Sun Joe Pressure Washer Soap Dispenser Not Working [How To Fix It]

Troubleshooting Guide

Your Sun Joe pressure washer is a powerful tool that can make quick work of cleaning your home, car, and other outdoor surfaces. But when the soap dispenser isn’t working, it can be a major inconvenience.

This guide will help you troubleshoot the issue and get your soap dispenser up and running again in no time. So whether you’re a seasoned pro or a first-time user, read on for all the information you need to know.

Most Common Reasons Of Sun Joe Pressure Washer Soap Dispenser Not Working

Most Common Reasons Of Sun Joe Pressure Washer Soap Dispenser Not Working

1. Blocked Soap Nozzle

The most common reason for a Sun Joe pressure washer soap dispenser not working is a blocked soap nozzle. This can happen if the nozzle becomes clogged with soap residue or debris. To fix this, try cleaning the nozzle with a small brush or needle. If the nozzle is still blocked, you may need to replace it.

2. Low Soap Level

Another common reason for a Sun Joe pressure washer soap dispenser not working is a low soap level. If the soap reservoir is empty, the dispenser will not be able to pump soap. To fix this, simply add more soap to the reservoir.

3. Faulty Soap Dispenser

In some cases, the soap dispenser itself may be faulty. This can happen if the dispenser is damaged or if the seals are worn out. If you suspect that the soap dispenser is faulty, you should contact Sun Joe customer service for assistance.

4. Blocked Hose

The hose that connects the soap dispenser to the pressure washer can also become blocked. This can happen if the hose becomes clogged with soap residue or debris. To fix this, try cleaning the hose with a small brush or needle. If the hose is still blocked, you may need to replace it.

5. Wrong Type of Soap

Some Sun Joe pressure washers require a specific type of soap. If you are using the wrong type of soap, it may not be compatible with the pressure washer and may not work properly. To fix this, make sure that you are using the correct type of soap for your pressure washer.

How to Troubleshoot and Fix a Sun Joe Pressure Washer Soap Dispenser

Symptoms of a Sun Joe Pressure Washer Soap Dispenser Not Working

There are a few different symptoms that can indicate that your Sun Joe pressure washer soap dispenser is not working properly. These include:

The soap dispenser does not dispense any soap when you turn on the pressure washer.
The soap dispenser dispenses soap slowly or intermittently.
The soap dispenser leaks soap.
The soap dispenser makes a loud noise when it is dispensing soap.

Troubleshooting a Sun Joe Pressure Washer Soap Dispenser

If your Sun Joe pressure washer soap dispenser is not working properly, you can try troubleshooting the problem yourself. Here are a few things to check:

Check the soap reservoir:
Make sure that the soap reservoir is filled with soap and that the soap is not clogged.

Check the soap dispenser nozzle:
The soap dispenser nozzle may be clogged with soap or debris. Try cleaning the nozzle with a small brush or needle.

Check the soap dispenser hose:
The soap dispenser hose may be kinked or damaged. If the hose is damaged, you will need to replace it.

Check the soap dispenser valve:
The soap dispenser valve may be stuck or damaged. If the valve is damaged, you will need to replace it.

Fixing a Sun Joe Pressure Washer Soap Dispenser

If you have checked all of the above and your Sun Joe pressure washer soap dispenser is still not working, you may need to take it to a qualified technician for repairs.

Preventing Sun Joe Pressure Washer Soap Dispenser Problems

You can help prevent problems with your Sun Joe pressure washer soap dispenser by following these tips:

Keep the soap reservoir filled with soap:
This will help to prevent the soap from becoming clogged.

Clean the soap dispenser nozzle regularly:
This will help to prevent the nozzle from becoming clogged.

Inspect the soap dispenser hose regularly:
If the hose is kinked or damaged, replace it immediately.

Use only high-quality soap in your Sun Joe pressure washer:
This will help to prevent the soap dispenser from becoming clogged.

By following these tips, you can help to keep your Sun Joe pressure washer soap dispenser working properly for years to come.

FAQs: Sun Joe Pressure Washer Soap Dispenser Not Working

Why is my Sun Joe pressure washer soap dispenser not working?

There are a few possible reasons why your Sun Joe pressure washer soap dispenser may not be working. Here are some of the most common causes and solutions:

The soap dispenser is clogged: This is the most common cause of a soap dispenser not working. To fix this, try cleaning the dispenser with a degreaser or a vinegar and water solution.

The soap dispenser is not getting enough water: If the soap dispenser is not getting enough water, it will not be able to dispense soap properly. To fix this, make sure that the water hose is connected to the pressure washer and that the water pressure is turned on.

The soap dispenser is not turned on: Make sure that the soap dispenser is turned on. This is usually a switch located on the side of the pressure washer.

The soap dispenser is not compatible with your pressure washer: Make sure that the soap dispenser is compatible with your pressure washer. Some soap dispensers are only compatible with certain models of pressure washers.

How do I clean the soap dispenser on my Sun Joe pressure washer?

To clean the soap dispenser on your Sun Joe pressure washer, follow these steps:

1. Turn off the pressure washer and disconnect the water hose.
2. Remove the soap dispenser from the pressure washer.
3. Fill a bucket with a degreaser or a vinegar and water solution.
4. Soak the soap dispenser in the solution for several minutes.
5. Use a brush to scrub the inside of the soap dispenser.
6. Rinse the soap dispenser thoroughly with water.
7. Reattach the soap dispenser to the pressure washer.

How do I make sure that my Sun Joe pressure washer soap dispenser is getting enough water?

To make sure that your Sun Joe pressure washer soap dispenser is getting enough water, follow these steps:

1. Check the water hose to make sure that it is connected to the pressure washer and that there are no kinks or obstructions.
2. Turn on the water to the pressure washer and make sure that the water pressure is turned on.
3. Turn on the pressure washer and check to see if the soap dispenser is dispensing soap.
4. If the soap dispenser is not dispensing soap, adjust the water pressure until the soap dispenser starts to dispense soap.

How do I turn on the soap dispenser on my Sun Joe pressure washer?

To turn on the soap dispenser on your Sun Joe pressure washer, follow these steps:

1. Find the soap dispenser switch on the side of the pressure washer.
2. Slide the switch to the On position.
3. The soap dispenser will now be turned on.

What kind of soap should I use in my Sun Joe pressure washer soap dispenser?

You can use any type of soap in your Sun Joe pressure washer soap dispenser, as long as it is designed for use with pressure washers. However, some soaps are better suited for pressure washers than others. For example, some soaps are designed to clean specific surfaces, such as concrete or siding. Others are designed to remove tough stains or grease.

When choosing a soap for your pressure washer, it is important to consider the type of surface you will be cleaning and the type of stains or grease you need to remove. You can also consult the owner’s manual for your pressure washer for specific recommendations on which soaps to use.

You May Like to Read: Sun Joe Pressure Washer Troubleshooting Soap Not Working