Subaru Pressure Washer Electric Start Not Working [You Should Try This]

Do you have a Subaru pressure washer that won’t start You’re not alone. This is a common problem, and it can be frustrating and inconvenient. But don’t worry, there’s a good chance you can fix it yourself.

In this guide, I’ll walk you through the steps to troubleshoot and repair a Subaru pressure washer that won’t start. I’ll cover everything from simple checks to more complex repairs. So whether you’re a DIYer or you’re just looking for some help, I’ve got you covered.

Let’s get started!

Most Common Reasons Of Subaru Pressure Washer Electric Start Not Working

Most Common Reasons Of Subaru Pressure Washer Electric Start Not Working

1. Faulty or loose electrical connection

This is the most common cause of a Subaru pressure washer electric start not working. Make sure all of the electrical connections are tight and secure.

2. Bad starter solenoid

The starter solenoid is a small electrical switch that engages the starter motor. If the starter solenoid is bad, it will not be able to engage the starter motor and the pressure washer will not start.

3. Bad starter motor

The starter motor is the electric motor that turns the engine over. If the starter motor is bad, it will not be able to turn the engine over and the pressure washer will not start.

4. Low battery voltage

If the battery voltage is too low, the starter motor will not have enough power to turn the engine over. Check the battery voltage with a voltmeter and make sure it is at least 12 volts.

5. Dirty or corroded battery terminals

Dirty or corroded battery terminals can prevent the battery from providing enough power to the starter motor. Clean the battery terminals with a wire brush and apply a thin coat of dielectric grease.

6. Faulty ignition switch

The ignition switch is a mechanical switch that turns on the power to the starter motor. If the ignition switch is bad, it will not be able to turn on the power to the starter motor and the pressure washer will not start.

7. Bad spark plugs

Spark plugs are responsible for igniting the fuel in the engine. If the spark plugs are bad, they will not be able to ignite the fuel and the engine will not start.

8. Clogged fuel filter

The fuel filter removes dirt and debris from the fuel before it reaches the engine. If the fuel filter is clogged, it will restrict the flow of fuel to the engine and the engine will not start.

9. Bad fuel pump

The fuel pump is responsible for pumping fuel from the tank to the engine. If the fuel pump is bad, it will not be able to pump fuel to the engine and the engine will not start.

10. Bad engine control module ECM

The ECM is the computer that controls the engine. If the ECM is bad, it will not be able to properly control the engine and the engine will not start.

How to Troubleshoot and Fix: Subaru Pressure Washer Electric Start Not Working

Check the Battery

If your Subaru pressure washer electric start is not working
the first thing to check is the battery. Ensure that the battery is fully charged and properly connected. A weak or faulty battery can prevent the electric start from functioning correctly. If the battery is old or not holding a charge
consider replacing it with a new one to resolve the issue.

Inspect the Starter Motor

The starter motor is a crucial component of the electric start system. If the electric start is not working
the starter motor may be the culprit. Inspect the starter motor for any signs of damage or wear. Check the connections and wiring to ensure they are secure and free from corrosion. If the starter motor is faulty
it may need to be repaired or replaced to restore the electric start functionality.

Examine the Ignition Switch

A malfunctioning ignition switch can also lead to issues with the electric start. Check the ignition switch for any signs of damage or wear. Ensure that the switch is making proper contact and sending the signal to engage the electric start system. If the ignition switch is faulty
it may need to be replaced to resolve the electric start problem.

Verify the Electric Start System

The electric start system itself should be thoroughly inspected to identify any potential issues. Check the wiring
connections
and components of the electric start system for any signs of damage
wear
or malfunction. Verify that the electric start button or key switch is functioning correctly and sending the signal to engage the starter motor.

Consider Professional Assistance

If troubleshooting the electric start issue on your Subaru pressure washer proves challenging
it may be beneficial to seek professional assistance. A qualified pressure washer repair technician can diagnose the problem accurately and provide the necessary repairs or replacements to restore the electric start functionality.

Conclusion

In conclusion
troubleshooting and fixing a Subaru pressure washer electric start that is not working requires a systematic approach to identify and address the underlying issues. By checking the battery
inspecting the starter motor
examining the ignition switch
and verifying the electric start system
you can effectively troubleshoot and resolve the electric start problem. If needed
don’t hesitate to seek professional assistance to ensure the proper functioning of your pressure washer’s electric start system.

FAQs

1. Why is my Subaru pressure washer electric start not working?

The Subaru pressure washer electric start may not be working due to a dead battery
a faulty electric starter motor
or a problem with the ignition switch. It’s important to check the battery and connections
as well as the starter motor and ignition switch
to diagnose and resolve the issue.

2. How can I troubleshoot the electric start on my Subaru pressure washer?

To troubleshoot the electric start on your Subaru pressure washer
start by checking the battery charge and connections. Next
inspect the electric starter motor for any signs of damage or wear. Additionally
ensure that the ignition switch is functioning properly. If these components appear to be in good condition
it may be necessary to seek professional assistance for further diagnosis and repair.

3. What maintenance is required for the electric start system on a Subaru pressure washer?

Maintenance for the electric start system of a Subaru pressure washer typically involves regular inspection of the battery
connections
and electric starter motor. It’s important to keep the battery charged and clean
as well as to ensure that the connections are secure. Periodic examination of the electric starter motor for any issues is also recommended to maintain optimal performance.

4. Are there any common issues that can cause the electric start to malfunction on a Subaru pressure washer?

Common issues that can cause the electric start to malfunction on a Subaru pressure washer include a discharged or damaged battery
loose or corroded connections
a faulty electric starter motor
or a problem with the ignition switch. Regular maintenance and prompt resolution of any identified issues can help prevent these common problems.

5. Can I convert the electric start on my Subaru pressure washer to a manual pull start?

It may be possible to convert the electric start on a Subaru pressure washer to a manual pull start
depending on the specific model and design. However
such a conversion would typically require expertise in small engine repair and may void the warranty. It’s advisable to consult the manufacturer or a qualified technician to explore the feasibility and implications of such a conversion.

You May Like to Read: Sun Joe 2030 Pressure Washer Not Working