Stihl Chainsaw Not Starting: 5 Common Causes

Stihl Chainsaw Won’t Start Here’s Why

A brand new Stihl chainsaw is a powerful and efficient tool that can make quick work of any cutting job. But what happens when your new chainsaw won’t start It can be frustrating, but there are a few common reasons why this might happen. In this blog post, we’ll take a look at some of the most common reasons why a Stihl chainsaw won’t start and how to fix them.

Why Brand New Stihl Chainsaw Won’T Start

Stihl Chainsaw Not Starting: 5 Common Causes

1. Dirty air filter:
A dirty air filter can restrict airflow to the engine, making it difficult to start. Clean the air filter according to the manufacturer’s instructions.

2. Low oil level:
A low oil level can cause the engine to seize up, making it impossible to start. Check the oil level and add oil as needed.3. Spark plug problems:
A faulty spark plug can prevent the engine from firing. Check the spark plug and replace it if necessary.

4. Clogged carburetor:
A clogged carburetor can prevent the engine from getting the proper amount of fuel, making it difficult to start. Clean the carburetor according to the manufacturer’s instructions.

5. Bad starter:
A bad starter can prevent the engine from turning over, making it impossible to start. Replace the starter if necessary.

Why is My Brand New Stihl Chainsaw Not Starting?

There are a few possible reasons why your brand new Stihl chainsaw might not be starting. Here are some of the most common causes and solutions:

1. The chainsaw is not getting enough fuel

Make sure that the fuel tank is full and that the fuel line is clear of any obstructions.
Check the fuel filter to make sure that it is not clogged.
If the chainsaw is still not starting, try using a different type of fuel.

2. The spark plug is not firing

Remove the spark plug and check the gap. The gap should be between 0.025 and 0.030 inches.
If the gap is incorrect, adjust it using a spark plug gap tool.
Clean the spark plug with a wire brush.
If the spark plug is damaged, replace it with a new one.

3. The carburetor is not adjusted properly

The carburetor controls the amount of fuel and air that is mixed together to create the fuel-air mixture that is necessary for the chainsaw to start. If the carburetor is not adjusted properly, the chainsaw may not start or may run poorly.
To adjust the carburetor, you will need to consult the owner’s manual for your specific chainsaw model.

4. The chainsaw is flooded

If the chainsaw is flooded, it will not start because the engine is flooded with fuel.
To clear a flooded chainsaw, turn the fuel off and pull the choke out all the way.
Then, crank the engine over a few times without the choke engaged.
Once the engine starts, let it run for a few minutes before re-engaging the choke.

5. The chainsaw is not getting enough air

If the chainsaw is not getting enough air, it will not start because the engine will not be able to create a proper fuel-air mixture.
Make sure that the air filter is clean and that there are no obstructions in the air intake.
If the air filter is dirty, replace it with a new one.

6. The chainsaw is not being used properly

If the chainsaw is not being used properly, it may not start or may run poorly.
Make sure that you are using the correct type of fuel and that you are mixing the fuel and oil properly.
Also, make sure that you are using the chainsaw in the correct way.

If you have tried all of these solutions and your chainsaw still won’t start, it is best to take it to a qualified service technician for further diagnosis and repair.

Also Read: Why Can’T I Keep My Chainsaw Sharp

FAQs

Why won’t my brand new Stihl chainsaw start?

There are a few possible reasons why your brand new Stihl chainsaw won’t start. Here are the most common ones:

The chainsaw is not getting enough fuel: Make sure that the fuel tank is full and that the fuel line is clear of any obstructions.

The chainsaw is not getting enough air: Check the air filter to make sure that it is clean and free of debris.

The spark plug is fouled: Remove the spark plug and clean it with a spark plug cleaner.

The chainsaw is flooded: If the chainsaw has been sitting for a long time, it may be flooded with fuel. Try to clear the flood by turning the chainsaw over a few times without starting it.

The chainsaw is out of commission: If none of the above solutions work, it is possible that the chainsaw is out of commission. Contact your local Stihl dealer for assistance.

How do I start my brand new Stihl chainsaw?

To start your brand new Stihl chainsaw, follow these steps:

1. Make sure that the chainsaw is turned off and that the chain brake is engaged.
2. Place the chainsaw on a flat surface.
3. Pull the choke lever to the choke position.
4. Turn the ignition switch to the On position.
5. Grasp the starter rope with both hands and pull it slowly until you feel resistance.
6. Pull the starter rope quickly and firmly until the engine starts.
7. Release the choke lever and let the engine warm up for a few minutes.
8. Engage the chain brake and start cutting.

What is the difference between a Stihl chainsaw and a Husqvarna chainsaw?

Stihl and Husqvarna are two of the leading manufacturers of chainsaws in the world. Both companies produce high-quality chainsaws that are suitable for a variety of applications. However, there are some key differences between the two brands.

Stihl chainsaws are known for their power and durability: They are often used by professionals for heavy-duty tasks such as felling trees and clearing brush.

Husqvarna chainsaws are known for their versatility and ease of use: They are a good choice for homeowners and hobbyists who need a chainsaw for a variety of tasks.

Stihl chainsaws are typically more expensive than Husqvarna chainsaws: However, they are also built to last longer and perform better.

Ultimately, the best chainsaw for you depends on your needs and budget. If you are looking for a powerful and durable chainsaw for heavy-duty tasks, a Stihl chainsaw is a good option. If you are looking for a versatile and easy-to-use chainsaw for a variety of tasks, a Husqvarna chainsaw is a good choice.

How do I maintain my Stihl chainsaw?

To keep your Stihl chainsaw in good working order, it is important to maintain it regularly. Here are a few tips for maintaining your Stihl chainsaw:

Inspect the chainsaw before each use: Check for any damage or wear and tear.

Sharpen the chain regularly: A dull chain can be dangerous and will not cut as efficiently.

Clean the chainsaw after each use: Remove any dirt, debris, or sawdust from the chainsaw.

Lubricate the chainsaw regularly: Use a quality chainsaw oil to lubricate the chain and bar.

Inspect the air filter regularly: Clean or replace the air filter as needed.

Tune up the chainsaw annually: A professional can tune up your chainsaw and make sure that it is running properly.

By following these tips, you can help to extend the life of your Stihl chainsaw and keep it running smoothly.

What are the safety precautions I should take when using a Stihl chainsaw?

When using a Stihl chainsaw, it is important to take the following safety precautions:

Wear proper safety gear: This includes a hard hat, safety glasses, hearing protection, gloves, and a chainsaw chaps.

Be aware of your surroundings: Make sure that you have a clear work area and that there are no people or animals in the area.

Start the chainsaw with the chain brake engaged: This will help to prevent the chain from starting to move when you are not ready.

Never touch the chain while the chainsaw is running: The chain is very sharp and can cause serious injury.

Keep the chain sharp: A