Sun Joe Pressure Washer Troubleshooting Soap Not Working [Fix It For Good]

Your Sun Joe pressure washer is a powerful tool that can make quick work of cleaning your home and yard. But what happens when the soap doesn’t come out This is a common problem that can be frustrating and time-consuming to fix.

In this guide, I’ll walk you through the steps to troubleshoot the issue and get your pressure washer soaping up again in no time. So whether you’re a seasoned pro or a first-time user, read on for all the information you need to know.

Most Common Reasons Of Sun Joe Pressure Washer Troubleshooting Soap Not Working

Most Common Reasons Of Sun Joe Pressure Washer Troubleshooting Soap Not Working

Incorrect Soap Type

The most common reason for soap not working in a Sun Joe pressure washer is using the wrong type of soap. Sun Joe pressure washers are designed to use a specific type of soap, which is typically a concentrated detergent. If you use a different type of soap, such as a dish soap or laundry detergent, it may not dissolve properly and will not be effective at cleaning.

Incorrect Soap Concentration

Another common reason for soap not working is using the wrong concentration of soap. The recommended concentration of soap for a Sun Joe pressure washer is typically 1 ounce of soap per gallon of water. If you use too much soap, it can clog the nozzle and prevent the soap from being sprayed out. If you use too little soap, it may not be effective at cleaning.

Nozzle Clogged

If the nozzle on your Sun Joe pressure washer is clogged, it can prevent the soap from being sprayed out. To check if the nozzle is clogged, remove the nozzle from the gun and look inside. If you see any debris or soap buildup, use a small brush to clean it out.

Low Pressure

If the pressure of your Sun Joe pressure washer is too low, it may not be able to spray the soap out of the nozzle. To check the pressure, turn on the pressure washer and attach a pressure gauge to the outlet. The pressure should be between 1500 and 2000 psi. If the pressure is too low, you may need to clean the filter or replace the pump.

Faulty Pump

If the pump on your Sun Joe pressure washer is faulty, it may not be able to generate enough pressure to spray the soap out of the nozzle. To check if the pump is faulty, turn on the pressure washer and listen for any unusual noises. If you hear any grinding or whining noises, the pump may be faulty and will need to be replaced.

How to Troubleshoot And Fix: Sun Joe Pressure Washer Troubleshooting Soap Not Working

Problem: Soap Not Coming Out of the Wand

If the soap is not coming out of the wand, there are a few things you can check:

Make sure that the soap dispenser is turned on:
The soap dispenser is located on the back of the pressure washer. It is a small, black knob that you can turn to the on position.

Check the soap reservoir:
Make sure that the soap reservoir is filled with soap. The soap reservoir is located on the top of the pressure washer. It is a clear, plastic tank.

Check the hose:
Make sure that the hose is not kinked or blocked. The hose is the black, flexible tube that connects the pressure washer to the wand.

Check the nozzle:
Make sure that the nozzle is not clogged. The nozzle is the small, metal tip that screws onto the end of the wand.

If you have checked all of these things and the soap is still not coming out of the wand, you may need to replace the soap dispenser.

Problem: Soap Dispenser Not Working

If the soap dispenser is not working, there are a few things you can check:

Make sure that the soap dispenser is turned on:
The soap dispenser is located on the back of the pressure washer. It is a small, black knob that you can turn to the on position.

Check the power cord:
Make sure that the power cord is plugged into an outlet and that the outlet is working.

Check the fuse:
The fuse is located on the back of the pressure washer. It is a small, cylindrical piece of metal. If the fuse is blown, you will need to replace it.

If you have checked all of these things and the soap dispenser is still not working, you may need to replace the soap dispenser.

Solution: How to Fix a Clogged Soap Nozzle

If the soap nozzle is clogged, you can try to fix it by following these steps:

1. Turn off the pressure washer and disconnect the hose from the wand.
2. Remove the nozzle from the wand.
3. Soak the nozzle in a cup of hot, soapy water for a few minutes.
4. Use a pipe cleaner or a small brush to clean out the nozzle.
5. Rinse the nozzle thoroughly with water.
6. Reattach the nozzle to the wand.
7. Connect the hose to the wand and turn on the pressure washer.

If the soap nozzle is still clogged, you may need to replace it.

Preventative Maintenance Tips

To prevent soap problems, you can follow these tips:

Always use the correct type of soap for your pressure washer:
Some soaps are designed for specific types of pressure washers. Using the wrong type of soap can damage your pressure washer.

Never overfill the soap reservoir:
Overfilling the soap reservoir can cause the soap to overflow and clog the hose or nozzle.

Clean the soap dispenser regularly:
A clogged soap dispenser can prevent the soap from coming out of the wand.

Replace the soap nozzle regularly:
A worn-out soap nozzle can clog easily.

By following these tips, you can help to prevent soap problems and keep your pressure washer running smoothly.

FAQs: Sun Joe Pressure Washer Troubleshooting Soap Not Working

Why isn’t my Sun Joe pressure washer soap dispenser working?

There are a few possible reasons why your Sun Joe pressure washer soap dispenser might not be working.

The soap container is empty: Make sure that the soap container is filled with soap and that the lid is tightly closed.

The soap container is not inserted correctly: Make sure that the soap container is inserted all the way into the pressure washer.

The soap nozzle is clogged: Clean the soap nozzle with a toothpick or other small, pointed object.

The soap pressure is too low: Increase the soap pressure by turning the soap pressure adjustment knob on the pressure washer.

The soap pump is not working properly: If the soap pump is not working properly, you may need to replace it.

How do I troubleshoot my Sun Joe pressure washer soap dispenser?

To troubleshoot your Sun Joe pressure washer soap dispenser, follow these steps:

1. Check the soap container to make sure that it is filled with soap and that the lid is tightly closed.
2. Make sure that the soap container is inserted all the way into the pressure washer.
3. Clean the soap nozzle with a toothpick or other small, pointed object.
4. Increase the soap pressure by turning the soap pressure adjustment knob on the pressure washer.
5. If the soap pump is not working properly, you may need to replace it.

How do I change the soap type in my Sun Joe pressure washer?

To change the soap type in your Sun Joe pressure washer, follow these steps:

1. Turn off the pressure washer and disconnect it from the power source.
2. Remove the soap container from the pressure washer.
3. Remove the old soap from the container.
4. Add the new soap to the container.
5. Reinsert the soap container into the pressure washer.
6. Turn on the pressure washer and test the soap.

How do I clean the soap nozzle on my Sun Joe pressure washer?

To clean the soap nozzle on your Sun Joe pressure washer, follow these steps:

1. Turn off the pressure washer and disconnect it from the power source.
2. Remove the soap nozzle from the pressure washer.
3. Soak the soap nozzle in a solution of warm water and dish soap.
4. Use a toothpick or other small, pointed object to clean out any debris from the nozzle.
5. Rinse the soap nozzle thoroughly with clean water.
6. Reinsert the soap nozzle into the pressure washer.

What should I do if my Sun Joe pressure washer soap dispenser is still not working?

If your Sun Joe pressure washer soap dispenser is still not working after troubleshooting, you may need to contact Sun Joe customer support for assistance.

You May Like to Read: Sunjoe Pressure Washer Soap Dispenser Not Working