Troy Bilt Gas Powered Pressure Washer Pump Not Working [Cause & Proven Fixes]

Your Troy Bilt gas-powered pressure washer is a powerful tool that can make quick work of cleaning your home, car, and outdoor equipment. But when the pump doesn’t work, it can be a major inconvenience. Not only is it frustrating, but it can also be dangerous if you try to use the pressure washer without the pump working properly.

In this guide, I’ll walk you through the steps to troubleshoot a Troy Bilt gas-powered pressure washer pump that isn’t working. I’ll cover the most common causes of the problem, as well as how to fix them. By the end of this guide, you’ll be able to get your pressure washer up and running again in no time.

Reasons Why Troy Bilt Gas Powered Pressure Washer Pump Not Working

No Water Coming Out of the Spray Gun

Plugged or kinked hose:

Check the hose for kinks or obstructions. If the hose is kinked, straighten it out. If the hose is obstructed, clear the obstruction.

Dirty filter:

Clean the filter.

Clogged pump:

Remove the pump from the pressure washer and clean it.

Bad pressure washer pump:

Replace the pressure washer pump.

Pressure Washer Won’t Build Pressure

Low oil level:

Check the oil level and add oil if necessary.

Dirty filter:

Clean the filter.

Clogged pump:

Remove the pump from the pressure washer and clean it.

Bad pressure washer pump:

Replace the pressure washer pump.

Pressure Washer Leaking Oil

Loose oil drain plug:

Tighten the oil drain plug.

Cracked oil pan:

Replace the oil pan.

Bad oil seal:

Replace the oil seal.

Pressure Washer Won’t Start

Bad spark plug:

Replace the spark plug.

Bad fuel filter:

Replace the fuel filter.

Clogged carburetor:

Clean the carburetor.

Bad fuel pump:

Replace the fuel pump.

Bad starter:

Replace the starter.

How to Troubleshoot And Fix: Troy Bilt Gas Powered Pressure Washer Pump Not Working

Symptoms of a Troy Bilt Gas Pressure Washer Pump Not Working

There are a few different symptoms that can indicate that your Troy Bilt gas pressure washer pump is not working properly. These include:

The pressure washer is not producing any pressure:
This is the most obvious symptom, and it can be caused by a number of different problems, such as a clogged filter, a faulty pump, or a problem with the hose.

The pressure washer is producing low pressure:
This can also be caused by a number of different problems, such as a clogged filter, a faulty pump, or a problem with the hose.

The pressure washer is making strange noises:
This could be a sign of a number of different problems, such as a faulty pump, a problem with the valves, or a problem with the engine.

The pressure washer is leaking:
This could be a sign of a number of different problems, such as a faulty pump, a problem with the seals, or a problem with the hose.

How to Troubleshoot a Troy Bilt Gas Pressure Washer Pump

If your Troy Bilt gas pressure washer pump is not working properly, you can troubleshoot the problem by following these steps:

1. Check the filter:
The first thing you should do is check the filter to see if it is clogged. If the filter is clogged, it will restrict the flow of water to the pump, which can cause the pressure washer to not work properly. To check the filter, remove it from the pump and inspect it for any debris. If the filter is clogged, clean it with a brush or replace it with a new one.

2. Check the pump:
If the filter is not clogged, the next thing you should do is check the pump itself. To do this, start the pressure washer and listen for any strange noises. If you hear any strange noises, it could be a sign of a problem with the pump. You can also check the pump for leaks. If you see any leaks, it could be a sign of a problem with the seals.3. Check the hose:
If the filter and pump are not the problem, the next thing you should check is the hose. To check the hose, look for any kinks or damage. If you find any kinks or damage, replace the hose.

4. Check the valves:
If the filter, pump, and hose are not the problem, the next thing you should check is the valves. To check the valves, turn off the pressure washer and disconnect the hose from the pump. Then, use a screwdriver to open the valves. If the valves are stuck, you can try to clean them with a brush or replace them with new ones.

5. Check the engine:
If the filter, pump, hose, and valves are not the problem, the last thing you should check is the engine. To check the engine, start the pressure washer and look for any problems with the spark plug, carburetor, or fuel line. If you find any problems with the engine, you will need to take it to a qualified technician to have it repaired.

How to Fix a Troy Bilt Gas Pressure Washer Pump

Once you have identified the problem with your Troy Bilt gas pressure washer pump, you can fix it by following these steps:

1. Replace the filter:
If the filter is clogged, simply replace it with a new one.

2. Repair or replace the pump:
If the pump is faulty, you will need to either repair it or replace it with a new one.3. Replace the hose:
If the hose is damaged, simply replace it with a new one.

4. Clean or replace the valves:
If the valves are stuck, you can try to clean them with a brush or replace them with new ones.

5. Repair or replace the engine:
If the engine is faulty, you will need to either repair it or replace it with a new one.

Preventing Problems with Your Troy Bilt Gas Pressure Washer Pump

You can help prevent problems with your Troy Bilt gas pressure washer pump by following these tips:

Regularly clean the filter:
The filter is one of the most important parts of your pressure washer, and it is important to keep it clean to prevent it from clogging.

Inspect the pump regularly:
You should regularly inspect the pump for leaks, damage, and other problems.

Replace the hose regularly:
The hose is another important part of your pressure washer, and it is important to replace it regularly

Also Read: Troy Bilt Pressure Washer Detergent Siphon Not Working

FAQs: Troy Bilt Gas Powered Pressure Washer Pump Not Working

Why is my Troy Bilt gas pressure washer pump not working?

There are a few possible reasons why your Troy Bilt gas pressure washer pump might not be working. Here are some of the most common causes:

The pump is not getting enough fuel: Make sure that the fuel tank is full and that the fuel line is clear of debris.

The pump is not getting enough air: Check the air filter for dirt and debris and make sure that it is properly installed.

The pump is overheating: If the pump is running too hot, it can cause the engine to shut down. Allow the pump to cool down before trying to start it again.

The pump is damaged: If the pump is damaged, it will need to be replaced.

How do I fix a Troy Bilt gas pressure washer pump that is not working?

To fix a Troy Bilt gas pressure washer pump that is not working, you will need to identify the cause of the problem. Once you have identified the cause, you can take the following steps to fix the problem:

If the pump is not getting enough fuel, make sure that the fuel tank is full and that the fuel line is clear of debris.

If the pump is not getting enough air, check the air filter for dirt and debris and make sure that it is properly installed.

If the pump is overheating, allow the pump to cool down before trying to start it again.

If the pump is damaged, you will need to replace the pump.

What are the signs of a bad Troy Bilt gas pressure washer pump?

There are a few signs that can indicate that your Troy Bilt gas pressure washer pump is bad. These signs include:

The pump is not generating any pressure.
The pump is making a loud whining or buzzing noise.
The pump is leaking fuel or oil.
The pump is overheating.

If you notice any of these signs, it is important to have the pump inspected by a qualified technician.

How much does it cost to replace a Troy Bilt gas pressure washer pump?

The cost of replacing a Troy Bilt gas pressure washer pump will vary depending on the model of the pressure washer and the type of pump that is needed. In general, you can expect to pay between $50 and $100 for a new pump.

How can I prevent my Troy Bilt gas pressure washer pump from breaking down?

There are a few things you can do to help prevent your Troy Bilt gas pressure washer pump from breaking down. These tips include:

Use the right fuel: Make sure that you are using the correct type of fuel for your pressure washer.

Keep the pump clean: Clean the pump regularly to remove dirt and debris.

Maintain the pump: Follow the manufacturer’s recommendations for maintaining the pump.

Store the pump properly: Store the pump in a cool, dry place when it is not in use.

By following these tips, you can help extend the life of your Troy Bilt gas pressure washer pump.