Sun Joe Electric Pressure Washer Not Working [Easy Fixes!]

Do you own a Sun Joe electric pressure washer that isn’t working You’re not alone. This is a common problem, and it can be frustrating and inconvenient. But don’t worry, there’s a good chance you can fix it yourself. In this guide, I’ll walk you through the steps to troubleshoot a Sun Joe electric pressure washer that isn’t working. I’ll also provide tips on how to prevent this problem from happening again. So if your Sun Joe pressure washer is acting up, read on for help!

Most Common Reasons Of Sun Joe Electric Pressure Washer Not Working

Most Common Reasons Of Sun Joe Electric Pressure Washer Not Working

No Power

The power cord is not plugged in properly:
Make sure that the power cord is plugged into an outlet that is turned on and that the plug is fully inserted into the outlet.

The circuit breaker is tripped:
Check the circuit breaker in the breaker box to make sure that it is not tripped. If the circuit breaker is tripped, reset it and try to turn on the pressure washer again.

The pressure washer is not getting enough power:
If the pressure washer is plugged into an outlet that is not providing enough power, the pressure washer will not work. Try plugging the pressure washer into a different outlet or try using a power strip.

No Water

The water hose is not connected properly:
Make sure that the water hose is connected to the pressure washer and to the water source.

The water source is turned off:
Make sure that the water source is turned on.

The water filter is clogged:
Clean or replace the water filter if it is clogged.

Pressure Washer Won’t Start

The pressure washer is not primed:
Prime the pressure washer by following the manufacturer’s instructions.

The pressure washer is out of gas:
Check the gas tank and add gas if necessary.

The spark plug is dirty or damaged:
Clean or replace the spark plug if necessary.

The fuel line is clogged:
Clean or replace the fuel line if necessary.

Pressure Washer Leaking

The O-rings are worn out:
Replace the O-rings if they are worn out.

The seals are damaged:
Replace the seals if they are damaged.

The hose is damaged:
Replace the hose if it is damaged.

How to Troubleshoot And Fix: sun joe electric pressure washer not working

Symptoms of a sun joe electric pressure washer not working

There are a few different symptoms that can indicate that your sun joe electric pressure washer is not working properly. These include:

The pressure washer won’t start
The pressure washer makes a strange noise
The pressure washer leaks water
The pressure washer doesn’t produce enough pressure

Troubleshooting a sun joe electric pressure washer

If your sun joe electric pressure washer is not working properly, there are a few things you can check to try to troubleshoot the problem.

1. Check the power cord:
Make sure that the power cord is plugged in securely and that the outlet is working properly.

2. Check the water supply:
Make sure that the water supply is turned on and that there is enough water pressure.

3. Check the filter:
The filter on your pressure washer can become clogged, which can restrict the flow of water and cause the pressure washer to not work properly. To check the filter, remove it from the pressure washer and clean it with a hose.

4. Check the pump:
The pump on your pressure washer can fail if it is not properly maintained. To check the pump, remove the cover and look for any signs of damage or wear. If the pump is damaged, it will need to be replaced.

5. Check the hoses:
The hoses on your pressure washer can become kinked or damaged, which can restrict the flow of water and cause the pressure washer to not work properly. To check the hoses, inspect them for any signs of damage or wear. If the hoses are damaged, they will need to be replaced.

6. Check the nozzle:
The nozzle on your pressure washer can become clogged, which can reduce the pressure of the water stream. To check the nozzle, remove it from the pressure washer and clean it with a hose.

7. Check the regulator:
The regulator on your pressure washer controls the pressure of the water stream. If the regulator is not set correctly, it can cause the pressure washer to not work properly. To check the regulator, adjust it until the pressure of the water stream is correct.

8. Check the electrical components:
The electrical components on your pressure washer can fail if they are not properly maintained. To check the electrical components, inspect them for any signs of damage or wear. If the electrical components are damaged, they will need to be replaced.

Fixing a sun joe electric pressure washer

Once you have identified the problem with your sun joe electric pressure washer, you can fix it by following the steps below:

1. Replace the power cord:
If the power cord is damaged, you will need to replace it with a new one.

2. Turn on the water supply:
Make sure that the water supply is turned on and that there is enough water pressure.

3. Clean the filter:
If the filter is clogged, you will need to clean it with a hose.

4. Replace the pump:
If the pump is damaged, you will need to replace it with a new one.

5. Replace the hoses:
If the hoses are damaged, you will need to replace them with new ones.

6. Clean the nozzle:
If the nozzle is clogged, you will need to clean it with a hose.

7. Adjust the regulator:
If the regulator is not set correctly, you will need to adjust it until the pressure of the water stream is correct.

8. Replace the electrical components:
If the electrical components are damaged, you will need to replace them with new ones.

Preventing problems with your sun joe electric pressure washer

You can prevent problems with your sun joe electric pressure washer by following these tips:

Always use the pressure washer in accordance with the manufacturer’s instructions:

Inspect the pressure washer regularly for any signs of damage or wear:

Clean the pressure washer regularly to prevent the build-up of dirt and debris:

Store the pressure washer in a cool, dry place when not in use:

By following these tips, you can help to extend the life of your sun joe electric pressure washer and prevent problems from occurring.

FAQs: Sun Joe Electric Pressure Washer Not Working

Why is my Sun Joe electric pressure washer not working?

There are a few possible reasons why your Sun Joe electric pressure washer may not be working. Here are some of the most common causes and solutions:

The power cord is not plugged in properly: Make sure that the power cord is plugged into an outlet that is turned on and that the plug is securely inserted into the outlet.

The pressure washer is not turned on: Check to make sure that the power switch is turned to the On position.

The pressure washer is out of water: Make sure that the water tank is filled with water.

The water filter is clogged: Clean or replace the water filter if it is clogged.

The pressure washer pump is not working properly: If the pressure washer pump is not working properly, you may need to have it repaired or replaced.

How do I troubleshoot my Sun Joe electric pressure washer?

If your Sun Joe electric pressure washer is not working, you can troubleshoot the problem by following these steps:

1. Check the power cord: Make sure that the power cord is plugged into an outlet that is turned on and that the plug is securely inserted into the outlet.
2. Turn on the pressure washer: Check to make sure that the power switch is turned to the On position.
3. Check the water tank: Make sure that the water tank is filled with water.
4. Clean or replace the water filter: If the water filter is clogged, clean or replace it.
5. Test the pressure washer pump: To test the pressure washer pump, turn on the pressure washer and hold the trigger. If you do not hear a whining noise or feel any pressure, the pump may be broken.

How do I clean my Sun Joe electric pressure washer?

To clean your Sun Joe electric pressure washer, follow these steps:

1. Turn off the pressure washer and unplug it from the outlet:
2. Empty the water tank:
3. Remove the spray gun from the pressure washer:
4. Clean the spray gun with warm, soapy water:
5. Rinse the spray gun with clean water:
6. Dry the spray gun with a towel:
7. Clean the water filter:
8. Clean the pressure washer exterior with a damp cloth:
9. Reassemble the pressure washer:

How do I store my Sun Joe electric pressure washer?

To store your Sun Joe electric pressure washer, follow these steps:

1. Turn off the pressure washer and unplug it from the outlet:
2. Empty the water tank:
3. Remove the spray gun from the pressure washer:
4. Clean the spray gun with warm, soapy water:
5. Rinse the spray gun with clean water:
6. Dry the spray gun with a towel:
7. Clean the water filter:
8. Clean the pressure washer exterior with a damp cloth:
9. Store the pressure washer in a cool, dry place:

What are the benefits of using a Sun Joe electric pressure washer?

There are many benefits to using a Sun Joe electric pressure washer, including:

Powerful cleaning: Sun Joe electric pressure washers are powerful enough to clean a variety of surfaces, including cars, decks, patios, and driveways.

Easy to use: Sun Joe electric pressure washers are easy to operate, even for beginners.

Portable: Sun Joe electric pressure washers are lightweight and portable, making them easy to transport from one place to another.

Affordable: Sun Joe electric pressure washers are affordable, making them a great option for people on a budget.

What are the drawbacks of using a Sun Joe electric pressure washer?

There are a few drawbacks to using a Sun Joe electric pressure washer, including:

Short hose length: The hose on a Sun Joe electric pressure washer is relatively short, which can make it difficult to reach certain areas.

Small water tank: The water tank on a Sun Joe electric pressure washer is relatively small, which means that you may need to refill it frequently.

Less powerful than gas-powered pressure washers: Sun Joe electric pressure washers are less powerful than gas-powered pressure washers, so they may

You May Like to Read: Sun Joe Pressure Washer Detergent Not Working