Stihl Chainsaw Auto Oiler Not Working: [Proven Ways To Fix]

As a chainsaw owner, you know that a properly functioning auto oiler is essential for keeping your saw running smoothly and efficiently. When the auto oiler isn’t working properly, it can be a major inconvenience. Your saw may start to smoke or overheat, and you may even damage the chain or the bar.

In this guide, I’ll show you how to troubleshoot a Stihl chainsaw auto oiler that’s not working. I’ll cover the most common causes of the problem, as well as the steps you can take to fix it. By the end of this guide, you’ll be able to get your saw back up and running in no time.

Most Common Reasons Of Stihl Chainsaw Auto Oiler Not Working

Most Common Reasons Of Stihl Chainsaw Auto Oiler Not Working

Oiler Pump Not Working

The oiler pump may not be working if the oil level is low, the pump is clogged, or the pump is damaged.
To check the oil level, remove the oil cap and look at the oil level. If the oil level is low, add oil to the chainsaw.
To clean the oiler pump, remove the oil cap and the oiler pump. Use a small brush to clean the inside of the oiler pump.
To replace the oiler pump, remove the old oiler pump and install the new oiler pump.

Oiler Hose Clogged

The oiler hose may be clogged if there is dirt or debris in the hose.
To clean the oiler hose, remove the oiler hose from the chainsaw. Use a small brush to clean the inside of the hose.

Oiler Tube Clogged

The oiler tube may be clogged if there is dirt or debris in the tube.
To clean the oiler tube, remove the oiler tube from the chainsaw. Use a small brush to clean the inside of the tube.

Bar Oil Level Too Low

The bar oil level may be too low if the bar oil reservoir is empty.
To check the bar oil level, remove the bar oil cap and look at the oil level. If the oil level is low, add oil to the bar oil reservoir.

Bar Oil Filter Clogged

The bar oil filter may be clogged if there is dirt or debris in the filter.
To clean the bar oil filter, remove the bar oil filter from the chainsaw. Use a small brush to clean the inside of the filter.

How to Troubleshoot: Stihl Chainsaw Auto Oiler Not Working

Symptoms of a Stihl Chainsaw Auto Oiler Not Working

There are a few telltale signs that your Stihl chainsaw’s auto oiler may not be working properly. These include:

The chain is not being lubricated properly, which can lead to overheating and damage to the chain and bar.
The oil level in the reservoir is low, even after you have recently filled it.
The oiler is making a strange noise, such as a rattling or clunking sound.
The oiler is leaking oil.

If you notice any of these symptoms, it’s important to troubleshoot the problem and fix it as soon as possible. A malfunctioning auto oiler can damage your chainsaw and make it dangerous to use.

How to Troubleshoot a Stihl Chainsaw Auto Oiler

To troubleshoot a Stihl chainsaw auto oiler, you will need to:

1. Check the oil level in the reservoir.
2. Check the oiler hose for kinks or blockages.
3. Clean the oiler screen.
4. Replace the oiler pump.

Step 1: Check the oil level in the reservoir.

The first thing you should do is check the oil level in the reservoir. If the oil level is low, fill the reservoir with fresh oil. Make sure that you use the correct type of oil for your chainsaw.

Step 2: Check the oiler hose for kinks or blockages.

The next thing you should do is check the oiler hose for kinks or blockages. If the hose is kinked, straighten it out. If the hose is blocked, clear the blockage.

Step 3: Clean the oiler screen.

The oiler screen is located on the bottom of the reservoir. It helps to filter out dirt and debris from the oil. If the oiler screen is dirty, it can restrict the flow of oil to the chain. To clean the oiler screen, remove it from the reservoir and rinse it with warm, soapy water. Dry the oiler screen thoroughly before reinstalling it.

Step 4: Replace the oiler pump.

If the oiler hose and screen are clear and the oil level is correct, but the auto oiler is still not working, you may need to replace the oiler pump. The oiler pump is a small, electric motor that pumps oil to the chain. To replace the oiler pump, you will need to remove the old pump and install the new pump.

Troubleshooting Tips

Here are a few troubleshooting tips that may help you fix your Stihl chainsaw’s auto oiler:

Make sure that the oiler is turned on.
Check the oiler’s air filter for dirt and debris.
Clean the oiler’s oil reservoir.
Inspect the oiler’s oil lines for leaks.

If you have tried all of these troubleshooting tips and your Stihl chainsaw’s auto oiler is still not working, you should take your chainsaw to a qualified service center.

Preventing Stihl Chainsaw Auto Oiler Problems

You can help prevent Stihl chainsaw auto oiler problems by following these tips:

Keep the oil level in the reservoir full.
Check the oiler hose and screen for kinks or blockages regularly.
Clean the oiler screen regularly.
Replace the oiler pump as needed.

By following these tips, you can help keep your Stihl chainsaw’s auto oiler working properly and extend the life of your chainsaw.

Also Check: Stihl Chainsaw Bar Oil Not Working

FAQs about Stihl Chainsaw Auto Oiler Not Working

Why is my Stihl chainsaw auto oiler not working?

There are a few possible reasons why your Stihl chainsaw auto oiler might not be working. Here are some of the most common causes:

The oiler is not properly adjusted. The oiler needs to be adjusted so that it delivers the correct amount of oil to the chain. If the oiler is not adjusted correctly, it may not be delivering enough oil to the chain, which can cause the chain to wear out prematurely.
The oiler is clogged. The oiler can become clogged with dirt and debris, which can prevent it from delivering oil to the chain. If the oiler is clogged, you will need to clean it out in order to get it working again.
The oiler is broken. The oiler itself could be broken, which would prevent it from delivering oil to the chain. If the oiler is broken, you will need to replace it.

How do I adjust the oiler on my Stihl chainsaw?

To adjust the oiler on your Stihl chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Locate the oiler adjustment screw. The oiler adjustment screw is usually located on the side of the chainsaw, near the chain bar.
3. Use a small screwdriver to turn the oiler adjustment screw. Turning the screw clockwise will increase the amount of oil that is delivered to the chain, while turning the screw counterclockwise will decrease the amount of oil that is delivered to the chain.
4. Test the oiler by starting the chainsaw and running it for a few minutes. If the chain is not getting enough oil, turn the oiler adjustment screw clockwise. If the chain is getting too much oil, turn the oiler adjustment screw counterclockwise.

How do I clean the oiler on my Stihl chainsaw?

To clean the oiler on your Stihl chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover. The oiler cover is usually located on the side of the chainsaw, near the chain bar.
3. Use a small brush to clean out the oiler chamber. Be sure to remove all of the dirt and debris from the chamber.
4. Reinstall the oiler cover.

How do I replace the oiler on my Stihl chainsaw?

To replace the oiler on your Stihl chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the old oiler. The old oiler is usually located on the side of the chainsaw, near the chain bar.
3. Install the new oiler. The new oiler should be a direct replacement for the old oiler.
4. Start the chainsaw and run it for a few minutes to make sure that the new oiler is working properly.

What should I do if my Stihl chainsaw auto oiler is still not working?

If your Stihl chainsaw auto oiler is still not working after you have tried the steps above, you should contact a Stihl dealer for assistance.