Remington Electric Chainsaw Oiler Not Working: [Cause & Proven Fixes]

As a chainsaw repair professional, I have seen firsthand the frustration and inconvenience that can be caused by a . A non-functioning oiler can quickly lead to damage to the chainsaw chain and bar, which can be costly to repair. In this troubleshooting guide, I will walk you through the steps to quickly diagnose and resolve the issue so that you can get your chainsaw back up and running in no time.

Most Common Reasons Of Remington Electric Chainsaw Oiler Not Working

Clogged Oil Hole
A common reason for the Remington electric chainsaw oiler not working is a clogged oil hole. Sawdust or debris can block the oil hole
preventing proper lubrication of the bar and chain.
Faulty Oil Reservoir
If the oil reservoir is faulty
it may not supply enough oil to the bar and chain. This can occur due to issues such as a clogged or malfunctioning oil pump.
Damaged Oil Pump
A damaged oil pump can lead to inadequate oil supply to the bar and chain. This can result from wear and tear
mechanical issues
or blockages within the pump system.
Diaphragm Rupture
In some cases
a ruptured diaphragm can cause the oil to flow into the engine instead of reaching the chain. This can lead to smoking and insufficient lubrication of the chain.

How to Troubleshoot: Remington Electric Chainsaw Oiler Not Working

Symptoms

If your Remington electric chainsaw oiler is not working, you may notice one or more of the following symptoms:

The chainsaw chain is not being lubricated properly.
The chainsaw chain is getting too hot.
The chainsaw chain is smoking.
The chainsaw chain is making a loud noise.
The chainsaw chain is skipping or jumping.

Causes

There are a number of possible causes for a Remington electric chainsaw oiler not working. Some of the most common causes include:

The oiler is not plugged in properly. Make sure that the oiler is plugged into an outlet and that the outlet is working properly.
The oiler is not turned on. Check to make sure that the oiler is turned on.
The oiler is clogged. The oiler may be clogged with sawdust or other debris. Clean the oiler according to the manufacturer’s instructions.
The oiler is not pumping oil. The oiler may not be pumping oil because the oil pump is damaged. Replace the oil pump if necessary.
The oil level is too low. The oil level in the oiler may be too low. Add oil to the oiler until the level is up to the fill line.

Troubleshooting

To troubleshoot a Remington electric chainsaw oiler that is not working, follow these steps:

1. Check the oiler is plugged in properly and turned on.
2. Check the oil level in the oiler. Add oil to the oiler if necessary.
3. Clean the oiler. Remove the oiler from the chainsaw and clean it according to the manufacturer’s instructions.
4. Replace the oil pump. If the oil pump is damaged, replace it with a new one.

Prevention

To prevent your Remington electric chainsaw oiler from malfunctioning, follow these tips:

Keep the oiler clean and free of debris.
Check the oil level regularly and add oil as needed.
Replace the oil pump if it becomes damaged.

By following these tips, you can help to ensure that your Remington electric chainsaw oiler continues to work properly.

Also Check: Resident Evil 7 Chainsaw Not Working

FAQs: Remington Electric Chainsaw Oiler Not Working

Why is my Remington electric chainsaw oiler not working?

There are a few possible reasons why your Remington electric chainsaw oiler may not be working.

The oiler may be clogged. If the oiler is clogged, it will not be able to pump oil to the chain. To check if the oiler is clogged, remove the oiler cover and look inside. If you see a build-up of oil or debris, clean the oiler with a small brush or compressed air.
The oiler may be empty. If the oiler is empty, it will not be able to pump oil to the chain. To check if the oiler is empty, look at the oil level indicator. If the oil level is low, add oil to the oiler.
The oiler may be turned off. If the oiler is turned off, it will not be able to pump oil to the chain. To check if the oiler is turned on, look at the oiler switch. If the switch is in the Off position, turn it to the On position.
The oiler may be defective. If the oiler is defective, it will not be able to pump oil to the chain. If you have checked all of the other possible causes and the oiler is still not working, you may need to replace the oiler.

How do I fix a clogged Remington electric chainsaw oiler?

To fix a clogged Remington electric chainsaw oiler, you will need to clean the oiler.

1. Remove the oiler cover.
2. Use a small brush or compressed air to clean the inside of the oiler.
3. Reattach the oiler cover.

How do I add oil to a Remington electric chainsaw oiler?

To add oil to a Remington electric chainsaw oiler, you will need to:

1. Locate the oil reservoir.
2. Remove the oil cap.
3. Add oil to the reservoir until the oil level reaches the fill line.
4. Replace the oil cap.

How do I turn on the oiler on a Remington electric chainsaw?

To turn on the oiler on a Remington electric chainsaw, you will need to:

1. Locate the oiler switch.
2. Flip the switch to the On position.

What should I do if my Remington electric chainsaw oiler is still not working?

If your Remington electric chainsaw oiler is still not working after you have tried all of the troubleshooting steps above, you may need to replace the oiler. To replace the oiler, you will need to:

1. Remove the old oiler.
2. Install the new oiler.
3. Add oil to the oiler.
4. Turn on the oiler.