Pressure Washer Reset Button Not Working [Fix It For Good]

Your pressure washer is one of the most important tools in your home improvement arsenal, but it can be frustrating when the reset button doesn’t work. This can prevent you from using your pressure washer to clean your home or car, and it can be a major inconvenience.

In this guide, I’ll show you how to troubleshoot a pressure washer reset button that’s not working. I’ll explain the common causes of this problem and provide step-by-step instructions on how to fix it. By the end of this guide, you’ll be able to get your pressure washer up and running again in no time.

Most Common Reasons Of Pressure Washer Reset Button Not Working

Most Common Reasons Of Pressure Washer Reset Button Not Working

1. Faulty Reset Button

The reset button is a small, delicate part that can easily be damaged. If the button is broken, it will not be able to function properly.

2. Clogged Reset Button

The reset button can become clogged with dirt and debris, which can prevent it from working properly. To clean the reset button, use a small brush or toothpick to remove any debris that is blocking it.

3. Faulty Wiring

The reset button is connected to the pressure washer’s electrical system by a wire. If the wire is damaged, it can prevent the button from working properly.

4. Faulty Control Board

The reset button is controlled by the pressure washer’s control board. If the control board is damaged, it can prevent the button from working properly.

How to Troubleshoot and Fix a Pressure Washer Reset Button

What is the reset button on a pressure washer?

The reset button on a pressure washer is a small button located on the control panel. It is typically used to reset the pressure washer after it has been turned off and on again. This can be helpful if the pressure washer is not working properly, or if it has been accidentally turned off.

Why is the reset button not working?

There are a few reasons why the reset button on a pressure washer may not be working. Some of the most common causes include:

The button is stuck:
If the button is stuck, it will not be able to be pressed. This can be caused by dirt or debris getting caught under the button, or by the button itself being damaged.

The button is not connected properly:
The reset button is typically connected to the pressure washer’s control panel by a wire. If the wire is damaged or disconnected, the button will not be able to function properly.

The pressure washer’s control panel is damaged:
If the control panel is damaged, it may not be able to send the signal to the reset button. This can be caused by a power surge, a drop, or other damage.

How to troubleshoot a pressure washer reset button

If the reset button on your pressure washer is not working, you can try the following troubleshooting steps:

1. Check the button for dirt or debris:
If the button is stuck, it may be because there is dirt or debris caught under it. Use a small brush or toothpick to gently remove any dirt or debris from the button.

2. Check the connection between the button and the control panel:
If the button is not connected properly, it will not be able to function properly. Inspect the wire that connects the button to the control panel. Make sure that the wire is not damaged or disconnected. If the wire is damaged, you will need to replace it.3. Check the control panel for damage:
If the control panel is damaged, it may not be able to send the signal to the reset button. Inspect the control panel for any signs of damage. If the control panel is damaged, you will need to replace it.

How to fix a pressure washer reset button

If you have determined that the reset button on your pressure washer is not working, you can try to fix it by following these steps:

1. Remove the pressure washer’s control panel:
To do this, you will need to locate the screws that hold the control panel in place. Once you have located the screws, unscrew them and remove the control panel.

2. Inspect the reset button:
Inspect the reset button for dirt or debris. If there is any dirt or debris, use a small brush or toothpick to gently remove it.3. Check the connection between the button and the control panel:
Inspect the wire that connects the button to the control panel. Make sure that the wire is not damaged or disconnected. If the wire is damaged, you will need to replace it.

4. Replace the control panel:
Once you have repaired the reset button, you can replace the control panel. To do this, simply reverse the steps you took to remove the control panel.

Conclusion

The reset button on a pressure washer is a small but important part of the machine. If the reset button is not working, it can prevent you from using your pressure washer properly. By following the troubleshooting steps in this article, you can hopefully fix the problem and get your pressure washer back up and running.

FAQs: Pressure Washer Reset Button Not Working

Why is my pressure washer reset button not working?

There are a few possible reasons why your pressure washer reset button may not be working.

The button may be stuck: If the button is stuck, you can try to unstick it by using a toothpick or other small object to pry it up.

The button may be damaged: If the button is damaged, you will need to replace it.

The pressure washer may be overheating: If the pressure washer is overheating, the reset button may not work. To fix this, you will need to let the pressure washer cool down.

The pressure washer may have a problem with the electrical system: If the pressure washer has a problem with the electrical system, the reset button may not work. To fix this, you will need to have the pressure washer serviced.

How do I reset my pressure washer if the reset button is not working?

If the reset button is not working, you can try to reset the pressure washer by following these steps:

1. Turn off the pressure washer and disconnect it from the power outlet.
2. Locate the reset button on the pressure washer.
3. Press and hold the reset button for 5 seconds.
4. Turn on the pressure washer and reconnect it to the power outlet.

If the reset button is still not working, you will need to have the pressure washer serviced.

What are the signs of a pressure washer that needs to be reset?

There are a few signs that your pressure washer may need to be reset.

The pressure washer is not working properly.
The pressure washer is making strange noises.
The pressure washer is overheating.
The pressure washer is leaking water.

If you see any of these signs, you should try to reset the pressure washer. If the pressure washer is still not working properly after you have reset it, you will need to have it serviced.

How often should I reset my pressure washer?

You should reset your pressure washer whenever it is not working properly. You should also reset your pressure washer if it has been sitting idle for a long period of time.

What are the dangers of using a pressure washer with a broken reset button?

There are a few dangers of using a pressure washer with a broken reset button.

The pressure washer may not work properly.
The pressure washer may overheat.
The pressure washer may leak water.
The pressure washer may cause damage to property or injure someone.

If you have a pressure washer with a broken reset button, you should not use it until you have it repaired.

You May Like to Read: Pressure Washer Siphon Tube Not Working