Simoniz Pressure Washer Motor Not Working [Easy Steps]

There’s nothing more frustrating than having a pressure washer that doesn’t work. You need it to clean your car, power wash your deck, or just get the job done around the house. But when the motor doesn’t start, it can be a major pain.

If you’re dealing with a Simoniz pressure washer that won’t start, you’re not alone. This is a common problem, but it’s usually easy to fix. In this guide, I’ll walk you through the steps to troubleshoot and fix a Simoniz pressure washer that won’t start. So you can get back to cleaning your stuff as quickly as possible.

Reasons Why Simoniz Pressure Washer Motor Not Working

No Power

The pressure washer is not plugged in or the outlet is not working.
The pressure washer’s circuit breaker is tripped.
The pressure washer’s power cord is damaged.
The pressure washer’s motor is burned out.

No Water

The water supply to the pressure washer is turned off.
The water hose is kinked or blocked.
The water filter is clogged.
The pressure washer’s pump is damaged.

Low Pressure

The pressure washer’s pressure regulator is set too low.
The pressure washer’s pump is clogged.
The pressure washer’s pump is damaged.

High Pressure

The pressure washer’s pressure regulator is set too high.
The pressure washer’s pump is damaged.

Nozzle Won’t Spray

The nozzle is clogged.
The nozzle is damaged.
The pressure washer’s gun is damaged.

Pressure Washer Makes Noise

The pressure washer’s pump is making noise.
The pressure washer’s motor is making noise.
The pressure washer’s belt is making noise.

Pressure Washer Leaks

The pressure washer’s pump is leaking.
The pressure washer’s hose is leaking.
The pressure washer’s gun is leaking.

How to Troubleshoot And Fix: Simoniz Pressure Washer Motor Not Working

Symptoms of a Pressure Washer Motor Not Working

There are a few different symptoms that can indicate that your Simoniz pressure washer motor is not working properly. These include:

The pressure washer won’t start
The pressure washer makes a strange noise when it’s turned on
The pressure washer doesn’t produce any pressure
The pressure washer leaks water
The pressure washer overheats

Troubleshooting a Pressure Washer Motor Not Working

If you’re experiencing any of the symptoms listed above, it’s important to troubleshoot the problem to determine what’s causing it. Here are a few things you can check:

Check the power cord:
Make sure that the power cord is plugged in securely and that the outlet is working properly.

Check the fuse:
If your pressure washer has a fuse, check to make sure that it’s not blown.

Check the oil level:
If your pressure washer has an oil reservoir, check to make sure that the oil level is correct.

Check the air filter:
If your pressure washer has an air filter, remove it and clean it with a brush.

Check the spark plug:
If your pressure washer has a spark plug, remove it and check to make sure that it’s not damaged.

Check the fuel line:
Make sure that the fuel line is not kinked or damaged.

Check the carburetor:
If your pressure washer has a carburetor, clean it according to the manufacturer’s instructions.

How to Fix a Pressure Washer Motor Not Working

Once you’ve determined the cause of the problem, you can fix it accordingly. Here are a few tips:

Replace the power cord:
If the power cord is damaged, replace it with a new one.

Replace the fuse:
If the fuse is blown, replace it with a new one of the same amperage.

Add oil to the oil reservoir:
If the oil level is low, add oil to the reservoir until it reaches the full mark.

Clean the air filter:
If the air filter is dirty, remove it and clean it with a brush.

Replace the spark plug:
If the spark plug is damaged, replace it with a new one.

Replace the fuel line:
If the fuel line is kinked or damaged, replace it with a new one.

Clean the carburetor:
If the carburetor is dirty, clean it according to the manufacturer’s instructions.

Preventing Pressure Washer Motor Problems

The best way to prevent pressure washer motor problems is to properly maintain your pressure washer. Here are a few tips:

Inspect your pressure washer regularly for damage:
Look for signs of wear and tear, such as cracks in the hose or leaks in the pump.

Keep your pressure washer clean:
Clean the housing and the exterior of the pump regularly to prevent the build-up of dirt and debris.

Replace worn or damaged parts:
If you notice that any parts of your pressure washer are worn or damaged, replace them as soon as possible.

Store your pressure washer properly:
When you’re not using your pressure washer, store it in a cool, dry place.

By following these tips, you can help to prevent pressure washer motor problems and keep your pressure washer running smoothly for years to come.

Also Read: Simoniz Pressure Washer Soap Not Working

FAQs: Simoniz Pressure Washer Motor Not Working

Why is my Simoniz pressure washer motor not working?

There are a few possible reasons why your Simoniz pressure washer motor may not be working. Here are some of the most common causes:

The motor is not getting enough power: Make sure that the pressure washer is plugged into an outlet that is providing the correct voltage. If the outlet is not providing enough power, you may need to use a power adapter.

The motor is overheating: If the motor is overheating, it will shut down automatically to prevent damage. Allow the motor to cool down before trying to use it again.

The motor is clogged: The motor may be clogged with dirt or debris, which can prevent it from running properly. Try cleaning the motor to see if that fixes the problem.

The motor is broken: If the motor is broken, it will need to be replaced.

How do I fix a Simoniz pressure washer motor that is not working?

To fix a Simoniz pressure washer motor that is not working, you will need to identify the cause of the problem. Once you have identified the cause, you can take the appropriate steps to fix it.

If the motor is not getting enough power, you will need to make sure that the pressure washer is plugged into an outlet that is providing the correct voltage. If the outlet is not providing enough power, you may need to use a power adapter.

If the motor is overheating, you will need to allow the motor to cool down before trying to use it again.

If the motor is clogged, you will need to clean the motor to remove the dirt or debris.

If the motor is broken, you will need to replace the motor.

What are the signs of a bad Simoniz pressure washer motor?

There are a few signs that can indicate that your Simoniz pressure washer motor is bad. These signs include:

The pressure washer is not producing any pressure.
The pressure washer is making a loud noise.
The pressure washer is overheating.
The pressure washer is leaking fluid.

If you notice any of these signs, it is likely that your pressure washer motor is bad and needs to be replaced.

How much does it cost to replace a Simoniz pressure washer motor?

The cost of replacing a Simoniz pressure washer motor will vary depending on the model of the pressure washer and the cost of the replacement motor. However, you can expect to pay anywhere from $50 to $100 for a new motor.

How long does it take to replace a Simoniz pressure washer motor?

The amount of time it takes to replace a Simoniz pressure washer motor will vary depending on your skill level and the tools you have available. However, you can expect the process to take anywhere from 30 minutes to an hour.