Simpson Pressure Washer Soap Injector Not Working [Causes & Proven Fixes]

Your Simpson pressure washer is one of the most valuable tools in your arsenal for cleaning your home and property. But when the soap injector isn’t working, it can be a major pain. Not only does it make it more difficult to get the job done, but it can also be dangerous if you’re not careful.

In this guide, I’ll show you how to troubleshoot a Simpson pressure washer soap injector that’s not working. I’ll cover the most common causes of the problem, as well as how to fix them. By the end of this guide, you’ll be able to get your pressure washer back up and running in no time.

Most Common Reasons Of Simpson Pressure Washer Soap Injector Not Working

Most Common Reasons Of Simpson Pressure Washer Soap Injector Not Working

Blocked Soap Injector

The most common reason for a Simpson pressure washer soap injector not working is a blocked soap injector. This can be caused by a build-up of soap residue, dirt, or other debris.
To fix this problem, you will need to clean the soap injector. You can do this by removing the soap injector from the pressure washer and soaking it in a vinegar and water solution. You can also use a small brush to clean the inside of the soap injector.

Incorrect Soap Type

Another common reason for a Simpson pressure washer soap injector not working is using the wrong type of soap. Some soaps are designed for use with pressure washers, while others are not.
If you are using the wrong type of soap, it can cause the soap injector to clog or malfunction. Make sure to use a soap that is specifically designed for use with pressure washers.

Low Pressure

If the pressure washer is not producing enough pressure, it can also cause the soap injector to not work properly. This can be caused by a number of problems, such as a clogged filter, a faulty pump, or a low water supply.
To fix this problem, you will need to identify the cause of the low pressure and fix it accordingly.

Faulty Soap Injector

In some cases, the soap injector itself may be faulty. This can be caused by a number of problems, such as a broken seal, a damaged diaphragm, or a faulty valve.
If you suspect that the soap injector is faulty, you will need to replace it.

How to Troubleshoot And Fix: Simpson Pressure Washer Soap Injector Not Working

Symptoms of a Simpson Pressure Washer Soap Injector Not Working

There are a few symptoms that you may notice if your Simpson pressure washer soap injector is not working properly. These include:

The soap does not come out of the wand when you press the trigger.
The soap comes out in a weak or intermittent stream.
The soap is not mixed with the water properly.
The soap is not being dispensed at the correct time.

Troubleshooting a Simpson Pressure Washer Soap Injector

If you are experiencing any of the symptoms listed above, you can try troubleshooting the soap injector yourself. Here are a few things to check:

Check the soap injector hose:
Make sure that the hose is not kinked or clogged. If it is, straighten it out or replace it.

Check the soap injector nozzle:
Make sure that the nozzle is not clogged. If it is, clean it with a small brush.

Check the soap injector diaphragm:
The diaphragm is a small rubber disk that controls the flow of soap. If it is torn or damaged, it will need to be replaced.

Check the soap injector valve:
The valve is a small plastic or metal piece that controls the flow of soap. If it is stuck or damaged, it will need to be replaced.

Fixing a Simpson Pressure Washer Soap Injector

If you are unable to troubleshoot the soap injector yourself, you will need to take your pressure washer to a qualified repair shop. The technician will be able to diagnose the problem and make the necessary repairs.

Preventing Simpson Pressure Washer Soap Injector Problems

You can help prevent problems with your Simpson pressure washer soap injector by following these tips:

Use the right type of soap:
Make sure that you are using a soap that is specifically designed for use with pressure washers.

Clean the soap injector regularly:
This will help to prevent the build-up of soap and debris, which can clog the injector.

Store the pressure washer properly:
When you are not using the pressure washer, store it in a cool, dry place. This will help to protect the soap injector from damage.

By following these tips, you can help to keep your Simpson pressure washer soap injector working properly for years to come.

FAQs: Simpson Pressure Washer Soap Injector Not Working

Why is my Simpson pressure washer soap injector not working?

There are a few possible reasons why your Simpson pressure washer soap injector might not be working.

The soap injector is clogged: This is the most common cause of a soap injector not working. To fix this, you can try cleaning the injector with a small brush or by running a vinegar and water solution through it.

The soap injector is not getting enough water: If the soap injector is not getting enough water, it will not be able to create a soapy solution. To fix this, you can try increasing the water pressure or by adjusting the nozzle on the soap injector.

The soap injector is not getting enough soap: If the soap injector is not getting enough soap, it will not be able to create a soapy solution. To fix this, you can try adding more soap to the reservoir or by adjusting the soap injector so that it is getting more soap.

The soap injector is broken: If the soap injector is broken, it will need to be replaced.

How do I clean the soap injector on my Simpson pressure washer?

To clean the soap injector on your Simpson pressure washer, you will need:

A small brush
A vinegar and water solution

1. Turn off the pressure washer and disconnect the hose from the gun.
2. Remove the soap injector from the gun.
3. Dip the brush into the vinegar and water solution and scrub the inside of the soap injector.
4. Rinse the soap injector with clean water.
5. Reattach the soap injector to the gun.

How do I increase the water pressure to my Simpson pressure washer?

To increase the water pressure to your Simpson pressure washer, you can try:

Turning up the pressure regulator on the pressure washer.
Cleaning the water filter on the pressure washer.
Replacing the water pump on the pressure washer.

How do I adjust the nozzle on the soap injector on my Simpson pressure washer?

To adjust the nozzle on the soap injector on your Simpson pressure washer, you can try:

Turning the nozzle clockwise to increase the flow of soap.
Turning the nozzle counterclockwise to decrease the flow of soap.

How do I replace the soap injector on my Simpson pressure washer?

To replace the soap injector on your Simpson pressure washer, you will need:

A new soap injector
A Phillips head screwdriver

1. Turn off the pressure washer and disconnect the hose from the gun.
2. Remove the soap injector from the gun.
3. Remove the Phillips head screws that hold the old soap injector in place.
4. Insert the new soap injector into the gun.
5. Secure the new soap injector in place with the Phillips head screws.
6. Reattach the hose to the gun.

You May Like to Read: Simpson Pressure Washer Wand Trigger Not Working