Sun Joe Pressure Washer Detergent Not Working [How To Fix]

A Troubleshooting Guide

If your Sun Joe pressure washer detergent isn’t working, you’re not alone. This is a common problem that can be caused by a number of factors. In this guide, we’ll walk you through the steps to troubleshoot the issue and get your pressure washer up and running again.

We’ll start by discussing the different reasons why your detergent might not be working, and then we’ll provide specific steps to fix each problem. By the end of this guide, you’ll be able to diagnose and fix the issue so you can get back to cleaning your home and property.

Most Common Reasons Of Sun Joe Pressure Washer Detergent Not Working

Most Common Reasons Of Sun Joe Pressure Washer Detergent Not Working

Incorrect Detergent Type

The most common reason for Sun Joe pressure washer detergent not working is using the wrong type of detergent. Sun Joe pressure washers are designed to use detergents that are specifically formulated for pressure washers. Detergents that are not specifically formulated for pressure washers can damage the pressure washer or cause the detergent to not work properly.

Incorrect Detergent Concentration

Another common reason for Sun Joe pressure washer detergent not working is using the wrong concentration of detergent. The detergent concentration should be between 0.5% and 1%. If the concentration is too low, the detergent will not be effective. If the concentration is too high, the detergent can damage the pressure washer.

Insufficient Detergent

Using too little detergent can also prevent the detergent from working properly. The amount of detergent you use will depend on the size of the surface you are cleaning. For general cleaning, you will need to use about 1 gallon of detergent per 1,000 square feet of surface area.

Incorrect Water Pressure

The water pressure from your pressure washer also plays a role in how well the detergent works. The water pressure should be between 1,500 and 2,000 psi. If the water pressure is too low, the detergent will not be able to penetrate the surface of the dirt or grime. If the water pressure is too high, the detergent can be sprayed away before it has a chance to work.

Incorrect Spray Pattern

The spray pattern you use can also affect how well the detergent works. You should use a wide spray pattern when applying the detergent and a narrow spray pattern when rinsing the detergent off.

Incorrect Cleaning Technique

The way you clean the surface can also affect how well the detergent works. You should start by spraying the detergent onto the surface and then scrubbing it with a brush. You should then rinse the surface with a high-pressure stream of water.

How to Troubleshoot and Fix: Sun Joe Pressure Washer Detergent Not Working

Your Sun Joe pressure washer is a powerful tool that can help you clean your home, car, and other outdoor surfaces. But what happens when the detergent isn’t working properly? This can be a frustrating problem, but it’s usually easy to fix.

In this article, we’ll walk you through the steps to troubleshoot and fix a Sun Joe pressure washer that’s not dispensing detergent. We’ll also provide some tips on how to prevent this problem from happening in the future.

Troubleshooting Steps

If your Sun Joe pressure washer isn’t dispensing detergent, the first thing you need to do is check the detergent reservoir. Make sure that the reservoir is filled with detergent and that the lid is securely closed.

If the reservoir is full and the lid is closed, the next step is to check the detergent pump. The detergent pump is located on the side of the pressure washer. It’s a small, black plastic cylinder with a hose attached to it.

To check the detergent pump, turn on the pressure washer and listen for the pump to start. You should hear a faint whirring sound. If you don’t hear the pump running, it may be clogged or broken.

If the detergent pump is clogged, you can try to clear it by disconnecting the hose from the pump and flushing it with water. If the pump is broken, you’ll need to replace it.

Once you’ve checked the detergent reservoir and the detergent pump, you can try to use the pressure washer again. If the detergent is still not dispensing, you may need to contact Sun Joe customer support for assistance.

Preventative Tips

To prevent the detergent from not working properly, here are a few tips:

Always use the correct type of detergent for your pressure washer.
Make sure that the detergent reservoir is filled to the correct level.
Close the lid of the detergent reservoir tightly after each use.
Avoid using detergent that is too thick or too thin.
Clean the detergent pump regularly to prevent it from becoming clogged.

By following these tips, you can help to ensure that your Sun Joe pressure washer always dispenses detergent properly.

Conclusion

If your Sun Joe pressure washer isn’t dispensing detergent, the troubleshooting steps in this article should help you fix the problem. If you’re still having trouble, you can contact Sun Joe customer support for assistance.

FAQs: Sun Joe Pressure Washer Detergent Not Working

Why isn’t my Sun Joe pressure washer detergent working?

There are a few possible reasons why your Sun Joe pressure washer detergent might not be working.

You’re not using the right detergent: Sun Joe pressure washers require a specific type of detergent that is designed for use with pressure washers. If you’re using the wrong type of detergent, it won’t dissolve properly and won’t be able to clean your surfaces effectively.

You’re not using enough detergent: The amount of detergent you use is important. If you don’t use enough detergent, it won’t be able to clean your surfaces effectively.

You’re not using the detergent correctly: You need to make sure that you’re using the detergent correctly. This means spraying it on your surfaces before you start cleaning, and then rinsing it off afterwards.

Your pressure washer is not working properly: If your pressure washer is not working properly, it won’t be able to generate enough pressure to dissolve the detergent and clean your surfaces effectively.

How do I fix my Sun Joe pressure washer detergent not working?

If your Sun Joe pressure washer detergent is not working, you can try the following troubleshooting steps:

Check the type of detergent you’re using: Make sure that you’re using a detergent that is specifically designed for use with pressure washers.

Check the amount of detergent you’re using: Make sure that you’re using enough detergent.

Check the way you’re using the detergent: Make sure that you’re spraying the detergent on your surfaces before you start cleaning, and then rinsing it off afterwards.

Check your pressure washer: Make sure that your pressure washer is working properly.

If you’ve tried all of these troubleshooting steps and your pressure washer detergent is still not working, you may need to contact the manufacturer for assistance.

What kind of detergent do I use for my Sun Joe pressure washer?

Sun Joe pressure washers require a specific type of detergent that is designed for use with pressure washers. This type of detergent is typically made with a mild surfactant, which helps to dissolve dirt and grime, and a corrosion inhibitor, which helps to protect your pressure washer from damage.

Some of the most popular detergents for Sun Joe pressure washers include:

Sun Joe Pressure Washer Detergent
Simple Green Pressure Washer Detergent
Meguiar’s Pressure Washer Detergent
Mr. Clean Pressure Washer Detergent
Formula 409 Pressure Washer Detergent

How much detergent do I use for my Sun Joe pressure washer?

The amount of detergent you use for your Sun Joe pressure washer will depend on the size of the surface you’re cleaning. For most applications, you’ll need to use about 1 ounce of detergent per gallon of water.

However, you may need to use more or less detergent depending on the type of surface you’re cleaning. For example, you may need to use more detergent if you’re cleaning a heavily soiled surface, and you may need to use less detergent if you’re cleaning a delicate surface.

How do I use detergent with my Sun Joe pressure washer?

To use detergent with your Sun Joe pressure washer, follow these steps:

1. Fill the detergent reservoir with the desired amount of detergent.
2. Turn on the pressure washer and allow it to warm up for a few minutes.
3. Spray the detergent onto the surface you’re cleaning.
4. Turn off the pressure washer and allow the detergent to sit for a few minutes.
5. Rinse the surface with clean water.

You can also use a pressure washer detergent injector to automatically add detergent to the water stream as you’re cleaning. This can be a convenient way to apply detergent, but it’s important to make sure that you’re using the correct type of detergent for your pressure washer.

What are the benefits of using detergent with my Sun Joe pressure washer?

There are several benefits to using detergent with your Sun Joe pressure washer, including:

Improved cleaning performance: Detergent helps to dissolve dirt and grime, so you can clean your surfaces more effectively.

Reduced wear and tear on your pressure washer: Detergent helps to protect your pressure washer from damage by preventing corrosion.

Increased safety: Detergent helps to reduce the risk of injury by preventing slips and falls.

You May Like to Read: Sun Joe Pressure Washer Soap Dispenser Not Working