Why Is Your Blue Max Chainsaw Blade Not Working?

Chainsaw Blade Not Working Here’s Why and How to Fix It

Your chainsaw is one of the most important tools in your arsenal, but it can be frustrating when it doesn’t work properly. If your chainsaw blade is not working, there are a few possible causes. In this blog post, we will discuss the most common reasons why a chainsaw blade might not be working and how to fix it.

We will also provide some tips on how to prevent your chainsaw blade from becoming damaged in the future. So, if your chainsaw blade is not working, read on to find out what the problem is and how to fix it!

Why Is The Blade Not Working On Blue Max Chainsaw

Why Is Your Blue Max Chainsaw Blade Not Working?

There are a few reasons why your Blue Max chainsaw blade might not be working.

The chain is dull:
The most common reason for a chainsaw blade not working is that the chain is dull. To check if the chain is dull, run your finger along the teeth. If they are rounded and smooth, the chain is dull and needs to be sharpened.

The chain is too tight:
If the chain is too tight, it will not be able to move freely and will bind up. To check if the chain is too tight, try to move it back and forth by hand. If it is difficult to move, the chain is too tight and needs to be loosened.

The chain is too loose:
If the chain is too loose, it will come off the bar and could be dangerous. To check if the chain is too loose, try to shake the bar. If the chain moves more than a few millimeters, the chain is too loose and needs to be tightened.

The bar is bent:
If the bar is bent, the chain will not be able to track properly and will jump off the bar. To check if the bar is bent, sight down the bar from the tip to the base. If the bar is not straight, it needs to be straightened.

The sprocket is worn out:
If the sprocket is worn out, the chain will not be able to grip it properly and will slip. To check if the sprocket is worn out, look at the teeth. If they are rounded and smooth, the sprocket is worn out and needs to be replaced.

Why is the Blade Not Working on Blue Max Chainsaw?

Possible Causes

There are a few possible causes for a Blue Max chainsaw blade not working.

The chain is too loose:
If the chain is too loose, it will not be able to grip the wood properly and will slip. This can cause the chain to jump off the bar, which can be dangerous. To check the chain tension, follow the instructions in your chainsaw owner’s manual.

The chain is too tight:
If the chain is too tight, it will be difficult to turn the chainsaw and can cause the engine to overheat. To check the chain tension, follow the instructions in your chainsaw owner’s manual.

The chain is dull:
A dull chain will not be able to cut through wood effectively. This can cause the chain to skip and jump, which can be dangerous. To sharpen the chain, you can use a chainsaw file or take it to a professional.

The bar is damaged:
If the bar is damaged, it can cause the chain to jump off the bar. To check the bar, look for any cracks or bends. If the bar is damaged, you will need to replace it.

The sprocket is damaged:
The sprocket is the gear that drives the chain. If the sprocket is damaged, it can cause the chain to jump off the bar. To check the sprocket, look for any cracks or missing teeth. If the sprocket is damaged, you will need to replace it.

The engine is not getting enough fuel:
If the engine is not getting enough fuel, it will not be able to turn the chain. To check the fuel level, look at the fuel tank. If the tank is empty, fill it up with fresh fuel.

The carburetor is dirty:
If the carburetor is dirty, it can cause the engine to run poorly and not get enough fuel. To clean the carburetor, you will need to remove it from the chainsaw and follow the instructions in your chainsaw owner’s manual.

The spark plug is bad:
If the spark plug is bad, it will not be able to produce a spark, which is necessary for the engine to run. To check the spark plug, remove it from the engine and look at the electrode. If the electrode is covered in deposits, clean it with a wire brush. If the spark plug is cracked or damaged, you will need to replace it.

Troubleshooting Steps

If your Blue Max chainsaw blade is not working, you can try the following troubleshooting steps:

1. Check the chain tension. If the chain is too loose or too tight, adjust it according to the instructions in your chainsaw owner’s manual.
2. Sharpen the chain. If the chain is dull, sharpen it with a chainsaw file or take it to a professional.
3. Check the bar. If the bar is damaged, replace it.
4. Check the sprocket. If the sprocket is damaged, replace it.
5. Check the fuel level. If the tank is empty, fill it up with fresh fuel.
6. Clean the carburetor. If the carburetor is dirty, clean it according to the instructions in your chainsaw owner’s manual.
7. Replace the spark plug. If the spark plug is bad, replace it.

If you have tried all of these troubleshooting steps and your chainsaw blade is still not working, you may need to take it to a professional for repairs.

Also Read: Basic Reasons Why A Chainsaw Won’T Start

FAQs: Why is the blade not working on my Blue Max chainsaw?

Question 1: What could be the reason why my chainsaw blade is not working?

The chain is dull.
The chain is not properly tensioned.
The chain is not aligned with the bar.
The bar is damaged.
The chainsaw is not getting enough oil.

Question 2: How can I tell if my chainsaw blade is dull?

The chain is difficult to pull.
The chain is skipping or jumping.
The chain is leaving a rough cut.
The chain is smoking.

Question 3: How can I properly tension the chain on my chainsaw?

1. Turn off the chainsaw and allow it to cool down.
2. Loosen the chain tensioning screw.
3. Move the chain up and down the bar until it is snug against the bar rails.
4. Tighten the chain tensioning screw until the chain is snug against the bar rails, but not so tight that it is difficult to move.
5. Re-start the chainsaw and test the chain tension.

Question 4: How can I align the chain on my chainsaw?

1. Turn off the chainsaw and allow it to cool down.
2. Remove the chain from the bar.
3. Align the cutting edges of the chain with the bar rails.
4. Reattach the chain to the bar.
5. Re-start the chainsaw and test the chain alignment.

Question 5: How can I tell if my chainsaw bar is damaged?

The bar is bent.
The bar is cracked.
The bar is worn out.

Answer: If you suspect that your chainsaw bar is damaged, you should take it to a qualified service technician for inspection and repair.