Simpson Pressure Washer Soap Dispenser Not Working [Problems & Solutions]
Your Simpson pressure washer is a powerful tool that can help you clean your home, car, and other outdoor surfaces. But what happens when the soap dispenser stops working This can be a frustrating and inconvenient problem, but it’s one that you can usually fix yourself.
In this guide, I’ll walk you through the steps to troubleshoot a Simpson pressure washer soap dispenser that’s not working. I’ll explain the common causes of this problem and show you how to fix them. So if you’re ready to get your pressure washer back in working order, let’s get started!
Most Common Reasons Of Simpson Pressure Washer Soap Dispenser Not Working
Blocked Soap Nozzle
The soap nozzle is the most common cause of a Simpson pressure washer soap dispenser not working. The nozzle can become blocked with soap residue, which prevents the soap from flowing out of the dispenser. To fix this problem, remove the nozzle and clean it with a small brush or pipe cleaner.
Clogged Hose
The hose that connects the soap dispenser to the pressure washer can become clogged with soap residue or debris. This can prevent the soap from flowing from the dispenser to the pressure washer. To fix this problem, disconnect the hose from the dispenser and the pressure washer and clean it with a hose.
Faulty Soap Dispenser
In some cases, the soap dispenser itself may be faulty. This can be caused by a broken or worn-out valve, a damaged pump, or a faulty electrical connection. If you suspect that the soap dispenser is faulty, you should contact a qualified technician for repairs.
How to Troubleshoot And Fix: Simpson Pressure Washer Soap Dispenser Not Working
Symptoms of a Simpson Pressure Washer Soap Dispenser Not Working
There are a few different symptoms that can indicate that your Simpson pressure washer soap dispenser is not working properly. These include:
The soap dispenser does not dispense any soap when you press the trigger.
The soap dispenser dispenses soap, but it does not come out in a consistent stream.
The soap dispenser dispenses soap, but it does not come out of the wand.
The soap dispenser leaks soap.
Troubleshooting a Simpson Pressure Washer Soap Dispenser Not Working
If your Simpson pressure washer soap dispenser is not working properly, there are a few things you can check to troubleshoot the problem.
1. Check the soap container:
The first thing you should do is check the soap container to make sure that it is full and that the soap is flowing freely. If the soap container is empty, fill it up and try again. If the soap container is full, but the soap is not flowing freely, you may need to clean the soap container.
2. Check the soap dispenser hose:
The next thing you should check is the soap dispenser hose. The hose can become kinked or blocked, which can prevent the soap from flowing properly. To check the hose, disconnect it from the soap container and the wand. Then, inspect the hose for any kinks or blockages. If you find any kinks or blockages, straighten out the hose or remove the blockage.
3. Check the soap dispenser valve:
The soap dispenser valve is a small valve that controls the flow of soap from the soap container to the wand. If the valve is stuck open or closed, it can prevent the soap from flowing properly. To check the valve, remove the soap dispenser from the wand. Then, use a small screwdriver to pry open the valve. If the valve is stuck, you may need to replace it.
4. Check the wand:
The wand is the part of the pressure washer that connects to the soap dispenser. If the wand is clogged, it can prevent the soap from flowing properly. To check the wand, remove it from the pressure washer and inspect it for any clogs. If you find any clogs, you can try to clear them out with a small brush. If you are unable to clear the clogs, you may need to replace the wand.
5. Check the pressure washer:
If you have checked all of the other components and the soap dispenser is still not working properly, you may need to check the pressure washer itself. The pressure washer may be too powerful or not powerful enough, which can prevent the soap from flowing properly. To check the pressure washer, consult the owner’s manual for instructions on how to adjust the pressure.
How to Fix a Simpson Pressure Washer Soap Dispenser Not Working
Once you have identified the problem with your Simpson pressure washer soap dispenser, you can fix it by following the steps below:
1. If the soap container is empty, fill it up and try again.
2. If the soap container is full, but the soap is not flowing freely, clean the soap container.
3. If the soap dispenser hose is kinked or blocked, straighten out the hose or remove the blockage.
4. If the soap dispenser valve is stuck open or closed, pry open the valve and try again.
5. If the wand is clogged, clear out the clogs or replace the wand.
6. If the pressure washer is too powerful or not powerful enough, adjust the pressure.
By following these steps, you can fix a Simpson pressure washer soap dispenser that is not working properly.
FAQs: Simpson Pressure Washer Soap Dispenser Not Working
Why is my Simpson pressure washer soap dispenser not working?
There are a few possible reasons why your Simpson pressure washer soap dispenser may not be working. Here are some of the most common causes and solutions:
The soap dispenser is clogged: This is the most common cause of a soap dispenser not working. To fix this, try cleaning the dispenser with a vinegar and water solution.
The soap dispenser is not aligned correctly: The soap dispenser should be aligned with the spray wand so that the soap flows evenly onto the surface you are cleaning. If the dispenser is not aligned correctly, the soap may not be able to reach the surface.
The soap dispenser is not turned on: Make sure that the soap dispenser is turned on. The switch is usually located on the front of the pressure washer.
The soap dispenser is empty: If the soap dispenser is empty, it will not work. Make sure that you have added soap to the dispenser before using it.
The soap dispenser is not compatible with your pressure washer: Make sure that the soap dispenser is compatible with your pressure washer. Some soap dispensers are only compatible with certain models of pressure washers.
How do I clean the soap dispenser on my Simpson pressure washer?
To clean the soap dispenser on your Simpson pressure washer, follow these steps:
1. Turn off the pressure washer and disconnect it from the power source.
2. Remove the soap dispenser from the pressure washer.
3. Fill a bucket with a vinegar and water solution.
4. Soak the soap dispenser in the vinegar and water solution for several minutes.
5. Use a toothbrush or other small brush to clean the inside of the soap dispenser.
6. Rinse the soap dispenser thoroughly with water.
7. Dry the soap dispenser with a towel.
8. Reattach the soap dispenser to the pressure washer.
How do I align the soap dispenser on my Simpson pressure washer?
To align the soap dispenser on your Simpson pressure washer, follow these steps:
1. Turn off the pressure washer and disconnect it from the power source.
2. Remove the soap dispenser from the pressure washer.
3. Align the soap dispenser with the spray wand so that the soap flows evenly onto the surface you are cleaning.
4. Reattach the soap dispenser to the pressure washer.
How do I turn on the soap dispenser on my Simpson pressure washer?
To turn on the soap dispenser on your Simpson pressure washer, follow these steps:
1. Turn on the pressure washer.
2. Press the soap dispenser switch.
3. The soap dispenser will start to dispense soap.
What do I do if my Simpson pressure washer soap dispenser is empty?
If your Simpson pressure washer soap dispenser is empty, follow these steps:
1. Turn off the pressure washer and disconnect it from the power source.
2. Remove the soap dispenser from the pressure washer.
3. Add soap to the dispenser.
4. Reattach the soap dispenser to the pressure washer.
5. Turn on the pressure washer and test the soap dispenser.
You May Like to Read: Simpson Pressure Washer Soap Injector Not Working