Remington Chainsaw Oiler Not Working: [You Should Try This]

As a chainsaw repair professional, I’ve seen my fair share of Remington chainsaw oiler problems. I know how frustrating it can be when your chainsaw isn’t properly lubricated, and I understand the importance of quickly diagnosing and resolving the issue.

In this guide, I’ll walk you through the steps of troubleshooting a Remington chainsaw oiler that’s not working. I’ll cover everything from common causes of the problem to specific troubleshooting procedures. By the end of this guide, you’ll be able to identify and fix the issue, so you can get back to using your chainsaw without delay.

Most Common Reasons Of Remington Chainsaw Oiler Not Working

Most Common Reasons Of Remington Chainsaw Oiler Not Working

1. Oiler Hose Is Clogged

The most common reason for a Remington chainsaw oiler not working is a clogged oiler hose. This can happen if the oil becomes thick and sticky, or if dirt and debris builds up in the hose. To fix this problem, you will need to clean or replace the oiler hose.

2. Oiler Pump Is Not Working

Another common reason for a Remington chainsaw oiler not working is a faulty oiler pump. The oiler pump is responsible for sending oil to the chain, and if it is not working properly, the chain will not be lubricated properly. To fix this problem, you will need to replace the oiler pump.

3. Oiler Level Is Low

If the oil level in the chainsaw is low, the oiler will not be able to pump oil to the chain. To fix this problem, you will need to add oil to the chainsaw until the level is correct.

4. Oiler Switch Is Off

The oiler switch is a small switch on the chainsaw that controls the flow of oil to the chain. If the oiler switch is off, the oiler will not be able to pump oil to the chain. To fix this problem, you will need to turn the oiler switch on.

5. Oil Filter Is Clogged

The oil filter is a small filter that helps to clean the oil before it is sent to the chain. If the oil filter is clogged, it can prevent the oil from flowing to the chain. To fix this problem, you will need to clean or replace the oil filter.

How to Troubleshoot: Remington Chainsaw Oiler Not Working

Symptoms of a Chainsaw Oiler Not Working

There are a few telltale signs that your chainsaw oiler is not working properly. These include:

The chainsaw chain is not being lubricated properly, which can lead to overheating and damage to the chain.
The oil level in the oil reservoir is low or empty.
The oiler is not pumping oil to the chain.
The oiler is making a strange noise.

Troubleshooting a Chainsaw Oiler

If you suspect that your chainsaw oiler is not working properly, you can troubleshoot the problem by following these steps:

1. Check the oil level in the oil reservoir. If the oil level is low or empty, fill the reservoir with fresh oil.
2. Make sure that the oiler is turned on. The oiler should have a switch or knob that you can turn to turn it on or off.
3. Listen for the oiler. The oiler should make a faint whirring noise when it is running. If you do not hear any noise, the oiler may be broken.
4. Check the oiler hose. The oiler hose connects the oil reservoir to the chain. If the hose is kinked or damaged, it can prevent oil from reaching the chain.
5. Clean the oiler screen. The oiler screen is a small mesh filter that prevents dirt and debris from entering the oil reservoir. If the oiler screen is clogged, it can prevent oil from flowing to the chain.

How to Repair a Chainsaw Oiler

If you have determined that your chainsaw oiler is not working properly, you can repair it by following these steps:

1. If the oil level is low or empty, fill the reservoir with fresh oil.
2. Turn on the oiler.
3. Listen for the oiler. If you do not hear any noise, the oiler may be broken.
4. Check the oiler hose. If the hose is kinked or damaged, replace it with a new hose.
5. Clean the oiler screen. If the oiler screen is clogged, clean it with a small brush or a toothpick.

Preventing Chainsaw Oiler Problems

You can prevent chainsaw oiler problems by following these tips:

Keep the oil level in the oil reservoir topped off.
Turn on the oiler before you start using the chainsaw.
Listen for the oiler. If you do not hear any noise, the oiler may be broken.
Check the oiler hose regularly for kinks or damage.
Clean the oiler screen regularly.

By following these tips, you can help to ensure that your chainsaw oiler is working properly and that your chainsaw is properly lubricated.

Also Check: Remington Electric Chainsaw Oiler Not Working

FAQs: Remington Chainsaw Oiler Not Working

Why is my Remington chainsaw oiler not working?

There are a few reasons why your Remington chainsaw oiler might not be working. Here are some of the most common causes:

The oiler is not plugged in properly. Make sure that the oiler is plugged into an outlet and that the outlet is working.
The oiler is not turned on. Check to make sure that the oiler is turned on.
The oiler is clogged. The oiler can become clogged with sawdust or other debris, which can prevent the oil from flowing properly. To clean the oiler, remove the oil reservoir and clean it with a soft cloth.
The oiler is not the correct size for your chainsaw. Make sure that the oiler is the correct size for your chainsaw. If the oiler is too small, it will not be able to hold enough oil to lubricate the chain properly. If the oiler is too large, it will not be able to fit on your chainsaw.

How do I fix my Remington chainsaw oiler?

To fix your Remington chainsaw oiler, you will need to identify the cause of the problem. Once you have identified the cause, you can follow the steps below to fix the problem:

If the oiler is not plugged in properly, plug it into an outlet and make sure that the outlet is working.
If the oiler is not turned on, turn it on.
If the oiler is clogged, remove the oil reservoir and clean it with a soft cloth.
If the oiler is not the correct size for your chainsaw, replace it with an oiler that is the correct size.

What type of oil should I use in my Remington chainsaw oiler?

You should use a high-quality, synthetic chainsaw oil in your Remington chainsaw oiler. Synthetic oil is designed to resist evaporation and oxidation, which can help to keep your chainsaw running smoothly.

How often should I oil my Remington chainsaw?

You should oil your Remington chainsaw every time you use it. If you are using your chainsaw for heavy-duty work, you may need to oil it more frequently.

What are the signs of a bad chainsaw oiler?

There are a few signs that your chainsaw oiler may be bad. These include:

The chain is not being lubricated properly. This can cause the chain to overheat and wear out quickly.
The oiler is making a loud noise. This could be a sign that the oiler is clogged or damaged.
The oiler is leaking oil. This can be a fire hazard and can also damage your chainsaw.

 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *