Stihl Pressure Washer Not Working [Fixed]

A Troubleshooting Guide

Your Stihl pressure washer is one of the most valuable tools in your home improvement arsenal. But when it stops working, it can be a major inconvenience. Not only does it mean you can’t get your chores done, but it can also be a safety hazard.

In this guide, we’ll troubleshoot the most common problems that can cause a Stihl pressure washer to stop working. We’ll also provide tips on how to prevent these problems from happening in the future.

So if your Stihl pressure washer is not working, don’t despair. With a little troubleshooting, you’ll be back to blasting away dirt and grime in no time.

Most Common Reasons Of Stihl Pressure Washer Not Working

Most Common Reasons Of Stihl Pressure Washer Not Working

No Water Flow

Blocked water inlet filter:
The water inlet filter is located at the end of the garden hose. If it is clogged, water will not be able to flow into the pressure washer. To clean the filter, remove it from the garden hose and rinse it under running water.

Clogged water outlet filter:
The water outlet filter is located inside the pressure washer. To clean the filter, remove the black cap on the side of the pressure washer and remove the filter. Rinse the filter under running water and reinsert it into the pressure washer.

Low water pressure:
If the water pressure at your home is low, it may not be enough to power the pressure washer. Check the water pressure at your home by turning on a faucet and holding your finger over the opening. If the water does not form a steady stream, the water pressure is too low. You can increase the water pressure by installing a water pressure booster pump.

Defective water pump:
If the water pump is defective, it will not be able to generate enough pressure to power the pressure washer. To test the water pump, remove the high-pressure hose from the pressure washer and attach it to a garden hose. Turn on the water and check for leaks. If there are no leaks, the water pump is probably defective. You will need to replace the water pump.

No Power

Defective power cord:
If the power cord is damaged, it will not be able to provide power to the pressure washer. To test the power cord, plug it into an outlet and turn on the pressure washer. If the pressure washer does not start, the power cord is probably defective. You will need to replace the power cord.

Defective switch:
If the switch is defective, it will not be able to turn on the pressure washer. To test the switch, turn the pressure washer on and off. If the pressure washer does not start or stop, the switch is probably defective. You will need to replace the switch.

Defective motor:
If the motor is defective, it will not be able to power the pressure washer. To test the motor, remove the air filter and look inside the pressure washer. If the motor is seized or there is damage to the windings, the motor is probably defective. You will need to replace the motor.

Other Problems

Clogged spray nozzle:
If the spray nozzle is clogged, it will not be able to produce a high-pressure stream of water. To clean the spray nozzle, remove it from the pressure washer and soak it in a vinegar solution for a few minutes. Rinse the spray nozzle under running water and reattach it to the pressure washer.

Defective trigger gun:
If the trigger gun is defective, it will not be able to control the flow of water. To test the trigger gun, hold the trigger down and check for leaks. If there are no leaks, the trigger gun is probably defective. You will need to replace the trigger gun.

How to Troubleshoot And Fix: Stihl Pressure Washer Not Working

Symptoms of a Stihl Pressure Washer Not Working

There are a few different symptoms that can indicate that your Stihl pressure washer is not working properly. These include:

The pressure washer is not producing any water.
The pressure washer is producing very little water.
The pressure washer is producing a lot of noise but no water.
The pressure washer is leaking water.
The pressure washer is overheating.

Troubleshooting a Stihl Pressure Washer Not Working

If your Stihl pressure washer is not working properly, you can try troubleshooting the problem yourself. Here are a few things to check:

Check the water supply:
Make sure that the water supply to the pressure washer is turned on and that there is no obstruction in the hose.

Check the pressure washer pump:
The pump is the heart of the pressure washer, and if it is not working properly, the pressure washer will not produce any water. To check the pump, turn on the pressure washer and listen for the sound of the pump running. If you do not hear the pump running, or if you hear a loud whining noise, the pump may be damaged and will need to be repaired or replaced.

Check the hoses:
The hoses on a pressure washer can become kinked or damaged, which can prevent the pressure washer from producing water. To check the hoses, look for any kinks or damage. If you find any damage, replace the hoses.

Check the nozzle:
The nozzle is the part of the pressure washer that directs the water stream. If the nozzle is clogged, it can prevent the pressure washer from producing water. To check the nozzle, remove it from the pressure washer and clean it with a wire brush.

Check the air filter:
The air filter on a pressure washer helps to keep the engine clean. If the air filter is dirty, it can restrict the airflow to the engine, which can cause the engine to overheat. To check the air filter, remove it from the pressure washer and clean it with a dry cloth.

Check the spark plug:
The spark plug is responsible for igniting the fuel in the engine. If the spark plug is damaged or fouled, it can cause the engine to misfire and not produce power. To check the spark plug, remove it from the engine and inspect it for damage. If the spark plug is damaged, replace it.

How to Fix a Stihl Pressure Washer Not Working

If you have troubleshooted the problem and determined that the pressure washer is not working properly, you will need to fix the problem. Here are a few common repairs that you can make to a Stihl pressure washer:

Replace the pump:
If the pump is damaged, it will need to be replaced. You can purchase a replacement pump from a Stihl dealer or online.

Replace the hoses:
If the hoses are kinked or damaged, they will need to be replaced. You can purchase replacement hoses from a Stihl dealer or online.

Replace the nozzle:
If the nozzle is clogged, it can be cleaned with a wire brush. If the nozzle is damaged, it will need to be replaced. You can purchase a replacement nozzle from a Stihl dealer or online.

Replace the air filter:
If the air filter is dirty, it can be cleaned with a dry cloth. If the air filter is damaged, it will need to be replaced. You can purchase a replacement air filter from a Stihl dealer or online.

Replace the spark plug:
If the spark plug is damaged or fouled, it will need to be replaced. You can purchase a replacement spark plug from a Stihl dealer or online.

Conclusion

If your Stihl pressure washer is not working properly, you can troubleshoot the problem and fix it yourself. If you are unable to fix the problem, you can take the pressure washer to a Stihl dealer for repairs.

FAQs: Stihl Pressure Washer Not Working

Why is my Stihl pressure washer not working?

There are a few possible reasons why your Stihl pressure washer may not be working. Here are some of the most common causes:

The pressure washer is not plugged in properly: Make sure that the power cord is plugged into an outlet and that the outlet is turned on.

The pressure washer is out of water: Check the water reservoir to make sure that it is full.

The pressure washer is clogged: The pressure washer may be clogged with dirt, debris, or soap. Try cleaning the pressure washer according to the manufacturer’s instructions.

The pressure washer is not getting enough oil: The pressure washer may not be getting enough oil if the oil level is low. Check the oil level and add oil if necessary.

The pressure washer is overheating: The pressure washer may be overheating if it is used for too long or if it is not properly maintained. Allow the pressure washer to cool down before using it again.

How do I fix a Stihl pressure washer that is not working?

To fix a Stihl pressure washer that is not working, you will need to identify the problem. Once you have identified the problem, you can follow the steps below to fix it:

If the pressure washer is not plugged in properly, plug it in securely:

If the pressure washer is out of water, fill the water reservoir:

If the pressure washer is clogged, clean it according to the manufacturer’s instructions:

If the pressure washer is not getting enough oil, add oil to the oil reservoir:

If the pressure washer is overheating, allow it to cool down before using it again:

What are the common problems with Stihl pressure washers?

The most common problems with Stihl pressure washers include:

The pressure washer is not working: This can be caused by a number of problems, such as the pressure washer not being plugged in properly, the pressure washer being out of water, the pressure washer being clogged, the pressure washer not getting enough oil, or the pressure washer overheating.

The pressure washer is leaking: This can be caused by a number of problems, such as a leak in the hose, a leak in the pump, or a leak in the seals.

The pressure washer is making a loud noise: This can be caused by a number of problems, such as a problem with the pump, a problem with the motor, or a problem with the seals.

The pressure washer is not producing enough pressure: This can be caused by a number of problems, such as a problem with the pump, a problem with the motor, or a problem with the nozzle.

The pressure washer is not cleaning properly: This can be caused by a number of problems, such as a problem with the nozzle, a problem with the detergent, or a problem with the water pressure.

How do I maintain my Stihl pressure washer?

To maintain your Stihl pressure washer, you should follow these steps:

Read the owner’s manual and follow the maintenance instructions: The owner’s manual will provide specific instructions on how to maintain your pressure washer.

Inspect the pressure washer regularly for signs of wear and tear: Look for leaks, cracks, or other damage.

Clean the pressure washer regularly: Clean the pressure washer after each use to prevent the build-up of dirt and debris.

Store the pressure washer properly: Store the pressure washer in a cool, dry place when not in use.

What are the safety precautions for using a Stihl pressure washer?

When using a Stihl pressure washer, you should take the following safety precautions:

Wear safety glasses and gloves: Safety glasses will protect your eyes from flying debris, and gloves will protect your hands from the pressure washer’s water stream.

Do not point the pressure washer at people or animals: The pressure washer’s water stream can be dangerous if it is directed at people or animals.

Do not use the pressure washer on electrical equipment: The pressure washer’s water stream can damage electrical equipment.

Do not use the pressure washer on hot surfaces: The pressure washer’s water stream can cause hot surfaces to crack or explode.

Be careful when using the pressure washer on slippery surfaces: The pressure washer’s water stream can make surfaces slippery, so be careful not to slip

You May Like to Read: Sunjoe Pressure Washer Not Working