Stihl Long Reach Hedge Trimmer Not Working? Here’s the Fix!

No power

The trimmer is not plugged in
The battery is dead or not installed correctly
The switch is turned off
The trimmer is overheating
The trimmer is jammed

Engine won’t start

The spark plug is fouled
The air filter is dirty
The carburetor is dirty or out of adjustment
The fuel line is clogged
The engine is flooded

Trimmer is cutting unevenly

The blades are dull
The blades are misaligned
The trimmer is not properly balanced

Stihl Long Reach Hedge Trimmer Not Working

Reasons Why a Stihl Long Reach Hedge Trimmer Might Not Be Working

The trimmer is not getting enough fuel. This could be due to a clogged fuel filter, a faulty fuel line, or a problem with the carburetor.
The spark plug is not firing. This could be due to a bad spark plug, a loose spark plug wire, or a problem with the ignition coil.
The blade is dull. A dull blade will not be able to cut through branches effectively.
The trimmer is overheating. This could be due to a problem with the cooling system, such as a clogged air filter or a faulty fan.
The trimmer is not aligned properly. If the trimmer is not aligned correctly, it will not be able to cut through branches effectively.

How to Fix a Stihl Long Reach Hedge Trimmer That Is Not Working

1. Check the fuel level. Make sure that the trimmer has enough fuel. If the fuel level is low, fill up the tank.
2. Clean the fuel filter. If the fuel filter is clogged, it will prevent the trimmer from getting enough fuel. Remove the fuel filter and clean it with a clean rag.
3. Check the fuel line. If the fuel line is damaged or kinked, it will prevent the trimmer from getting enough fuel. Inspect the fuel line for damage and replace it if necessary.
4. Clean the carburetor. If the carburetor is dirty, it will not be able to deliver the correct amount of fuel to the engine. Remove the carburetor and clean it with a carburetor cleaner.
5. Check the spark plug. If the spark plug is bad, it will not be able to fire the engine. Remove the spark plug and inspect it for damage. If the spark plug is damaged, replace it with a new one.
6. Check the spark plug wire. If the spark plug wire is loose, it will not be able to deliver the spark to the spark plug. Tighten the spark plug wire securely.
7. Check the ignition coil. If the ignition coil is faulty, it will not be able to generate a spark. Inspect the ignition coil for damage and replace it if necessary.
8. Check the air filter. If the air filter is clogged, it will restrict the airflow to the engine. Remove the air filter and clean it with a clean rag.
9. Check the fan. If the fan is not working properly, it will not be able to cool the engine. Inspect the fan for damage and replace it if necessary.
10. Check the alignment of the trimmer. If the trimmer is not aligned properly, it will not be able to cut through branches effectively. Align the trimmer according to the manufacturer’s instructions.

How to Troubleshoot And Fix:

Symptoms

There are a few different symptoms that can indicate that your Stihl long reach hedge trimmer is not working properly. These include:

The trimmer won’t start
The trimmer starts but doesn’t stay running
The trimmer runs but doesn’t cut
The trimmer makes a strange noise

Causes

There are a number of different things that could cause your Stihl long reach hedge trimmer to stop working. These include:

A dirty or clogged air filter
A dirty or clogged spark plug
A faulty spark plug wire
A bad fuel filter
A bad fuel pump
A bad carburetor
A bad starter
A bad ignition switch

Troubleshooting

To troubleshoot the problem with your Stihl long reach hedge trimmer, you will need to first identify the cause of the problem. Here are a few steps to help you do this:

1. Inspect the air filter:
If the air filter is dirty or clogged, it can prevent the trimmer from getting enough air to run properly. To check the air filter, remove it from the trimmer and inspect it for dirt and debris. If the air filter is dirty, clean it according to the manufacturer’s instructions.

2. Inspect the spark plug:
If the spark plug is dirty or fouled, it can cause the trimmer to misfire or not start at all. To check the spark plug, remove it from the trimmer and inspect it for deposits. If the spark plug is dirty, clean it according to the manufacturer’s instructions. If the spark plug is fouled, replace it with a new one.3. Inspect the spark plug wire:
If the spark plug wire is damaged or loose, it can prevent the spark plug from firing properly. To check the spark plug wire, inspect it for damage or cracks. If the spark plug wire is damaged, replace it with a new one. If the spark plug wire is loose, tighten it according to the manufacturer’s instructions.

4. Inspect the fuel filter:
If the fuel filter is dirty or clogged, it can prevent the trimmer from getting enough fuel to run properly. To check the fuel filter, remove it from the trimmer and inspect it for dirt and debris. If the fuel filter is dirty, clean it according to the manufacturer’s instructions. If the fuel filter is clogged, replace it with a new one.

5. Inspect the fuel pump:
If the fuel pump is faulty, it can prevent the trimmer from getting enough fuel to run properly. To check the fuel pump, remove it from the trimmer and inspect it for damage. If the fuel pump is faulty, replace it with a new one.

6. Inspect the carburetor:
If the carburetor is dirty or faulty, it can prevent the trimmer from running properly. To check the carburetor, remove it from the trimmer and inspect it for dirt and debris. If the carburetor is dirty, clean it according to the manufacturer’s instructions. If the carburetor is faulty, replace it with a new one.

7. Inspect the starter:
If the starter is faulty, it can prevent the trimmer from starting. To check the starter, inspect it for damage. If the starter is faulty, replace it with a new one.

8. Inspect the ignition switch:
If the ignition switch is faulty, it can prevent the trimmer from starting. To check the ignition switch, inspect it for damage. If the ignition switch is faulty, replace it with a new one.

Repairing the Problem

Once you have identified the cause of the problem, you can repair it accordingly. Here are a few steps to help you repair your Stihl long reach hedge trimmer:

1. Clean the air filter:
To clean the air filter, remove it from the trimmer and rinse it with warm water. Dry the air filter thoroughly before reinstalling it.

2. Clean the spark plug:
To clean the spark plug, remove it from the trimmer and use a spark plug cleaner to clean the electrodes. Be careful not to damage the electrodes.3. Replace the spark plug wire:
To replace the spark plug wire, disconnect the old spark plug wire from the spark plug and the ignition coil. Connect the new spark plug wire to the spark plug and the ignition coil.

4. Replace the fuel filter:
To replace the fuel filter, disconnect the fuel line from the fuel filter and remove the old fuel filter. Connect the new fuel filter to the fuel line and tighten it according to the manufacturer’s instructions.

5. Replace the fuel pump:
To replace the fuel pump,

Also Read: Worx Hedge Trimmer Not Working