Sears Chainsaw Oiler Not Working: [Solved]

As a chainsaw owner, there’s nothing more frustrating than having your saw’s oiler not work properly. Not only can it lead to damage to your saw, but it can also be a safety hazard. If your saw isn’t properly lubricated, it can overheat and start a fire.

In this guide, I’ll walk you through the steps to troubleshoot a Sears chainsaw oiler that’s not working. I’ll cover everything from simple fixes like checking the oil level to more complex repairs like replacing the oil pump.

By the end of this guide, you’ll be able to diagnose and resolve the issue so that your saw is back up and running in no time.

Most Common Reasons Of Sears Chainsaw Oiler Not Working

Most Common Reasons Of Sears Chainsaw Oiler Not Working

1. Oiler Hose Blocked

The most common reason for a Sears chainsaw oiler not working is a blocked oiler hose. This can be caused by dirt, sawdust, or other debris getting into the hose and preventing the oil from flowing properly. To fix this problem, you will need to remove the oiler hose from the chainsaw and clean it thoroughly.

2. Oiler Pump Malfunction

Another common cause of a Sears chainsaw oiler not working is a malfunction in the oiler pump. This can be caused by a worn-out pump, a damaged pump gasket, or a clogged pump screen. To fix this problem, you will need to remove the oiler pump from the chainsaw and inspect it for damage. If the pump is damaged, you will need to replace it.

3. Oil Level Too Low

If the oil level in the chainsaw is too low, the oiler will not be able to pump oil to the chain. To fix this problem, you will need to add oil to the chainsaw until the level reaches the full mark.

4. Oil Filter Clogged

A clogged oil filter can also prevent the oil from flowing properly to the chain. To fix this problem, you will need to remove the oil filter from the chainsaw and clean it thoroughly.

5. Oil Pump Not Aligned

If the oil pump is not aligned properly, it will not be able to pump oil to the chain. To fix this problem, you will need to align the oil pump according to the manufacturer’s instructions.

How to Troubleshoot: Sears Chainsaw Oiler Not Working

Symptoms of a Chainsaw Oiler Not Working

There are a few different symptoms that can indicate that your chainsaw oiler is not working properly. These include:

The chain is not being lubricated properly, which can lead to overheating and damage to the chain.
The oil reservoir is empty or low, even though you have been adding oil regularly.
The oiler is making a strange noise or is not working at all.

Troubleshooting a Chainsaw Oiler

If you are experiencing any of the symptoms listed above, it is important to troubleshoot the problem as soon as possible to prevent damage to your chainsaw. Here are a few things you can check:

Check the oil level. The first thing you should do is check the oil level in the reservoir. If the reservoir is empty or low, fill it up with the correct type of oil.
Check the oil line. The oil line runs from the reservoir to the chain. Make sure that the line is not kinked or damaged. If it is, replace it with a new one.
Check the oil pump. The oil pump is responsible for pumping oil from the reservoir to the chain. If the pump is not working properly, it will not be able to lubricate the chain. You can check the pump by turning the chainsaw on and watching the oil flow from the reservoir to the chain. If the oil is not flowing, the pump may need to be replaced.
Check the oil filter. The oil filter helps to keep dirt and debris out of the oil system. If the filter is clogged, it can prevent oil from flowing to the chain. You can check the filter by removing it from the chainsaw and inspecting it for damage or debris. If the filter is clogged, clean it or replace it with a new one.

Preventing Chainsaw Oiler Problems

The best way to prevent chainsaw oiler problems is to properly maintain your chainsaw. This includes:

Adding oil regularly. Make sure to add oil to the reservoir according to the manufacturer’s instructions.
Cleaning the oil line and filter. Clean the oil line and filter regularly to prevent them from becoming clogged.
Inspecting the oil pump. Inspect the oil pump regularly for damage or wear.

By following these tips, you can help to keep your chainsaw oiler working properly and prevent damage to your chainsaw.

Additional Resources

[How to Maintain a Chainsaw](https://www.thesprucecrafts.com/how-to-maintain-a-chainsaw-591178)
[How to Clean a Chainsaw Oil Line and Filter](https://www.hunker.com/13422852/how-to-clean-a-chainsaw-oil-line-and-filter)
[How to Inspect a Chainsaw Oil Pump](https://www.homedepot.com/c/how-to-inspect-a-chainsaw-oil-pump–203944370)

Also Check: Stihl 025 Chainsaw Oiler Not Working

FAQs: Sears Chainsaw Oiler Not Working

Why is my Sears chainsaw oiler not working?

There are a few possible reasons why your Sears chainsaw oiler might not be working. Here are some of the most common causes:

The oiler is not properly adjusted. The oiler needs to be adjusted so that it delivers the correct amount of oil to the chain. If the oiler is not adjusted correctly, it can either deliver too much oil, which can cause the chain to become greasy and difficult to control, or too little oil, which can cause the chain to overheat and wear out prematurely.
The oiler is clogged. The oiler can become clogged with dirt and debris, which can prevent it from delivering oil to the chain. If the oiler is clogged, you will need to clean it out before it will work properly.
The oiler is broken. If the oiler is broken, it will not be able to deliver oil to the chain at all. If you suspect that the oiler is broken, you will need to have it replaced.

How do I adjust the oiler on my Sears chainsaw?

To adjust the oiler on your Sears chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Locate the oiler adjustment screw. The oiler adjustment screw is usually located on the side of the chainsaw, near the chain.
3. Use a small screwdriver to turn the oiler adjustment screw clockwise to increase the amount of oil delivered to the chain, or counterclockwise to decrease the amount of oil delivered to the chain.
4. Re-start the chainsaw and test the oiler to make sure that it is working properly.

How do I clean the oiler on my Sears chainsaw?

To clean the oiler on your Sears chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover. The oiler cover is usually located on the side of the chainsaw, near the chain.
3. Use a small brush to clean out the inside of the oiler. Be sure to remove all of the dirt and debris.
4. Re-install the oiler cover.

How do I replace the oiler on my Sears chainsaw?

To replace the oiler on your Sears chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the old oiler. The old oiler is usually located on the side of the chainsaw, near the chain.
3. Install the new oiler. The new oiler should be the same size and type as the old oiler.
4. Re-start the chainsaw and test the oiler to make sure that it is working properly.

What should I do if my Sears chainsaw oiler is still not working after I have tried adjusting it, cleaning it, and replacing it?

If your Sears chainsaw oiler is still not working after you have tried adjusting it, cleaning it, and replacing it, you may need to take your chainsaw to a qualified service center for further diagnosis and repair.