Why Won’t My Chainsaw Chain Move?

Your Chainsaw Chain Won’t Move Here’s Why and How to Fix It

Your chainsaw is one of the most important tools in your arsenal, but it can be frustrating when it doesn’t work properly. One common problem is when the chain won’t move. This can be caused by a number of factors, but most of the time it’s an easy fix.

In this blog post, I’ll explain why your chainsaw chain might not be moving and how to fix it. I’ll also provide some tips on how to prevent this problem from happening in the future.

So if your chainsaw chain is stuck, don’t despair! Read on to find out how to get it moving again.

Why Won’T My Chain Move On My Chainsaw

There are a few reasons why your chainsaw chain might not be moving.

The chain is too tight:
If the chain is too tight, it will not be able to move freely around the guide bar. To check the chain tension, use a chain tension gauge. If the chain is too tight, loosen the chain tensioner screw until the gauge reads the correct tension.

The chain is too loose:
If the chain is too loose, it will come off the guide bar. To check the chain tension, use a chain tension gauge. If the chain is too loose, tighten the chain tensioner screw until the gauge reads the correct tension.

The chain is dirty:
A dirty chain will not move freely around the guide bar. To clean the chain, use a soft brush to remove any dirt or debris.

The chain is dull:
A dull chain will not be able to cut through wood effectively. To sharpen the chain, use a chainsaw chain sharpener.

The chainsaw is not getting enough oil:
If the chainsaw is not getting enough oil, the chain will become dry and will not move freely around the guide bar. To check the oil level, remove the oil cap and look inside the oil tank. The oil level should be between the full and add marks. If the oil level is low, add oil to the tank until it reaches the full mark.

If you have checked all of these things and your chainsaw chain still won’t move, you may need to take it to a professional for repair.

Why Won’t My Chain Move on My Chainsaw?

There are a few possible reasons why your chainsaw chain might not be moving.

The chain brake is engaged:
This is the most common reason why a chainsaw chain won’t move. To release the chain brake, simply press the lever on the side of the chainsaw.

The chain is too tight:
If the chain is too tight, it will not be able to move freely around the bar. To loosen the chain, use the chain tensioner located on the side of the chainsaw.

The chain is too loose:
If the chain is too loose, it will come off the bar. To tighten the chain, use the chain tensioner located on the side of the chainsaw.

The bar is bent:
If the bar is bent, it will not be able to guide the chain properly. To check if the bar is bent, sight down the bar from the front to the back. If the bar is not straight, it will need to be replaced.

The sprocket is worn out:
The sprocket is the gear that drives the chain. If the sprocket is worn out, it will not be able to turn the chain. To check if the sprocket is worn out, look at the teeth. If the teeth are rounded or chipped, the sprocket will need to be replaced.

The chain oil is low:
The chain oil lubricates the chain and helps it to move smoothly. If the chain oil is low, the chain will not be able to move properly. To check the chain oil level, look at the sight glass located on the side of the chainsaw. If the level is low, add more chain oil.

If you have tried all of these things and your chainsaw chain still won’t move, it is possible that there is a more serious problem with the chainsaw. In this case, it is best to take the chainsaw to a qualified repair technician.

Also Read: Why Won’T My Chainsaw Blade Spin

FAQs: Why Won’t My Chain Move on My Chainsaw?

Why won’t my chainsaw chain move?

There are a few possible reasons why your chainsaw chain might not be moving. Here are some of the most common causes:

The chain is too tight: If the chain is too tight, it will not be able to move freely around the bar. To check the chain tension, use a chain tension gauge. If the chain is too tight, loosen the tensioner screw until the gauge reads the correct tension.

The chain is too loose: If the chain is too loose, it will come off the bar. To check the chain tension, use a chain tension gauge. If the chain is too loose, tighten the tensioner screw until the gauge reads the correct tension.

The bar is bent: If the bar is bent, the chain will not be able to move smoothly around it. To check the bar, look for any bends or kinks. If the bar is bent, you will need to replace it.

The sprocket is worn out: The sprocket is the part of the chainsaw that the chain rides on. If the sprocket is worn out, it will not be able to grip the chain properly. To check the sprocket, look for any damage or wear. If the sprocket is worn out, you will need to replace it.

The chainsaw is not getting enough oil: The chain needs oil to lubricate it and keep it running smoothly. If the chainsaw is not getting enough oil, the chain will become dry and sticky, which will make it difficult to move. To check the oil level, look at the oil reservoir. If the oil level is low, add more oil to the reservoir.

What should I do if my chainsaw chain won’t move?

If your chainsaw chain won’t move, you should first try to identify the cause of the problem. Once you have identified the cause, you can take steps to fix it. Here are some tips on how to fix a chainsaw chain that won’t move:

If the chain is too tight, loosen the tensioner screw until the chain moves freely around the bar:

If the chain is too loose, tighten the tensioner screw until the chain is snug against the bar:

If the bar is bent, you will need to replace it:

If the sprocket is worn out, you will need to replace it:

If the chainsaw is not getting enough oil, add more oil to the reservoir:

If you are unable to fix the problem yourself, you should take your chainsaw to a qualified chainsaw repair technician.

What are some safety precautions I should take when working with a chainsaw?

When working with a chainsaw, it is important to take precautions to protect yourself from injury. Here are some safety tips:

Wear proper safety gear, such as a hard hat, safety glasses, hearing protection, and steel-toed boots:

Make sure the chainsaw is in good working order:

Be aware of your surroundings and the potential for hazards:

Never operate a chainsaw while under the influence of drugs or alcohol:

Never operate a chainsaw with one hand:

Never cut through a live tree:

Never cut through a limb that is over your head:

Never cut through a log that is on the ground:

Never pull the starter cord while the chainsaw is running:

Always keep the chain sharp:

Always wear gloves when handling a chainsaw:

Always be aware of the kickback hazard:

What are the different types of chainsaw chains?

There are three main types of chainsaw chains:

Standard chains are the most common type of chain. They are designed for general-purpose cutting.

Barbed chains are designed for cutting through tough materials, such as hardwoods.

Low-profile chains are designed for cutting through small branches and twigs.

Each type of chain has its own advantages and disadvantages. Standard chains are the most versatile, but they are not as efficient as barbed chains for cutting through tough materials. Barbed chains are more efficient for cutting through tough materials, but they are not as safe as standard chains. Low-profile chains are the safest type of chain, but they are not as efficient as standard or barbed chains for cutting through large pieces of wood.

How do I sharpen a chainsaw chain?

To sharpen a chainsaw chain, you