Sun Joe Pressure Washer Not Working: [Proven Fixes!]
As a Pressure Washer Repair Technician, I have seen my fair share of Sun Joe pressure washers that are not working. I know how frustrating it can be when your pressure washer won’t start or doesn’t produce enough pressure. Not only is it inconvenient, but it can also be dangerous. That’s why I’ve put together this troubleshooting guide to help you quickly diagnose and resolve the issue.
In this guide, I will cover the most common causes of Sun Joe pressure washer problems, as well as the steps you can take to fix them. I’ll also provide tips on how to prevent future problems. So if your Sun Joe pressure washer is not working, read on for help!
Most Common Reasons Sun Joe Pressure Washer Not Working
No Power
Cause:
The power cord is not plugged in or is not plugged in all the way.
Solution:
Make sure that the power cord is plugged in securely to both the pressure washer and the outlet.
Pressure Washer Won’t Start
Cause:
The pressure washer is not turned on.
Solution:
Turn on the pressure washer by pressing the power button.
Cause:
The pressure washer is not primed.
Solution:
Prime the pressure washer by following the manufacturer’s instructions.
Cause:
The pressure washer is out of gas.
Solution:
Add gas to the pressure washer.
Cause:
The pressure washer is overheating.
Solution:
Allow the pressure washer to cool down before using it again.
Pressure Washer Leaking
Cause:
The pressure washer is not properly assembled.
Solution:
Reassemble the pressure washer according to the manufacturer’s instructions.
Cause:
The pressure washer’s seals are damaged.
Solution:
Replace the pressure washer’s seals.
Cause:
The pressure washer’s hose is damaged.
Solution:
Replace the pressure washer’s hose.
Pressure Washer Won’t Spray
Cause:
The pressure washer’s nozzle is clogged.
Solution:
Clean the pressure washer’s nozzle.
Cause:
The pressure washer’s pump is damaged.
Solution:
Repair or replace the pressure washer’s pump.
How to Troubleshoot: Sun Joe Pressure Washer Not Working
Is Your Sun Joe Pressure Washer Not Working?
Your Sun Joe pressure washer is a powerful tool that can make quick work of cleaning your home, car, and outdoor furniture. But what happens when it suddenly stops working? Don’t panic! There are a few simple things you can check to troubleshoot the problem and get your pressure washer up and running again.
1. Check the Power
The first thing you should do is check to make sure that your pressure washer is plugged in and turned on. If it’s not, plug it in and turn it on. If it still doesn’t work, check the circuit breaker to make sure that it’s not tripped.
2. Check the Hose
Next, check the hose to make sure that it’s not kinked or damaged. If it is, replace the hose. You should also check the connections to make sure that they’re tight.
3. Check the Nozzle
If the hose and connections are fine, the next thing you should check is the nozzle. Make sure that it’s screwed on tightly and that it’s not clogged. If it’s clogged, you can try cleaning it with a wire brush.
4. Check the Pump
If the nozzle is clear and the hose and connections are tight, the next thing you should check is the pump. To do this, turn on the pressure washer and listen for the pump to start. If you don’t hear the pump running, it could be that the pump is seized or damaged. In this case, you’ll need to take the pressure washer to a qualified repair shop.
5. Check the Oil Level
If the pump is running, the next thing you should check is the oil level. To do this, remove the oil fill cap and check the oil level with the dipstick. The oil level should be between the full and add marks on the dipstick. If the oil level is low, add oil to the reservoir until it reaches the full mark.
6. Check the Air Filter
If the oil level is fine, the next thing you should check is the air filter. To do this, remove the air filter cover and inspect the filter. If the filter is dirty, replace it with a new one.
7. Check the Water Filter
If the air filter is clean, the next thing you should check is the water filter. To do this, remove the water filter housing and inspect the filter. If the filter is dirty, replace it with a new one.
8. Check the Throttle
If the pressure washer is still not working, the next thing you should check is the throttle. To do this, turn on the pressure washer and adjust the throttle. If the pressure washer is not producing any pressure, the throttle may be stuck. In this case, you’ll need to take the pressure washer to a qualified repair shop.
9. Check the Pressure Switch
If the pressure washer is producing pressure but not spraying water, the next thing you should check is the pressure switch. To do this, turn on the pressure washer and press the pressure switch. If the pressure switch is not working, you’ll need to replace it.
10. Take the Pressure Washer to a Qualified Repair Shop
If you’ve checked all of the above and your pressure washer is still not working, it’s time to take it to a qualified repair shop. A qualified repair shop will be able to diagnose the problem and repair your pressure washer.
Conclusion
By following these troubleshooting tips, you can quickly and easily identify and fix the problem with your Sun Joe pressure washer. If you’re unable to fix the problem yourself, take the pressure washer to a qualified repair shop.
Also Read: Sun Joe Pressure Washer Soap Not Working