Troy Bilt Pressure Washer Pump Not Working [Step-By-Step Fixes]

Your Troy-Bilt pressure washer is one of the most valuable tools in your home arsenal. It can help you clean everything from your driveway to your siding to your car. But when the pump doesn’t work, it can be a major inconvenience.

If your Troy-Bilt pressure washer pump isn’t working, don’t despair. In this troubleshooting guide, we’ll walk you through the steps to identify and fix the problem. We’ll also provide tips on how to prevent future problems.

So if your pressure washer is acting up, read on for help getting it back up and running.

Most Common Reasons Of Troy Bilt Pressure Washer Pump Not Working

Most Common Reasons Of Troy Bilt Pressure Washer Pump Not Working

1. No Water Flow

Cause:
The most common reason for a Troy Bilt pressure washer pump not working is no water flow. This can be caused by a number of things, including:

A clogged water filter:
The water filter is located at the inlet of the pressure washer pump. If it becomes clogged, it will restrict the flow of water to the pump, causing it to overheat and shut down.

A kinked or damaged hose:
The hose that connects the pressure washer to the water source can become kinked or damaged, which will also restrict the flow of water to the pump.

A faulty water inlet valve:
The water inlet valve is located on the pressure washer pump. If it is faulty, it may not be able to open fully, which will restrict the flow of water to the pump.

Solution:
To fix a Troy Bilt pressure washer pump that is not working due to no water flow, you will need to identify the cause of the problem and fix it.

If the water filter is clogged,:
remove it and clean it with a brush. If it is damaged, replace it with a new one.

If the hose is kinked or damaged,:
replace it with a new one.

If the water inlet valve is faulty,:
replace it with a new one.

2. No Pressure

Cause:
Another common reason for a Troy Bilt pressure washer pump not working is no pressure. This can be caused by a number of things, including:

A clogged air bleeder screw:
The air bleeder screw is located on the top of the pressure washer pump. If it becomes clogged, it will prevent air from escaping the pump, which will cause the pressure to build up and eventually damage the pump.

A faulty pressure relief valve:
The pressure relief valve is located on the side of the pressure washer pump. If it is faulty, it may not be able to release pressure from the pump properly, which will also cause the pressure to build up and damage the pump.

A faulty pump:
The pump itself may be faulty and not able to generate enough pressure.

Solution:
To fix a Troy Bilt pressure washer pump that is not working due to no pressure, you will need to identify the cause of the problem and fix it.

If the air bleeder screw is clogged,:
remove it and clean it with a brush. If it is damaged, replace it with a new one.

If the pressure relief valve is faulty,:
replace it with a new one.

If the pump is faulty,:
replace it with a new one.

3. The Pump Is Overheating

Cause:
The Troy Bilt pressure washer pump can overheat if it is not used properly or if there is a problem with the pump itself. Some common causes of overheating include:

Running the pressure washer at too high of a pressure:
The pressure washer pump is designed to operate at a specific pressure. If you run the pressure washer at a higher pressure than it is designed for, it will cause the pump to overheat.

Using the pressure washer for too long:
The pressure washer pump is designed to operate for a certain amount of time. If you use the pressure washer for longer than it is designed for, it will cause the pump to overheat.

A faulty pump:
The pump itself may be faulty and not able to cool itself properly.

Solution:
To fix a Troy Bilt pressure washer pump that is overheating, you will need to identify the cause of the problem and fix it.

If you are running the pressure washer at too high of a pressure,:
reduce the pressure setting.

If you are using the pressure washer for too long,:
take breaks in between uses.

If the pump is faulty,:
replace it with a new one.

How to Troubleshoot And Fix: Troy Bilt Pressure Washer Pump Not Working

Symptoms of a Troy Bilt Pressure Washer Pump Not Working

There are a few different symptoms that can indicate that your Troy Bilt pressure washer pump is not working properly. These include:

The pressure washer is not producing any pressure.
The pressure washer is making a whining or buzzing noise.
The pressure washer is leaking water.
The pressure washer is overheating.
The pressure washer is smoking.

If you are experiencing any of these symptoms, it is important to troubleshoot the problem and fix it as soon as possible. A malfunctioning pressure washer can be dangerous, and it can also damage your property.

How to Troubleshoot a Troy Bilt Pressure Washer Pump

To troubleshoot a Troy Bilt pressure washer pump, you will need to:

1. Inspect the pump for damage. Look for any cracks, leaks, or other signs of damage. If you find any damage, you will need to replace the pump.
2. Check the hoses for kinks or obstructions. Make sure that the hoses are not kinked or obstructed, as this can prevent the pump from working properly.
3. Check the water filter. The water filter can become clogged with dirt and debris, which can prevent the pump from working properly. To clean the water filter, remove it from the pump and rinse it under warm water.
4. Check the oil level. The pump needs to have the correct amount of oil in order to work properly. To check the oil level, remove the oil dipstick and check the level of oil. If the oil level is low, you will need to add oil to the pump.
5. Check the pressure switch. The pressure switch controls the flow of water to the pump. If the pressure switch is not working properly, it can prevent the pump from working properly. To test the pressure switch, turn on the pressure washer and listen for the pressure switch to click. If the pressure switch does not click, you will need to replace it.

How to Fix a Troy Bilt Pressure Washer Pump

If you have troubleshooted the problem and determined that the pump is the source of the issue, you will need to fix the pump. To fix the pump, you will need to:

1. Remove the pump from the pressure washer.
2. Inspect the pump for damage. Look for any cracks, leaks, or other signs of damage. If you find any damage, you will need to replace the pump.
3. Replace the seals and gaskets. The seals and gaskets can wear out over time, which can cause leaks. To replace the seals and gaskets, you will need to remove the old seals and gaskets and install new ones.
4. Rebuild the pump. If the pump is not damaged, you will need to rebuild it. To rebuild the pump, you will need to remove the old parts and install new parts.

Once you have rebuilt the pump, you can reinstall it on the pressure washer. Be sure to test the pressure washer before using it to make sure that the pump is working properly.

Preventing Troy Bilt Pressure Washer Pump Problems

There are a few things you can do to prevent Troy Bilt pressure washer pump problems:

Inspect the pump regularly for damage:
Look for any cracks, leaks, or other signs of damage. If you find any damage, you should have the pump repaired or replaced as soon as possible.

Keep the hoses free of kinks and obstructions:
Kinks and obstructions can prevent the pump from working properly. Make sure that the hoses are not kinked or obstructed.

Clean the water filter regularly:
The water filter can become clogged with dirt and debris, which can prevent the pump from working properly. Clean the water filter regularly to prevent this from happening.

Use the correct amount of oil in the pump:
The pump needs to have the correct amount of oil in order to work properly. Be sure to check the oil level regularly and add oil as needed.

Don’t overload the pump:
The pump should not be overloaded. Overloading the pump can damage the pump and shorten its lifespan.

By following these tips, you can help to prevent Troy Bilt pressure washer pump problems.

FAQs: Troy Bilt Pressure Washer Pump Not Working

Why is my Troy Bilt pressure washer pump not working?

There are a few possible reasons why your Troy Bilt pressure washer pump might not be working. Here are some of the most common causes:

The pump is not getting enough water: Make sure that the water supply to the pump is turned on and that the hose is not kinked or blocked.

The pump is clogged: The pump can become clogged with dirt, debris, or mineral deposits. To clean the pump, disconnect the hose from the pump and remove the inlet screen. Use a brush or a toothpick to remove any debris that is blocking the screen.

The pump is overheating: The pump can overheat if it is used for too long or if the water is too hot. To prevent the pump from overheating, allow it to cool down for a few minutes before using it again.

The pump is damaged: If the pump is damaged, it will need to be replaced.

What can I do to fix my Troy Bilt pressure washer pump?

If your Troy Bilt pressure washer pump is not working, you can try the following troubleshooting steps:

1. Check the water supply: Make sure that the water supply to the pump is turned on and that the hose is not kinked or blocked.
2. Clean the pump: Disconnect the hose from the pump and remove the inlet screen. Use a brush or a toothpick to remove any debris that is blocking the screen.
3. Let the pump cool down: If the pump is overheating, allow it to cool down for a few minutes before using it again.
4. Replace the pump: If the pump is damaged, it will need to be replaced.

How do I prevent my Troy Bilt pressure washer pump from breaking down?

There are a few things you can do to prevent your Troy Bilt pressure washer pump from breaking down:

Use the pump according to the manufacturer’s instructions: Do not exceed the maximum pressure or flow rate of the pump.

Clean the pump regularly: Disconnect the hose from the pump and remove the inlet screen. Use a brush or a toothpick to remove any debris that is blocking the screen.

Let the pump cool down after each use: Do not store the pump while it is still hot.

Store the pump in a cool, dry place: Do not expose the pump to extreme temperatures or humidity.

What is the warranty on a Troy Bilt pressure washer pump?

The warranty on a Troy Bilt pressure washer pump varies depending on the model. For more information, please consult your owner’s manual or contact Troy Bilt customer service.

Where can I get a replacement Troy Bilt pressure washer pump?

You can purchase a replacement Troy Bilt pressure washer pump from a variety of retailers, including online retailers, home improvement stores, and auto parts stores. You can also contact Troy Bilt customer service to order a replacement pump.

You May Like to Read: Troy Bilt Pressure Washer Siphon Not Working