Sun Joe Pressure Washer Stops Soap Dispenser Not Working [Proven Ways To Fix]

Sun Joe Pressure Washer Soap Dispenser Not Working A Troubleshooting Guide

Do you have a Sun Joe pressure washer that’s not dispensing soap You’re not alone. This is a common problem, but it’s one that’s easy to fix. In this guide, I’ll walk you through the steps to troubleshoot the issue and get your soap dispenser working again.

I know how frustrating it can be when your pressure washer isn’t working properly. That’s why I’m committed to providing you with the information you need to get your machine up and running again as quickly as possible. So if you’re ready to get started, let’s do this!

Reasons Why Sun Joe Pressure Washer Stops Soap Dispenser Not Working

Blocked Soap Nozzle

The soap nozzle is clogged with soap or debris, preventing the soap from flowing out.

Clogged Hose

The hose is clogged with soap or debris, preventing the soap from flowing through the hose to the nozzle.

Low Pressure

The pressure washer is not producing enough pressure to push the soap through the hose and nozzle.

Faulty Soap Dispenser

The soap dispenser is faulty and is not dispensing soap properly.

How to Troubleshoot And Fix: sun joe pressure washer stops soap dispenser not working

Symptoms

There are a few different symptoms that you may experience if your Sun Joe pressure washer’s soap dispenser is not working properly. These include:

The soap dispenser not dispensing any soap at all
The soap dispenser dispensing soap slowly or intermittently
The soap dispenser dispensing soap in a weak or inconsistent stream

Causes

There are a few different things that could cause your Sun Joe pressure washer’s soap dispenser to stop working properly. These include:

A clogged soap dispenser:
If the soap dispenser is clogged, it will not be able to dispense soap properly. This can be caused by a build-up of soap residue, dirt, or debris.

A faulty soap dispenser valve:
The soap dispenser valve is responsible for controlling the flow of soap from the dispenser. If the valve is faulty, it may not be able to open properly, which will prevent the soap from dispensing.

A faulty pressure washer pump:
The pressure washer pump is responsible for generating the pressure that forces the soap out of the dispenser. If the pump is faulty, it may not be able to generate enough pressure, which will also prevent the soap from dispensing properly.

Troubleshooting

To troubleshoot the problem with your Sun Joe pressure washer’s soap dispenser, you will need to first identify the cause of the problem. Here are a few steps to help you troubleshoot the problem:

1. Check the soap dispenser for clogs:
Remove the soap dispenser from the pressure washer and inspect it for any clogs. If you see any clogs, try to remove them using a toothpick or other small, sharp object.

2. Check the soap dispenser valve:
Inspect the soap dispenser valve for any damage or wear. If the valve is damaged, you will need to replace it.3. Check the pressure washer pump:
Check the pressure washer pump for any damage or wear. If the pump is damaged, you will need to replace it.

How to Fix a Clogged Soap Dispenser

If the soap dispenser is clogged, you can try to fix it by following these steps:

1. Remove the soap dispenser from the pressure washer.
2. Fill a bucket with warm water and dish soap.
3. Soak the soap dispenser in the bucket of warm water and dish soap for a few minutes.
4. Use a toothpick or other small, sharp object to gently loosen any clogs.
5. Rinse the soap dispenser thoroughly with warm water.
6. Reattach the soap dispenser to the pressure washer.

How to Fix a Faulty Soap Dispenser Valve

If the soap dispenser valve is faulty, you will need to replace it. To do this, follow these steps:

1. Remove the soap dispenser from the pressure washer.
2. Remove the old soap dispenser valve by unscrewing it.
3. Install the new soap dispenser valve by screwing it into place.
4. Reattach the soap dispenser to the pressure washer.

How to Fix a Faulty Pressure Washer Pump

If the pressure washer pump is faulty, you will need to replace it. To do this, follow these steps:

1. Remove the pressure washer pump from the pressure washer.
2. Remove the old pressure washer pump by unscrewing it.
3. Install the new pressure washer pump by screwing it into place.
4. Reattach the pressure washer pump to the pressure washer.

Conclusion

By following these troubleshooting steps, you should be able to fix the problem with your Sun Joe pressure washer’s soap dispenser. If you are unable to fix the problem yourself, you can always contact a qualified technician for help.

Also Read: Task Force Pressure Washer Not Working

FAQs

Why is my Sun Joe pressure washer soap dispenser not working?

There are a few possible reasons why your Sun Joe pressure washer soap dispenser might not be working. Here are some of the most common causes and solutions:

The soap dispenser is clogged: This is the most common cause of a soap dispenser not working. To fix this, try cleaning the dispenser with a degreaser or vinegar.

The soap dispenser is not getting enough water: Make sure that the water pressure is turned up high enough and that the hose is connected properly.

The soap dispenser is not turned on: Check to make sure that the soap dispenser is turned on.

The soap dispenser is not compatible with your pressure washer: Make sure that the soap dispenser is compatible with your pressure washer’s model and pressure.

How do I clean the soap dispenser on my Sun Joe pressure washer?

To clean the soap dispenser on your Sun Joe pressure washer, follow these steps:

1. Turn off the pressure washer and disconnect the hose from the gun.
2. Remove the soap dispenser from the pressure washer.
3. Fill a bucket with warm water and degreaser.
4. Soak the soap dispenser in the degreaser solution for a few minutes.
5. Use a brush to scrub the inside of the soap dispenser.
6. Rinse the soap dispenser thoroughly with water.
7. Dry the soap dispenser with a towel.
8. Reattach the soap dispenser to the pressure washer.

How do I turn on the soap dispenser on my Sun Joe pressure washer?

To turn on the soap dispenser on your Sun Joe pressure washer, follow these steps:

1. Turn on the pressure washer.
2. Press the soap dispenser button on the gun.
3. The soap will start to flow out of the dispenser.

How do I adjust the soap flow on my Sun Joe pressure washer?

To adjust the soap flow on your Sun Joe pressure washer, follow these steps:

1. Turn off the pressure washer.
2. Remove the soap dispenser from the gun.
3. Use a screwdriver to adjust the soap flow valve.
4. Reattach the soap dispenser to the gun.
5. Turn on the pressure washer and test the soap flow.

What type of soap should I use in my Sun Joe pressure washer?

You can use any type of soap in your Sun Joe pressure washer, but it is best to use a soap that is specifically designed for pressure washers. This type of soap will be more effective at cleaning your surfaces and will not damage your pressure washer.

Here are a few tips for choosing the right soap for your pressure washer:

Use a soap that is designed for pressure washers.
Use a soap that is compatible with the type of surface you are cleaning.
Use a soap that is not too thick or too thin.
Use a soap that does not contain harsh chemicals.

Here are a few popular brands of soap that are specifically designed for pressure washers:

Sun Joe
Karcher
Briggs & Stratton
Generac
WEN