Simpson Pressure Washer Wand Trigger Not Working [Proven Fixes!]

Your Simpson pressure washer is one of the most valuable tools in your home. It can help you clean everything from your driveway to your siding. But what happens when the wand trigger doesn’t work This is a common problem, and it can be incredibly frustrating. Not only can it make it difficult to use your pressure washer, but it can also be dangerous.

In this guide, I will show you how to troubleshoot a Simpson pressure washer wand trigger that isn’t working. I’ll walk you through the steps in detail, and I’ll provide tips on how to avoid this problem in the future. So if your wand trigger is giving you trouble, don’t despair. Just follow these steps, and you’ll be back to cleaning in no time.

Most Common Reasons Of Simpson Pressure Washer Wand Trigger Not Working

Most Common Reasons Of Simpson Pressure Washer Wand Trigger Not Working

1. Dirty Trigger

The most common reason for a Simpson pressure washer wand trigger not working is that it is dirty. The trigger mechanism can become clogged with dirt and debris, preventing it from working properly. To fix this problem, you will need to clean the trigger mechanism.

2. Broken Trigger

Another common reason for a Simpson pressure washer wand trigger not working is that it is broken. The trigger mechanism can break if it is dropped or subjected to excessive force. To fix this problem, you will need to replace the trigger mechanism.

3. Faulty Switch

The switch that controls the wand trigger can also malfunction, preventing the trigger from working properly. To fix this problem, you will need to replace the switch.

4. Leaking Hose

A leaking hose can also cause the wand trigger to not work properly. If the hose is leaking, it will not be able to build up enough pressure to activate the trigger. To fix this problem, you will need to replace the hose.

5. Clogged Nozzle

The nozzle on the wand can also become clogged, preventing the wand from spraying water. To fix this problem, you will need to clean the nozzle.

How to Troubleshoot And Fix: Simpson Pressure Washer Wand Trigger Not Working

Symptoms

There are a few symptoms that may indicate that the trigger on your Simpson pressure washer is not working properly. These include:

The trigger does not move when you press it.
The trigger moves, but the spray nozzle does not produce any water.
The spray nozzle produces a weak stream of water.
The spray nozzle produces a high-pressure stream of water.

Causes

There are a few different things that could cause the trigger on your Simpson pressure washer to stop working properly. These include:

A broken trigger assembly.
A clogged nozzle.
A kinked hose.
A problem with the pressure regulator.

Troubleshooting

To troubleshoot the problem with your Simpson pressure washer’s trigger, you will need to first identify the cause of the issue. Here are a few steps to help you do this:

1. Inspect the trigger assembly:
Look for any signs of damage or wear. If the trigger is broken, you will need to replace it.

2. Check the nozzle:
Remove the nozzle from the spray gun and inspect it for any clogs. If the nozzle is clogged, you can clean it using a wire brush or a toothpick.3. Check the hose:
Look for any kinks or leaks in the hose. If the hose is kinked, you can try to straighten it out. If the hose is leaking, you will need to replace it.

4. Check the pressure regulator:
The pressure regulator is located on the back of the pressure washer. It is a small, cylindrical device with a knob on top. Turn the knob clockwise to increase the pressure and counterclockwise to decrease the pressure. If the pressure regulator is not working properly, you will need to replace it.

Fixing the Problem

Once you have identified the cause of the problem, you can fix it by following these steps:

1. Replace the trigger assembly:
If the trigger is broken, you will need to purchase a new trigger assembly and install it on your pressure washer.

2. Clean the nozzle:
If the nozzle is clogged, you can clean it using a wire brush or a toothpick.3. Replace the hose:
If the hose is kinked or leaking, you will need to replace it.

4. Replace the pressure regulator:
If the pressure regulator is not working properly, you will need to purchase a new pressure regulator and install it on your pressure washer.

Preventing Future Problems

To prevent future problems with your Simpson pressure washer’s trigger, you can take the following steps:

Keep the trigger assembly clean and lubricated:
This will help to prevent it from becoming stuck or damaged.

Avoid kinking or damaging the hose:
This could cause the hose to leak or burst.

Check the pressure regulator regularly:
Make sure that it is working properly and that the pressure is set correctly.

By following these tips, you can help to keep your Simpson pressure washer’s trigger working properly for years to come.

FAQs: Simpson Pressure Washer Wand Trigger Not Working

Why is my Simpson pressure washer wand trigger not working?

There are a few possible reasons why your Simpson pressure washer wand trigger might not be working. Here are a few of the most common causes:

The trigger is stuck: If the trigger is stuck, you may be able to free it by spraying some WD-40 or other lubricant into the trigger mechanism. If that doesn’t work, you may need to replace the trigger assembly.

The trigger is damaged: If the trigger is damaged, it will need to be replaced.

The hose is kinked: If the hose is kinked, it will prevent the water from flowing through the trigger. Check the hose for kinks and straighten them out if necessary.

The pressure washer is not turned on: Make sure that the pressure washer is turned on and that the water is flowing through the hose.

The pressure washer is not producing enough pressure: If the pressure washer is not producing enough pressure, the trigger may not be able to activate the valve. Check the pressure washer’s manual to see what the recommended pressure is for your model.

How do I fix my Simpson pressure washer wand trigger?

To fix your Simpson pressure washer wand trigger, you will need to identify the cause of the problem. Once you have identified the cause, you can follow the steps below to fix the problem.

If the trigger is stuck, spray some WD-40 or other lubricant into the trigger mechanism. If that doesn’t work, you may need to replace the trigger assembly.

If the trigger is damaged, you will need to replace it.

If the hose is kinked, straighten it out.

If the pressure washer is not turned on, turn it on.

If the pressure washer is not producing enough pressure, adjust the pressure regulator.

What are the symptoms of a Simpson pressure washer wand trigger that is not working?

The symptoms of a Simpson pressure washer wand trigger that is not working may include:

The trigger does not move when you press it.
The water does not flow when you press the trigger.
The water flows when you press the trigger, but it is not as strong as it should be.
The trigger is difficult to press.

What are the dangers of using a Simpson pressure washer wand trigger that is not working?

There are a few dangers associated with using a Simpson pressure washer wand trigger that is not working. These include:

You may not be able to control the flow of water, which could lead to injury.
The water may not be as strong as it should be, which could make it difficult to clean surfaces.
The trigger may be difficult to press, which could lead to frustration and injury.

How can I prevent my Simpson pressure washer wand trigger from malfunctioning?

There are a few things you can do to prevent your Simpson pressure washer wand trigger from malfunctioning. These include:

Don’t overtighten the trigger: Overtightening the trigger can damage the mechanism and make it difficult to operate.

Don’t drop the pressure washer: Dropping the pressure washer can damage the trigger and other components.

Keep the pressure washer clean: A dirty pressure washer can clog the trigger mechanism and prevent it from working properly.

Inspect the pressure washer regularly: Inspect the pressure washer regularly for signs of damage or wear and tear. If you notice any problems, have them repaired or replaced as soon as possible.

You May Like to Read: Snap On Pressure Washer Not Working