Simpson Pressure Washer Siphon Not Working [Step-By-Step Fixes]

If your Simpson pressure washer siphon isn’t working, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s a simple fix. In this guide, I’ll walk you through the steps to troubleshoot and repair your Simpson pressure washer siphon.

I’ll start by explaining how the siphon works and what can go wrong. Then, I’ll give you step-by-step instructions on how to diagnose the problem and fix it. By the end of this guide, you’ll be able to get your Simpson pressure washer up and running again in no time.

Reasons Why Simpson Pressure Washer Siphon Not Working

Dirty Filter

The most common reason for a Simpson pressure washer siphon not working is a dirty filter. The filter prevents dirt and debris from entering the pump, but it can become clogged over time. If the filter is clogged, it will restrict the flow of water to the pump, which can cause the siphon to stop working.

Low Water Pressure

Another common cause of a Simpson pressure washer siphon not working is low water pressure. If the water pressure is too low, the pump will not be able to create enough suction to pull water up the siphon hose. This can be caused by a number of factors, such as a faulty water supply line, a clogged water filter, or a problem with the pump itself.

Blocked Siphon Hose

The siphon hose can also become blocked, which will prevent water from flowing up the hose and into the pump. This can be caused by a number of things, such as debris, kinks, or bends in the hose.

Faulty Pump

Finally, a faulty pump can also cause a Simpson pressure washer siphon not to work. If the pump is not working properly, it will not be able to create enough suction to pull water up the siphon hose. This can be caused by a number of problems, such as a worn-out impeller, a faulty valve, or a problem with the motor.

How to Troubleshoot And Fix: Simpson Pressure Washer Siphon Not Working

Symptoms of a Simpson Pressure Washer Siphon Not Working

There are a few different symptoms that you may experience if your Simpson pressure washer siphon is not working properly. These include:

The pressure washer is not producing any pressure.
The pressure washer is producing low pressure.
The pressure washer is making a gurgling or bubbling noise.
The pressure washer is leaking water from the siphon hose.

Causes of a Simpson Pressure Washer Siphon Not Working

There are a few different things that could cause your Simpson pressure washer siphon to stop working properly. These include:

A clogged siphon hose.
A kinked or damaged siphon hose.
A loose or missing siphon hose clamp.
A faulty siphon valve.

How to Troubleshoot a Simpson Pressure Washer Siphon Not Working

To troubleshoot a Simpson pressure washer siphon that is not working, you will need to:

1. Inspect the siphon hose for any clogs or damage.
2. Check the siphon hose clamp to make sure it is tight and secure.
3. Check the siphon valve to make sure it is not damaged or stuck.

If you find a clog in the siphon hose, you can clear it by using a small brush or pipe cleaner. If the siphon hose is damaged, you will need to replace it. If the siphon hose clamp is loose or missing, you will need to tighten it or replace it. If the siphon valve is damaged or stuck, you will need to replace it.

How to Fix a Simpson Pressure Washer Siphon Not Working

Once you have identified the cause of the problem, you can fix it by following these steps:

1. To fix a clogged siphon hose, you will need to clear the clog by using a small brush or pipe cleaner.
2. To fix a kinked or damaged siphon hose, you will need to replace the hose.
3. To fix a loose or missing siphon hose clamp, you will need to tighten the clamp or replace it.
4. To fix a faulty siphon valve, you will need to replace the valve.

Preventing Simpson Pressure Washer Siphon Problems

You can prevent Simpson pressure washer siphon problems by following these tips:

Keep the siphon hose free of debris.
Tighten the siphon hose clamp securely.
Replace the siphon hose if it becomes damaged.
Replace the siphon valve if it becomes damaged.

By following these tips, you can help to ensure that your Simpson pressure washer siphon continues to work properly for many years to come.

Also Read: Simpson Pressure Washer Soap Not Working

FAQs: Simpson Pressure Washer Siphon Not Working

Why is my Simpson pressure washer siphon not working?

There are a few possible reasons why your Simpson pressure washer siphon may not be working. Here are a few of the most common causes:

The siphon hose is kinked or blocked: Make sure that the hose is clear and free of kinks. If it is kinked, you can try to straighten it out or replace it.

The siphon tube is clogged: The siphon tube is a small tube that connects the water inlet to the pump. If it is clogged, you can try to clean it out with a small brush or pipe cleaner.

The pump is not primed: The pump needs to be primed before it can create suction. To prime the pump, turn on the water supply and hold the trigger on the gun until water comes out of the nozzle.

The pressure washer is not getting enough water: Make sure that the water supply is turned on and that the water pressure is high enough.

The pressure washer is too old or worn out: If your pressure washer is more than a few years old, it may be time to replace it.

How do I fix a Simpson pressure washer siphon that is not working?

To fix a Simpson pressure washer siphon that is not working, you can try the following steps:

1. Check the siphon hose for kinks or blockages. If the hose is kinked, you can try to straighten it out or replace it.
2. Clean the siphon tube. The siphon tube is a small tube that connects the water inlet to the pump. If it is clogged, you can try to clean it out with a small brush or pipe cleaner.
3. Prime the pump. The pump needs to be primed before it can create suction. To prime the pump, turn on the water supply and hold the trigger on the gun until water comes out of the nozzle.
4. Check the water supply. Make sure that the water supply is turned on and that the water pressure is high enough.
5. Replace the pressure washer. If your pressure washer is more than a few years old, it may be time to replace it.

What are the symptoms of a Simpson pressure washer siphon that is not working?

There are a few symptoms that may indicate that your Simpson pressure washer siphon is not working properly. These include:

The pressure washer is not producing enough pressure.
The pressure washer is making a loud noise.
The pressure washer is leaking water.
The pressure washer is not starting.

What are the causes of a Simpson pressure washer siphon that is not working?

There are a few possible causes of a Simpson pressure washer siphon that is not working properly. These include:

The siphon hose is kinked or blocked.
The siphon tube is clogged.
The pump is not primed.
The pressure washer is not getting enough water.
The pressure washer is too old or worn out.

How can I prevent a Simpson pressure washer siphon from not working?

There are a few things you can do to prevent a Simpson pressure washer siphon from not working. These include:

Keep the siphon hose clear of kinks and blockages.
Clean the siphon tube regularly.
Prime the pump before using the pressure washer.
Make sure that the pressure washer is getting enough water.
Replace the pressure washer if it is more than a few years old.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *