Simpson Pressure Washer Soap Not Working [Here’S The Fix!]

There’s nothing more frustrating than having a pressure washer that’s not working properly. And when the soap isn’t working, it can be even more of a headache. Not only does it make it harder to clean your surfaces, but it can also damage your pressure washer if you’re not careful.

In this guide, I’ll show you how to troubleshoot a Simpson pressure washer that’s not dispensing soap. I’ll cover the most common causes of this problem and provide step-by-step instructions on how to fix them. By the end of this guide, you’ll be able to get your pressure washer back up and running in no time.

Reasons Why Simpson Pressure Washer Soap Not Working

Incorrect Soap Type

The most common reason for Simpson pressure washer soap not working is using the wrong type of soap. Simpson pressure washers are designed to use a specific type of soap, which is typically a detergent or surfactant. Using the wrong type of soap can cause the soap to not dissolve properly, which can lead to it not being able to clean effectively.

Insufficient Soap

Another common reason for Simpson pressure washer soap not working is not using enough soap. The amount of soap you need to use will vary depending on the size of the surface you are cleaning, but you should always use enough soap to create a thick, sudsy lather. If you don’t use enough soap, the soap will not be able to properly clean the surface.

Incorrect Soap Concentration

The concentration of the soap you use can also affect how well it works. If the soap is too concentrated, it can clog the nozzle and prevent the soap from being sprayed out of the pressure washer. If the soap is too diluted, it will not be able to clean effectively.

Incorrect Water Pressure

The water pressure you use can also affect how well the soap works. If the water pressure is too high, it can cause the soap to be rinsed off the surface before it has a chance to work. If the water pressure is too low, it can prevent the soap from being able to penetrate the surface and clean it effectively.

Dirty Nozzle

A dirty nozzle can also prevent Simpson pressure washer soap from working properly. The nozzle can become clogged with dirt and debris, which can prevent the soap from being sprayed out of the pressure washer. To prevent this, you should clean the nozzle regularly.

How to Troubleshoot And Fix: Simpson Pressure Washer Soap Not Working

Symptoms

There are a few different symptoms that you may experience if your Simpson pressure washer soap is not working properly. These include:

The soap does not come out of the wand when you press the trigger.
The soap comes out of the wand in a weak stream.
The soap is not foaming properly.
The soap is not cleaning your surfaces effectively.

Causes

There are a number of different things that could cause your Simpson pressure washer soap to not work properly. These include:

The soap dispenser is clogged:
This is the most common cause of soap not working properly. The soap dispenser can become clogged with dirt, debris, or soap scum.

The soap is too thick:
If the soap is too thick, it will not come out of the wand properly.

The soap is too thin:
If the soap is too thin, it will not foam properly and will not clean your surfaces effectively.

The pressure washer is not generating enough pressure:
If the pressure washer is not generating enough pressure, the soap will not be able to reach your surfaces and clean them effectively.

Troubleshooting

To troubleshoot the problem with your Simpson pressure washer soap, you will need to first identify the cause of the problem. Here are some steps to help you troubleshoot the problem:

1. Check the soap dispenser:
If the soap dispenser is clogged, you will need to clean it out. To do this, remove the soap dispenser from the pressure washer and rinse it out with warm water. You can also use a cleaning solution to help loosen any dirt or debris.

2. Check the soap consistency:
If the soap is too thick, you can thin it out by adding a little water. If the soap is too thin, you can thicken it by adding a little more soap.3. Check the pressure washer pressure:
If the pressure washer is not generating enough pressure, you will need to adjust the pressure setting. To do this, consult the owner’s manual for your pressure washer.

Fixing the Problem

Once you have identified the cause of the problem, you can fix it. Here are some steps to help you fix the problem:

1. Clean the soap dispenser:
If the soap dispenser is clogged, you can clean it out by removing it from the pressure washer and rinsing it out with warm water. You can also use a cleaning solution to help loosen any dirt or debris.

2. Thin the soap:
If the soap is too thick, you can thin it out by adding a little water. To do this, simply add a small amount of water to the soap dispenser and stir it until the soap is the desired consistency.3. Thicken the soap:
If the soap is too thin, you can thicken it by adding a little more soap. To do this, simply add a small amount of soap to the soap dispenser and stir it until the soap is the desired consistency.

4. Adjust the pressure washer pressure:
If the pressure washer is not generating enough pressure, you will need to adjust the pressure setting. To do this, consult the owner’s manual for your pressure washer.

Preventing Future Problems

To prevent future problems with your Simpson pressure washer soap, you can take a few steps to prevent them from happening. Here are a few tips:

Clean the soap dispenser regularly:
This will help to prevent the soap dispenser from becoming clogged.

Use the correct type of soap for your pressure washer:
Not all soaps are created equal. Make sure to use a soap that is designed for use with pressure washers.

Store the soap dispenser in a cool, dry place:
This will help to prevent the soap from becoming too thick or too thin.

Adjust the pressure washer pressure as needed:
This will help to ensure that the soap is able to reach your surfaces and clean them effectively.

Also Read: Simpson Pressure Washer Trigger Not Working

FAQs: Simpson Pressure Washer Soap Not Working

Why isn’t my Simpson pressure washer soap working?

There are a few possible reasons why your Simpson pressure washer soap may not be working.

The soap is not compatible with your pressure washer: Make sure that the soap you are using is specifically designed for use with pressure washers. Some soaps are designed for use with hand-held sprayers, and will not work properly with a pressure washer.

The soap is not being applied correctly: Make sure that you are applying the soap to the surface in a thin, even layer. If you apply too much soap, it can clog the nozzle and prevent the soap from being sprayed out.

The pressure washer is not set to the correct pressure: The pressure washer should be set to a low pressure setting when applying soap. If the pressure is too high, it can cause the soap to be sprayed off the surface before it has a chance to work.

The soap is old or expired: Soap that is old or expired may not work as well as fresh soap. Make sure to check the expiration date on the soap before using it.

How do I fix my Simpson pressure washer soap not working?

To fix your Simpson pressure washer soap not working, try the following steps:

1. Check the compatibility of the soap with your pressure washer.
2. Apply the soap in a thin, even layer.
3. Set the pressure washer to a low pressure setting.
4. Check the expiration date on the soap.
5. If the problem persists, contact Simpson customer service for assistance.

What kind of soap should I use for my Simpson pressure washer?

You should use a soap that is specifically designed for use with pressure washers. Some soaps are designed for use with hand-held sprayers, and will not work properly with a pressure washer.

Here are a few tips for choosing the right soap for your Simpson pressure washer:

Look for a soap that is specifically designed for use with pressure washers.
Make sure that the soap is compatible with the type of surface you will be cleaning.
Choose a soap that is biodegradable and environmentally friendly.

Here are a few popular brands of soap that are specifically designed for use with pressure washers:

Simpson Pressure Washer Soap
Karcher Pressure Washer Soap
Greenworks Pressure Washer Soap
Ryobi Pressure Washer Soap

How do I apply soap to my Simpson pressure washer?

To apply soap to your Simpson pressure washer, follow these steps:

1. Turn on the pressure washer and set it to a low pressure setting.
2. Attach the soap dispenser to the pressure washer.
3. Fill the soap dispenser with soap.
4. Turn on the soap dispenser.
5. Spray the soap onto the surface you will be cleaning.

What is the correct pressure for applying soap to a Simpson pressure washer?

The correct pressure for applying soap to a Simpson pressure washer is 1000-1500 PSI. If the pressure is too high, it can cause the soap to be sprayed off the surface before it has a chance to work. If the pressure is too low, it will not be able to penetrate the surface and clean it properly.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *