Stihl Chainsaw Ran Out of Gas? Here’s How to Start It!

Have you ever been in the middle of a project and your chainsaw suddenly stops working If so, you’re not alone. One of the most common reasons for a chainsaw to stop working is because it has run out of gas. But don’t worry, fixing this problem is usually quick and easy.

In this blog post, I’ll show you how to troubleshoot and fix a Stihl chainsaw that won’t start because it has run out of gas. I’ll also provide some tips on how to prevent this problem from happening in the future.

Stihl Chainsaw Ran Out Of Gas Won’T Start

Stihl Chainsaw Ran Out of Gas? Here’s How to Start It!

If your Stihl chainsaw has run out of gas, you can start it by following these steps:

1. Remove the spark plug.
2. Turn the chainsaw upside down and pour a few drops of fuel into the spark plug hole.
3. Replace the spark plug.
4. Pull the starter cord until the chainsaw starts.

Here are some tips for preventing your Stihl chainsaw from running out of gas:

Keep the fuel tank full.
Turn off the chainsaw when you’re not using it.
Don’t let the chainsaw sit for long periods of time without using it.

By following these tips, you can help keep your Stihl chainsaw running smoothly and efficiently.

Stihl Chainsaw Ran Out of Gas Won’t Start

Symptoms

The chainsaw won’t start when you pull the starter rope.
The chainsaw makes a clicking sound when you pull the starter rope.
The chainsaw starts for a second and then dies.

Causes

The chainsaw is out of gas.
The carburetor is flooded.
The spark plug is fouled.
The air filter is dirty.

Solutions

Check the fuel level. If the chainsaw is out of gas, add more gas.
Clear the carburetor. If the carburetor is flooded, follow the instructions in your chainsaw owner’s manual to clear the carburetor.
Clean the spark plug. If the spark plug is fouled, remove the spark plug and clean it with a spark plug cleaner.
Replace the air filter. If the air filter is dirty, remove the air filter and replace it with a new one.

Prevention

Keep the fuel tank full.
Avoid running the chainsaw out of gas.
Clean the carburetor regularly.
Clean the spark plug regularly.
Replace the air filter regularly.

Also Read: Stihl Chainsaw Won’T Start After Running Out Of Gas

FAQs: Stihl Chainsaw Ran Out of Gas Won’t Start

Why won’t my Stihl chainsaw start after it ran out of gas?

There are a few reasons why your Stihl chainsaw might not start after it ran out of gas.

The carburetor is flooded: When the chainsaw runs out of gas, the carburetor can become flooded with fuel. This can prevent the chainsaw from starting because the fuel can’t reach the spark plug. To fix this problem, you can try to clear the carburetor by following the instructions in your chainsaw’s owner’s manual.

The spark plug is fouled: The spark plug can also become fouled if the chainsaw runs out of gas. This can prevent the spark plug from firing, which will prevent the chainsaw from starting. To fix this problem, you can try cleaning the spark plug by following the instructions in your chainsaw’s owner’s manual.

The air filter is dirty: The air filter can also become dirty if the chainsaw runs out of gas. This can prevent the chainsaw from getting enough air, which can also prevent it from starting. To fix this problem, you can try cleaning the air filter by following the instructions in your chainsaw’s owner’s manual.

What should I do if my Stihl chainsaw won’t start after it ran out of gas?

If your Stihl chainsaw won’t start after it ran out of gas, you can try the following steps:

1. Check the carburetor to make sure it’s not flooded. If it is, you can try to clear it by following the instructions in your chainsaw’s owner’s manual.
2. Check the spark plug to make sure it’s not fouled. If it is, you can try cleaning it by following the instructions in your chainsaw’s owner’s manual.
3. Check the air filter to make sure it’s not dirty. If it is, you can try cleaning it by following the instructions in your chainsaw’s owner’s manual.
4. Try starting the chainsaw again. If it still doesn’t start, you may need to take it to a qualified service center for repairs.

How can I prevent my Stihl chainsaw from not starting after it runs out of gas?

There are a few things you can do to prevent your Stihl chainsaw from not starting after it runs out of gas.

Make sure the carburetor is clean: A dirty carburetor can prevent the chainsaw from starting. To prevent this, you should clean the carburetor regularly according to the instructions in your chainsaw’s owner’s manual.

Make sure the spark plug is clean: A fouled spark plug can also prevent the chainsaw from starting. To prevent this, you should clean the spark plug regularly according to the instructions in your chainsaw’s owner’s manual.

Make sure the air filter is clean: A dirty air filter can prevent the chainsaw from getting enough air, which can also prevent it from starting. To prevent this, you should clean the air filter regularly according to the instructions in your chainsaw’s owner’s manual.

Don’t let the chainsaw run out of gas completely: If the chainsaw runs out of gas completely, it can damage the carburetor and other parts. To prevent this, you should make sure to refill the chainsaw with gas before it runs out completely.

What are the signs that my Stihl chainsaw is running out of gas?

There are a few signs that your Stihl chainsaw is running out of gas.

The chainsaw will start to lose power.
The chainsaw will start to sputter and stall.
The chainsaw will stop running completely.

If you see any of these signs, it’s time to refill the chainsaw with gas.

What happens if I start my Stihl chainsaw without gas?

If you start your Stihl chainsaw without gas, it will not start. This is because the carburetor needs gas to function properly. If there is no gas in the carburetor, the chainsaw will not be able to start.

In addition, starting your chainsaw without gas can damage the carburetor. This is because the carburetor needs gas to lubricate the moving parts. If there is no gas in the carburetor, the moving parts can become damaged.