this, remove the cap from the fluid reservoir and check the level of fluid. If the fluid level is low, add more fluid to the reservoir.3. Check the pump for damage:
If the filter and fluid level are both okay, you should check the pump for damage. Look for any leaks or damage to the pump’s seals or gaskets. If you find any damage, you will need to replace the pump.

4. Check for electrical problems:
If the filter, fluid level, and pump are all okay, you should check for electrical problems. To do this, check the pump’s motor to make sure it is getting power. If the motor is not getting power, you will need to troubleshoot the electrical system.

How to Prevent a Pressure Washer Pump from Failing

You can help prevent your pressure washer pump from failing by following these tips:

Use the right type of fluid:
Make sure you are using the right type of fluid for your pressure washer. The wrong type of fluid can damage the pump.

Don’t overfill the fluid reservoir:
Overfilling the fluid reservoir can cause the pump to overheat and fail.

Inspect the pump regularly:
Inspect the pump regularly for leaks, damage, and other problems.

Follow the manufacturer’s instructions:
Be sure to follow the manufacturer’s instructions for using and maintaining your pressure washer.

By following these tips, you can help prevent your pressure washer pump from failing.

Also Read: Pressure Washer Soap Injector Not Working