Why Does Your Chainsaw Keep Cutting Out?

Chainsaw keeps cutting out

A chainsaw is a powerful tool that can be used for a variety of tasks, from cutting down trees to trimming branches. However, if your chainsaw keeps cutting out, it can be a major inconvenience. There are a number of reasons why this might happen, and in this blog post, we will discuss the most common causes and how to fix them. So, if your chainsaw is giving you trouble, keep reading for some helpful tips!

Why Does Chainsaw Keep Cutting Out

Why Does Your Chainsaw Keep Cutting Out?

There are a few reasons why your chainsaw might keep cutting out.

Low oil level:

Make sure the oil level is correct. If the oil level is too low, the chainsaw will not be able to lubricate the chain properly, which can cause it to overheat and cut out.

Dirty air filter:

A dirty air filter can restrict airflow to the engine, which can cause it to overheat and cut out.

Clogged fuel filter:

A clogged fuel filter can prevent fuel from reaching the engine, which can also cause it to overheat and cut out.

Spark plug problems:

A faulty spark plug can prevent the engine from firing properly, which can cause it to cut out.

Bad carburetor:

A carburetor that is not adjusted properly can cause the engine to run too rich or too lean, which can both lead to the engine cutting out.

If your chainsaw keeps cutting out, try to identify the cause and correct it. If you are unable to fix the problem yourself, take your chainsaw to a qualified service technician.

Why Does My Chainsaw Keep Cutting Out?

Possible Causes

There are a number of possible reasons why your chainsaw might keep cutting out. Some of the most common causes include:

A dull chain:

A dull chain will not be able to cut through wood efficiently, and it will also cause the saw to work harder than necessary. This can lead to the saw overheating and cutting out.

A dirty chain:

A dirty chain can also cause the saw to overheat and cut out. Make sure to clean the chain regularly with a wire brush or a chainsaw cleaning tool.

A poorly adjusted chain:

The chain on your chainsaw should be properly adjusted so that it is not too tight or too loose. If the chain is too tight, it will be difficult to turn and will cause the saw to work harder than necessary. If the chain is too loose, it will be more likely to come off the bar.

A clogged air filter:

A clogged air filter can restrict the flow of air to the engine, which can cause the engine to overheat and cut out. Make sure to clean the air filter regularly according to the manufacturer’s instructions.

A dirty carburetor:

A dirty carburetor can cause the engine to run poorly and cut out. If you think your carburetor is dirty, you should have it cleaned by a qualified technician.

A bad spark plug:

A bad spark plug can prevent the engine from starting or running properly, which can lead to the saw cutting out. If you think your spark plug is bad, you should replace it with a new one.

Troubleshooting Tips

If your chainsaw keeps cutting out, here are a few troubleshooting tips that you can try:

Check the chain:

Make sure the chain is sharp and clean. If the chain is dull, sharpen it; if the chain is dirty, clean it.

Adjust the chain:

Make sure the chain is properly adjusted. If the chain is too tight, loosen it; if the chain is too loose, tighten it.

Clean the air filter:

Remove the air filter and clean it with a clean, dry cloth.

Clean the carburetor:

If you think the carburetor is dirty, have it cleaned by a qualified technician.

Replace the spark plug:

If you think the spark plug is bad, replace it with a new one.

If you have tried all of these troubleshooting tips and your chainsaw is still cutting out, you should take it to a qualified technician for further diagnosis and repair.

Preventative Maintenance

The best way to prevent your chainsaw from cutting out is to perform regular maintenance. This includes:

Sharpening the chain regularly
Cleaning the chain regularly
Adjusting the chain regularly
Cleaning the air filter regularly
Cleaning the carburetor regularly
Replacing the spark plug regularly

By following these simple maintenance tips, you can help to keep your chainsaw running smoothly and prevent it from cutting out.

Also Read: Why Does My Chain Keep Falling Off Chainsaw

FAQs: Why Does My Chainsaw Keep Cutting Out?

What are the most common reasons why a chainsaw keeps cutting out?

The chain is too tight: If the chain is too tight, it will put too much strain on the engine and cause it to stall. To check the chain tension, hold the chainsaw level and let the chain hang loosely. The chain should be about 1/8 to 1/4 away from the bar. If the chain is too tight, loosen the chain tensioner until the correct clearance is achieved.

The chain is too loose: If the chain is too loose, it will not be able to grip the wood properly and will cause the chainsaw to stall. To check the chain tension, hold the chainsaw level and let the chain hang loosely. The chain should be about 1/8 to 1/4 away from the bar. If the chain is too loose, tighten the chain tensioner until the correct clearance is achieved.

The carburetor is dirty or out of adjustment: A dirty or out-of-adjustment carburetor can cause the chainsaw to stall because it is not getting the correct amount of fuel. To clean the carburetor, remove the air filter and carburetor cover. Use a carburetor cleaner to clean the carburetor jets and passages. Reassemble the carburetor and adjust the idle speed and fuel mixture according to the manufacturer’s instructions.

The spark plug is fouled or damaged: A fouled or damaged spark plug can cause the chainsaw to stall because it is not getting a spark. To check the spark plug, remove it from the chainsaw and inspect it for damage. If the spark plug is fouled, clean it with a spark plug cleaner. If the spark plug is damaged, replace it with a new one.

The air filter is dirty: A dirty air filter can restrict the flow of air to the carburetor, which can cause the chainsaw to stall. To clean the air filter, remove it from the chainsaw and rinse it with warm water. Allow the air filter to dry completely before reinstalling it.

What should I do if my chainsaw keeps cutting out?

Check the chain tension: If the chain is too tight or too loose, it can cause the chainsaw to stall. To check the chain tension, hold the chainsaw level and let the chain hang loosely. The chain should be about 1/8 to 1/4 away from the bar. If the chain is too tight, loosen the chain tensioner until the correct clearance is achieved. If the chain is too loose, tighten the chain tensioner until the correct clearance is achieved.

Clean the carburetor: A dirty or out-of-adjustment carburetor can cause the chainsaw to stall. To clean the carburetor, remove the air filter and carburetor cover. Use a carburetor cleaner to clean the carburetor jets and passages. Reassemble the carburetor and adjust the idle speed and fuel mixture according to the manufacturer’s instructions.

Replace the spark plug: A fouled or damaged spark plug can cause the chainsaw to stall. To check the spark plug, remove it from the chainsaw and inspect it for damage. If the spark plug is fouled, clean it with a spark plug cleaner. If the spark plug is damaged, replace it with a new one.

Clean the air filter: A dirty air filter can restrict the flow of air to the carburetor, which can cause the chainsaw to stall. To clean the air filter, remove it from the chainsaw and rinse it with warm water. Allow the air filter to dry completely before reinstalling it.

Take your chainsaw to a qualified service technician: If you have tried the above steps and your chainsaw is still cutting out, it is best to take it to a qualified service technician for diagnosis and repair.

How can I prevent my chainsaw from cutting out?

Keep the chain tensioned properly: A properly tensioned chain will not put too much strain on the engine and will help to prevent it from stalling. To check the chain tension, hold the chainsaw level and let the chain hang loosely. The chain should be about 1/8 to 1/4 away from the bar. If the chain is too tight, loosen the chain tensioner until the correct clearance is achieved. If the chain is too loose, tighten the chain tensioner until the correct clearance is achieved.

Clean the carburetor regularly: A dirty or out-of-adjustment carburetor can cause the chainsaw to stall. To clean the carburetor, remove the air filter and carburetor cover. Use a carburetor cleaner to clean the carburetor jets and passages. Reassemble the carburetor and adjust the idle speed and fuel mixture according to the manufacturer’s instructions.

Replace