Stihl Chainsaw Automatic Oiler Not Working: [Quick Fixes]

As a chainsaw owner, there’s nothing more frustrating than having your saw’s automatic oiler stop working. Not only does it make the saw more difficult to use, but it can also damage the saw’s engine. If your Stihl chainsaw’s automatic oiler isn’t working, don’t worry, you’re not alone. This is a common problem that can be easily diagnosed and resolved. In this guide, I’ll walk you through the steps to troubleshoot the issue and get your saw back up and running in no time.

I’ll start by explaining how the automatic oiler works and what could cause it to stop working. Then, I’ll provide you with a step-by-step guide to troubleshooting the problem. Finally, I’ll offer some tips on how to prevent the problem from happening again.

Most Common Reasons Why Stihl Chainsaw Automatic Oiler Not Working

1. Oiler Hose Clogged

The most common reason for a Stihl chainsaw automatic oiler not working is a clogged oiler hose. This can be caused by debris or sawdust blocking the hose, or by the hose becoming kinked or pinched. To check if the oiler hose is clogged, remove the oiler cover and look inside the hose. If you see any debris or blockages, you can try to clear them with a small wire or brush. If the hose is kinked or pinched, you can try to straighten it out or replace it.

2. Oiler Pump Not Working

If the oiler hose is clear and not kinked, the next thing to check is the oiler pump. The oiler pump is responsible for pumping oil from the reservoir to the chain. To check if the oiler pump is working, start the chainsaw and listen for the pump to cycle. You should be able to hear a faint whirring sound as the pump runs. If you don’t hear anything, the pump may be broken and will need to be replaced.

3. Oil Level Too Low

If the oil level in the reservoir is too low, the oiler pump may not be able to draw enough oil to lubricate the chain. To check the oil level, remove the oiler cover and look inside the reservoir. The oil level should be between the full and add marks. If the oil level is low, add more oil to the reservoir.

4. Oil Filter Clogged

The oil filter is located between the oiler pump and the chain. It helps to keep debris from entering the chain and clogging the oiler pump. If the oil filter is clogged, it can prevent oil from reaching the chain. To check if the oil filter is clogged, remove it from the chainsaw and inspect it for debris. If the filter is clogged, you can clean it with a small brush or replace it with a new one.

5. Misaligned Oiler Tube

The oiler tube is a small tube that connects the oiler pump to the chain. If the oiler tube is misaligned, it can prevent oil from reaching the chain. To check if the oiler tube is misaligned, start the chainsaw and watch the oiler tube. The oil should be flowing smoothly from the tube to the chain. If the oil is not flowing smoothly, the tube may be misaligned and will need to be adjusted.

How to Troubleshoot: Stihl Chainsaw Automatic Oiler Not Working

Symptoms of a Stihl Chainsaw Automatic Oiler Not Working

There are a few different symptoms that can indicate that your Stihl chainsaw’s automatic oiler is not working properly. These include:

The chain is not being lubricated properly, which can lead to overheating and damage to the chain and bar.
The oil level in the reservoir is low, even after the chainsaw has been used for a while.
The oiler is making a strange noise, such as a rattling or a squealing.
The oiler is not turning on at all.

Troubleshooting Steps

If you are experiencing any of the symptoms listed above, you can try the following troubleshooting steps to fix the problem:

1. Check the oil level in the reservoir. The oil level should be between the MIN and MAX marks on the reservoir. If the oil level is low, add more oil to the reservoir.
2. Check the oil line. The oil line runs from the oiler to the chain. Make sure that the oil line is not kinked or blocked. If the oil line is blocked, you may need to replace it.
3. Check the oil pump. The oil pump is responsible for pumping oil from the reservoir to the chain. If the oil pump is not working properly, you may need to replace it.
4. Check the oil filter. The oil filter helps to clean the oil before it is pumped to the chain. If the oil filter is clogged, it can prevent the oil from reaching the chain. You should clean or replace the oil filter every few months.
5. Check the oiler switch. The oiler switch is a small switch that turns the oiler on and off. Make sure that the oiler switch is turned on.

If you have tried all of these troubleshooting steps and the problem persists, you may need to take your chainsaw to a qualified service technician for further diagnosis and repair.

Preventative Maintenance

The best way to prevent problems with your Stihl chainsaw’s automatic oiler is to perform regular maintenance. This includes:

Checking the oil level in the reservoir regularly and adding more oil as needed.
Cleaning or replacing the oil filter every few months.
Cleaning the oil line if it becomes kinked or blocked.
Inspecting the oil pump and oiler switch for damage or wear.

By following these simple maintenance tips, you can help to keep your Stihl chainsaw running smoothly and efficiently.

FAQs: Stihl Chainsaw Automatic Oiler Not Working

Why is my Stihl chainsaw automatic oiler not working?

There are a few possible reasons why your Stihl chainsaw automatic oiler may not be working. Here are some of the most common causes:

The oiler is not properly installed. Make sure that the oiler is installed correctly and that the oiler hose is not kinked or blocked.
The oiler is clogged. The oiler can become clogged with sawdust or other debris, which can prevent the oil from flowing properly. To clean the oiler, remove the oiler cover and clean the inside of the oiler with a clean rag.
The oiler is not getting enough oil. The oiler may not be getting enough oil if the oil level in the chainsaw is low. Check the oil level and add oil as needed.
The oiler is not turned on. Make sure that the oiler is turned on. The oiler switch is usually located on the side of the chainsaw.

How do I fix my Stihl chainsaw automatic oiler?

To fix your Stihl chainsaw automatic oiler, you will need to identify the cause of the problem. Once you have identified the cause of the problem, you can take the following steps to fix it:

If the oiler is not properly installed, reinstall the oiler correctly.
If the oiler is clogged, clean the oiler with a clean rag.
If the oiler is not getting enough oil, add oil to the chainsaw.
If the oiler is not turned on, turn on the oiler switch.

What should I do if my Stihl chainsaw automatic oiler is still not working?

If your Stihl chainsaw automatic oiler is still not working after you have tried the above steps, you may need to take your chainsaw to a qualified service technician. A service technician can diagnose the problem and make the necessary repairs.

How often should I clean my Stihl chainsaw automatic oiler?

You should clean your Stihl chainsaw automatic oiler every time you clean your chainsaw. To clean the oiler, remove the oiler cover and clean the inside of the oiler with a clean rag.

What happens if my Stihl chainsaw automatic oiler stops working?

If your Stihl chainsaw automatic oiler stops working, your chainsaw will not be able to lubricate itself properly. This can lead to damage to the chainsaw’s engine. It is important to fix the problem as soon as possible.

Also Read: Stihl Chainsaw Brake Not Working