Sunjoe Pressure Washer Soap Dispenser Not Working [Fix It Now!]

Troubleshooting Guide

Your SunJoe pressure washer is a powerful tool that can make cleaning your home or yard a breeze. But when the soap dispenser stops working, it can be a major inconvenience. Not only does it make it more difficult to clean your surfaces, but it can also waste soap.

If you’re experiencing this issue, don’t worry—you’re not alone. In this troubleshooting guide, we’ll walk you through the steps to diagnose and fix the problem. So you can get back to cleaning your home or yard in no time.

Most Common Reasons Of Sunjoe Pressure Washer Soap Dispenser Not Working

Most Common Reasons Of Sunjoe Pressure Washer Soap Dispenser Not Working

1. Blocked Soap Nozzle

The most common reason for a Sunjoe pressure washer soap dispenser not working is a blocked soap nozzle. This can be caused by a build-up of soap residue or dirt. To fix this, remove the soap nozzle and clean it with a toothbrush and warm water.

2. Faulty Soap Pump

If the soap nozzle is clear but the soap dispenser is still not working, the soap pump may be faulty. To check this, turn on the pressure washer and listen for the soap pump running. If you don’t hear the pump running, it may be broken. You can try replacing the soap pump, or you can contact Sunjoe customer service for assistance.

3. Low Soap Level

If the soap dispenser is not working, it may be because the soap level is too low. To check the soap level, look at the soap reservoir. If the soap level is low, add more soap to the reservoir.

4. Wrong Type of Soap

Sunjoe pressure washers are designed to use a specific type of soap. If you use the wrong type of soap, it may not work properly in the soap dispenser. To avoid this, use only Sunjoe-approved soap in your pressure washer.

5. Misaligned Soap Nozzle

The soap nozzle on a Sunjoe pressure washer can become misaligned, which can prevent it from working properly. To check if the soap nozzle is misaligned, turn on the pressure washer and look at the soap nozzle. If the nozzle is not pointing in the same direction as the spray wand, it is misaligned. You can try realigning the soap nozzle, or you can contact Sunjoe customer service for assistance.

How to Troubleshoot And Fix: SunJoe Pressure Washer Soap Dispenser Not Working

Symptoms of a SunJoe Pressure Washer Soap Dispenser Not Working

There are a few different symptoms that you may experience if your SunJoe pressure washer soap dispenser is not working properly. These include:

The soap dispenser does not dispense any soap when you press the trigger.
The soap dispenser leaks soap when you are not using it.
The soap dispenser is difficult to operate.
The soap dispenser is making a strange noise.

Troubleshooting a SunJoe Pressure Washer Soap Dispenser

If you are experiencing any of the symptoms listed above, you can try troubleshooting the problem yourself before calling for professional help. Here are a few things you can check:

Make sure that the soap dispenser is turned on:
The soap dispenser may not be working if it is not turned on. Check the power switch on the soap dispenser to make sure that it is in the On position.

Check the soap reservoir:
Make sure that the soap reservoir is filled with soap. If the reservoir is empty, fill it up with soap and try again.

Clean the soap dispenser nozzle:
The soap dispenser nozzle may be clogged with soap residue. Try cleaning the nozzle with a toothpick or a small brush.

Replace the soap dispenser gasket:
The soap dispenser gasket may be worn out or damaged. If the gasket is damaged, replace it with a new one.

Fixing a SunJoe Pressure Washer Soap Dispenser

If you have tried troubleshooting the problem yourself and you are still unable to get the soap dispenser to work, you may need to call for professional help. A qualified technician will be able to diagnose the problem and fix it quickly and efficiently.

Preventing SunJoe Pressure Washer Soap Dispenser Problems

You can help prevent problems with your SunJoe pressure washer soap dispenser by following these tips:

Keep the soap dispenser clean:
Make sure to clean the soap dispenser regularly to prevent soap residue from building up and clogging the nozzle.

Use the correct type of soap:
Use a soap that is specifically designed for pressure washers. Do not use dish soap or laundry detergent, as these soaps can damage the soap dispenser.

Don’t overfill the soap reservoir:
Only fill the soap reservoir up to the fill line. Overfilling the reservoir can cause the soap to overflow and damage the soap dispenser.

By following these tips, you can help prevent problems with your SunJoe pressure washer soap dispenser and keep it working properly for years to come.

FAQs: SunJoe Pressure Washer Soap Dispenser Not Working

Why is my SunJoe pressure washer soap dispenser not working?

There are a few possible reasons why your SunJoe pressure washer soap dispenser might not be working. Here are a few of the most common causes:

The soap dispenser is clogged: If the soap dispenser is clogged, it won’t be able to dispense soap properly. To fix this, you can try cleaning the soap dispenser with a degreaser or a vinegar solution.

The soap dispenser is not getting enough water: If the soap dispenser is not getting enough water, it won’t be able to dispense soap properly. To fix this, you can try increasing the water pressure or adjusting the water flow rate.

The soap dispenser is not turned on: If the soap dispenser is not turned on, it won’t be able to dispense soap. To fix this, you can try turning on the soap dispenser.

The soap dispenser is not compatible with your pressure washer: If the soap dispenser is not compatible with your pressure washer, it won’t be able to dispense soap properly. To fix this, you can try using a different soap dispenser that is compatible with your pressure washer.

How do I clean the soap dispenser on my SunJoe pressure washer?

To clean the soap dispenser on your SunJoe pressure washer, you can follow these steps:

1. Turn off the pressure washer and disconnect the hose from the water source.
2. Remove the soap dispenser from the pressure washer.
3. Fill a bucket with a degreaser or a vinegar solution.
4. Soak the soap dispenser in the solution for a few minutes.
5. Use a brush to scrub the inside of the soap dispenser.
6. Rinse the soap dispenser with water.
7. Dry the soap dispenser with a towel.
8. Reattach the soap dispenser to the pressure washer.

How do I increase the water pressure to my SunJoe pressure washer soap dispenser?

To increase the water pressure to your SunJoe pressure washer soap dispenser, you can follow these steps:

1. Turn off the pressure washer and disconnect the hose from the water source.
2. Locate the water pressure regulator on the pressure washer.
3. Turn the water pressure regulator clockwise to increase the water pressure.
4. Reattach the hose to the water source and turn on the pressure washer.

How do I adjust the water flow rate to my SunJoe pressure washer soap dispenser?

To adjust the water flow rate to your SunJoe pressure washer soap dispenser, you can follow these steps:

1. Turn off the pressure washer and disconnect the hose from the water source.
2. Locate the water flow regulator on the pressure washer.
3. Turn the water flow regulator clockwise to increase the water flow rate.
4. Reattach the hose to the water source and turn on the pressure washer.

How do I turn on the soap dispenser on my SunJoe pressure washer?

To turn on the soap dispenser on your SunJoe pressure washer, you can follow these steps:

1. Turn on the pressure washer.
2. Press the soap dispenser button.
3. The soap dispenser will start dispensing soap.

How do I troubleshoot a SunJoe pressure washer soap dispenser that is not working?

If your SunJoe pressure washer soap dispenser is not working, you can try troubleshooting the following:

Check the soap dispenser for clogs: If the soap dispenser is clogged, it won’t be able to dispense soap properly. To fix this, you can try cleaning the soap dispenser with a degreaser or a vinegar solution.

Check the water pressure: If the water pressure is too low, the soap dispenser won’t be able to dispense soap properly. To fix this, you can try increasing the water pressure or adjusting the water flow rate.

Check the water flow rate: If the water flow rate is too high, the soap dispenser won’t be able to dispense soap properly. To fix this, you can try decreasing the water flow rate.

Check the soap dispenser for compatibility: If the soap dispenser is not compatible with your pressure washer, it won’t be able to dispense soap properly. To fix this, you can try using a different soap dispenser that is compatible with your pressure washer.

You May Like to Read: Sunjoe Pressure Washer Soap Not Working