Sunjoe Pressure Washer Not Working [How To Troubleshoot]

Do you own a SunJoe pressure washer that’s not working

If so, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s a good chance you can fix it yourself with a little troubleshooting.

In this guide, I’ll walk you through the steps to troubleshoot a SunJoe pressure washer that’s not working. I’ll cover everything from simple fixes like checking the power cord to more complex repairs like replacing the pump. So whether you’re a DIYer or you’re not comfortable working with tools, I’ll help you get your SunJoe pressure washer up and running again in no time.

Most Common Reasons Of Sunjoe Pressure Washer Not Working

Most Common Reasons Of Sunjoe Pressure Washer Not Working

No Water Coming Out

Nozzle clogged:
The most common reason for no water coming out of a Sunjoe pressure washer is a clogged nozzle. To fix this, remove the nozzle and clean it with a wire brush.

Water shutoff valve closed:
Make sure the water shutoff valve on the pressure washer is open.

Pressure washer hose kinked:
Check the pressure washer hose for kinks. If the hose is kinked, straighten it out.

Pressure washer pump not working:
If the pressure washer pump is not working, it will need to be repaired or replaced.

Water Leaking

O-rings worn out:
The O-rings on the pressure washer can wear out over time and cause leaks. To fix this, replace the O-rings.

Pressure washer hose damaged:
A damaged pressure washer hose can also cause leaks. To fix this, replace the hose.

Pressure washer pump leaking:
If the pressure washer pump is leaking, it will need to be repaired or replaced.

Pressure Washer Won’t Start

Engine not getting fuel:
Make sure the fuel tank is full and that the fuel line is not kinked.

Spark plug not firing:
Check the spark plug and make sure it is clean and properly gapped.

Engine not getting spark:
Check the spark plug wire and make sure it is connected to the spark plug.

Engine flooded:
If the engine is flooded, it will need to be drained and restarted.

Pressure Washer Makes a Loud Noise

Pressure washer pump is damaged:
If the pressure washer pump is damaged, it will make a loud noise. The pump will need to be repaired or replaced.

Pressure washer hose is kinked:
A kinked pressure washer hose can also cause a loud noise. Straighten out the hose.

Pressure washer is not properly maintained:
If the pressure washer is not properly maintained, it can make a loud noise. Make sure to regularly clean and maintain the pressure washer.

How to Troubleshoot And Fix: sunjoe pressure washer not working

Symptoms of a sunjoe pressure washer not working

There are a few different symptoms that can indicate that your sunjoe pressure washer is not working properly. These include:

The pressure washer is not producing any water
The pressure washer is producing low pressure water
The pressure washer is making strange noises
The pressure washer is overheating
The pressure washer is leaking water

Troubleshooting a sunjoe pressure washer that is not working

If your sunjoe pressure washer is not working properly, you can try to troubleshoot the problem yourself. Here are a few steps to follow:

1. Check the water supply:
Make sure that the water supply to the pressure washer is turned on and that there is no blockage in the hose.

2. Check the pressure washer pump:
The pressure washer pump is located at the back of the unit. To check the pump, turn on the pressure washer and listen for a humming sound. If you do not hear a humming sound, the pump may be defective.3. Check the pressure washer hose:
The pressure washer hose is located at the front of the unit. To check the hose, look for any cracks or leaks. If you find a crack or leak, replace the hose.

4. Check the pressure washer nozzle:
The pressure washer nozzle is located at the end of the hose. To check the nozzle, remove it from the hose and look for any clogs. If you find a clog, clean the nozzle with a wire brush.

5. Check the pressure washer filter:
The pressure washer filter is located at the bottom of the unit. To check the filter, remove it from the unit and look for any dirt or debris. If you find dirt or debris, clean the filter with water.

Fixing a sunjoe pressure washer that is not working

If you have troubleshooted the problem and determined that the pressure washer is not working properly, you will need to fix the problem. Here are a few common repairs for sunjoe pressure washers:

Replace the pressure washer pump:
If the pressure washer pump is defective, you will need to replace it. To replace the pump, follow the instructions in the owner’s manual.

Replace the pressure washer hose:
If the pressure washer hose is cracked or leaking, you will need to replace it. To replace the hose, follow the instructions in the owner’s manual.

Replace the pressure washer nozzle:
If the pressure washer nozzle is clogged, you will need to replace it. To replace the nozzle, follow the instructions in the owner’s manual.

Replace the pressure washer filter:
If the pressure washer filter is dirty, you will need to replace it. To replace the filter, follow the instructions in the owner’s manual.

Preventing future problems with your sunjoe pressure washer

You can prevent future problems with your sunjoe pressure washer by following these tips:

Always use the correct type of water for your pressure washer:
Do not use salt water or water that contains chemicals.

Never overfill the pressure washer tank:
The pressure washer tank should be filled to the fill line.

Never operate the pressure washer without the safety guard in place:
The safety guard protects you from the high-pressure water stream.

Clean the pressure washer after each use:
Cleaning the pressure washer will help to prevent dirt and debris from clogging the pump and hose.

By following these tips, you can help to keep your sunjoe pressure washer in good working order and prevent future problems.

FAQs: SunJoe Pressure Washer Not Working

Why is my SunJoe pressure washer not working?

There are a few possible reasons why your SunJoe pressure washer may not be working. Here are some of the most common causes and solutions:

The pressure washer is not plugged in properly: Make sure that the power cord is plugged into an outlet and that the outlet is turned on.

The pressure washer is not turned on: Check the power switch to make sure that it is turned to the On position.

The pressure washer is out of water: Make sure that the water tank is filled with water.

The pressure washer is clogged: The pressure washer may be clogged with dirt or debris. Try cleaning the filter and nozzle.

The pressure washer is not producing enough pressure: The pressure washer may not be producing enough pressure if the pump is not working properly.

How do I fix a SunJoe pressure washer that is not working?

Once you have identified the cause of the problem, you can follow these steps to fix your SunJoe pressure washer:

If the pressure washer is not plugged in properly, plug it into an outlet and turn on the power switch:

If the pressure washer is not turned on, turn the power switch to the On position:

If the pressure washer is out of water, fill the water tank with water:

If the pressure washer is clogged, clean the filter and nozzle:

If the pressure washer is not producing enough pressure, check the pump and replace it if necessary:

What are the most common problems with SunJoe pressure washers?

The most common problems with SunJoe pressure washers include:

The pressure washer is not plugged in properly.
The pressure washer is not turned on.
The pressure washer is out of water.
The pressure washer is clogged.
The pressure washer is not producing enough pressure.

How can I prevent problems with my SunJoe pressure washer?

You can prevent problems with your SunJoe pressure washer by following these tips:

Always plug the pressure washer into an outlet and turn on the power switch before using it:

Make sure that the water tank is filled with water before using the pressure washer:

Clean the filter and nozzle regularly to prevent clogging:

Inspect the pump regularly for signs of wear and tear:

Replace the pump if it is damaged or worn out:

What should I do if my SunJoe pressure washer is still not working after I have tried to fix it?

If your SunJoe pressure washer is still not working after you have tried to fix it, you should contact SunJoe customer support for assistance. SunJoe customer support can be reached by phone at 1-800-597-9663 or by email at [email protected]

You May Like to Read: Titan Pressure Washer Detergent Not Working

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *