Pressure Washer Siphon Tube Not Working [Fix It Now!]

If your pressure washer siphon tube isn’t working, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s a simple solution. In this guide, I’ll walk you through the steps to troubleshoot and fix a clogged or malfunctioning siphon tube.

I’ll also provide tips on how to prevent this problem from happening in the future. So if you’re ready to get your pressure washer up and running again, let’s get started!

Most Common Reasons Of Pressure Washer Siphon Tube Not Working

Most Common Reasons Of Pressure Washer Siphon Tube Not Working

Clogged Siphon Tube

The most common reason for a pressure washer siphon tube not working is a clogged siphon tube. This can be caused by dirt, debris, or other materials blocking the tube. To fix this problem, you will need to clean the siphon tube.

Damaged Siphon Tube

Another common reason for a pressure washer siphon tube not working is a damaged siphon tube. This can be caused by kinking, bending, or crushing the tube. To fix this problem, you will need to replace the siphon tube.

Incorrect Siphon Tube Installation

A third common reason for a pressure washer siphon tube not working is incorrect siphon tube installation. This can be caused by not connecting the tube properly, or by not using the correct size of tube. To fix this problem, you will need to disconnect the tube and reconnect it correctly. You may also need to replace the tube if it is the wrong size.

Low Water Pressure

A fourth common reason for a pressure washer siphon tube not working is low water pressure. This can be caused by a number of factors, including a clogged water filter, a faulty water pump, or a low water supply. To fix this problem, you will need to identify and fix the source of the low water pressure.

Incorrect Water Temperature

A fifth common reason for a pressure washer siphon tube not working is incorrect water temperature. The water temperature should be between 50°F and 100°F. If the water temperature is too low, the water will not vaporize properly and the siphon tube will not work. If the water temperature is too high, the water will vaporize too quickly and the siphon tube will not be able to draw water.

Incorrect Detergent Concentration

A sixth common reason for a pressure washer siphon tube not working is incorrect detergent concentration. The detergent concentration should be between 0.5% and 1.0%. If the detergent concentration is too low, the detergent will not be effective and the siphon tube will not work. If the detergent concentration is too high, the detergent will clog the siphon tube and it will not work.

How to Troubleshoot And Fix: Pressure Washer Siphon Tube Not Working

Symptoms of a Pressure Washer Siphon Tube Not Working

There are a few telltale signs that your pressure washer siphon tube may not be working properly. These include:

The pressure washer is not producing as much pressure as it should.
The pressure washer is making a gurgling or bubbling sound.
The pressure washer is leaking water from the siphon tube.
The pressure washer is not cleaning as well as it should.

Causes of a Pressure Washer Siphon Tube Not Working

There are a number of things that can cause a pressure washer siphon tube to stop working properly. These include:

A kinked or blocked siphon tube:
If the siphon tube is kinked or blocked, it will prevent the water from flowing properly from the tank to the pump.

A clogged filter:
If the filter in the siphon tube is clogged, it will also prevent the water from flowing properly.

A faulty pump:
If the pump is faulty, it may not be able to generate enough pressure to push the water through the siphon tube.

A faulty pressure washer:
If the pressure washer itself is faulty, it may not be able to generate enough pressure to push the water through the siphon tube.

How to Troubleshoot a Pressure Washer Siphon Tube Not Working

To troubleshoot a pressure washer siphon tube that is not working properly, you will need to:

1. Inspect the siphon tube for kinks or blockages:
Look for any kinks or blockages in the siphon tube. If you find any, try to straighten them out or remove the blockage.

2. Check the filter in the siphon tube:
Remove the filter from the siphon tube and inspect it for clogs. If the filter is clogged, clean it or replace it.3. Check the pump:
Turn on the pressure washer and listen for any unusual sounds. If the pump is making a gurgling or bubbling sound, it may be faulty. You can test the pump by disconnecting the siphon tube from the pump and running the pressure washer. If the pressure washer works without the siphon tube, the pump is faulty.

4. Check the pressure washer:
If the pressure washer itself is faulty, it may not be able to generate enough pressure to push the water through the siphon tube. You can test the pressure washer by connecting a hose to the outlet and turning on the pressure washer. If the pressure washer does not produce any pressure, it is faulty.

How to Fix a Pressure Washer Siphon Tube Not Working

Once you have identified the cause of the problem, you can fix the pressure washer siphon tube.

To fix a kinked or blocked siphon tube, straighten out the kink or remove the blockage.

To fix a clogged filter, clean the filter or replace it.

To fix a faulty pump, replace the pump.

To fix a faulty pressure washer, have the pressure washer repaired or replaced.

Preventing Problems with Your Pressure Washer Siphon Tube

You can help prevent problems with your pressure washer siphon tube by:

Inspecting the siphon tube regularly for kinks or blockages:

Cleaning the filter in the siphon tube regularly:

Keeping the pump in good working order:

Using the pressure washer according to the manufacturer’s instructions:

By following these tips, you can help keep your pressure washer siphon tube working properly and avoid costly repairs.

FAQs: Pressure Washer Siphon Tube Not Working

What is a siphon tube?

A siphon tube is a flexible hose that connects the water inlet of a pressure washer to a water source, such as a garden hose or a bucket.

Why is my siphon tube not working?

There are a few possible reasons why your siphon tube may not be working.

The tube is kinked or blocked: Check the tube for any kinks or blockages that could be preventing water from flowing through it.

The tube is not the right size: The tube should be the same diameter as the water inlet on your pressure washer. If the tube is too small, it will restrict the flow of water and cause the pressure washer to lose power.

The tube is not properly connected: Make sure the tube is securely connected to the water inlet on your pressure washer and to the water source.

The water source is not providing enough pressure: If the water source is not providing enough pressure, the siphon tube will not be able to draw water into the pressure washer.

How do I fix a siphon tube that is not working?

To fix a siphon tube that is not working, follow these steps:

1. Check the tube for any kinks or blockages. If you find a kink or blockage, straighten it out or remove it.
2. Make sure the tube is the right size. If the tube is too small, replace it with a larger tube.
3. Check the connections to make sure they are secure. If the connections are loose, tighten them.
4. Check the water source to make sure it is providing enough pressure. If the water source is not providing enough pressure, try using a different water source or increasing the water pressure.

What can I do to prevent my siphon tube from malfunctioning?

To prevent your siphon tube from malfunctioning, follow these tips:

Use a high-quality siphon tube that is made from durable materials.
Avoid kinking or blocking the tube.
Make sure the tube is the right size for your pressure washer.
Securely connect the tube to the water inlet on your pressure washer and to the water source.
Use a water source that provides enough pressure.

What are the signs of a faulty siphon tube?

There are a few signs that may indicate that your siphon tube is faulty.

The pressure washer is not producing enough pressure.
The pressure washer is losing power.
The pressure washer is making a strange noise.
The pressure washer is leaking water.

If you notice any of these signs, it is possible that your siphon tube is faulty and needs to be replaced.

You May Like to Read: Pressure Washer Water Pump Not Working